um_methodxl_1c_um-petg-175_0.2mm.inst.cfg 1.9 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667
  1. [general]
  2. definition = ultimaker_methodxl
  3. name = Fast
  4. version = 4
  5. [metadata]
  6. material = ultimaker_petg_175
  7. quality_type = draft
  8. setting_version = 24
  9. type = quality
  10. variant = 1C
  11. weight = -2
  12. [values]
  13. cool_fan_enabled = True
  14. cool_fan_speed = 50
  15. cool_fan_speed_0 = 0
  16. cool_fan_speed_max = 100
  17. cool_min_layer_time = 10
  18. cool_min_speed = 5
  19. initial_layer_line_width_factor = 150
  20. min_bead_width = =line_width * 0.75
  21. min_wall_line_width = =line_width * 0.75
  22. raft_airgap = 0.2
  23. raft_base_infill_overlap = 10
  24. raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8
  25. raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4
  26. raft_base_thickness = 0.6
  27. raft_interface_infill_overlap = 35
  28. raft_interface_line_spacing = 0.75
  29. raft_interface_speed = 40
  30. raft_speed = 15
  31. raft_surface_infill_overlap = 25
  32. raft_surface_line_spacing = 0.425
  33. raft_surface_line_width = 0.4
  34. raft_surface_speed = 40
  35. raft_surface_wall_count = 2
  36. skin_overlap = 10
  37. speed_layer_0 = 15
  38. speed_print = 60
  39. speed_roofing = =speed_print / 3
  40. speed_support = =speed_print
  41. speed_support_interface = 40
  42. speed_topbottom = =speed_print * 0.6
  43. speed_wall = =speed_print / 6
  44. speed_wall_0 = =speed_wall
  45. speed_wall_x = =speed_wall
  46. support_angle = 50.0
  47. support_bottom_distance = =layer_height
  48. support_bottom_enable = False
  49. support_infill_angles = [45 ]
  50. support_infill_rate = 12
  51. support_interface_density = 83
  52. support_interface_height = =layer_height * 4
  53. support_interface_material_flow = =material_flow
  54. support_line_width = =line_width * 0.75
  55. support_material_flow = =material_flow
  56. support_offset = 3
  57. support_roof_density = =support_interface_density
  58. support_roof_line_width = =line_width
  59. support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max
  60. support_top_distance = =support_z_distance
  61. support_xy_distance = 0.3
  62. support_xy_overrides_z = xy_overrides_z
  63. support_z_distance = 0.2
  64. switch_extruder_retraction_amount = 1