Cura/resources/quality/nps/nps_TPU_C.inst.cfg

[general]
definition = nps
name = C
version = 4

[metadata]
material = generic_tpu
quality_type = c
setting_version = 24
type = quality
weight = -1

[values]
cool_fan_enabled = True
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 50
cool_fan_speed_max = 100
cool_min_layer_time = 11
cool_min_layer_time_fan_speed_max = 20
cool_min_speed = 10
material_bed_temperature = 45
material_flow = 101
material_print_temperature = =default_material_print_temperature - 13
material_print_temperature_layer_0 = =215
retraction_extra_prime_amount = 0.2
retraction_hop_only_when_collides = False
retraction_min_travel = =3*line_width
skin_overlap = 5
speed_layer_0 = =math.ceil(speed_print * 20/40)
speed_print = 40
speed_slowdown_layers = 1
speed_topbottom = =math.ceil(speed_print * 27/40)
speed_wall = =math.ceil(speed_print * 40/40)
speed_wall_0 = =math.ceil(speed_print * 30/40)
support_angle = 50
support_bottom_distance = =support_z_distance*0.5
support_interface_density = 100
support_offset = 0.5
support_xy_distance = =line_width * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height*2