ultimaker_s5_cc06.inst.cfg 1.4 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546
  1. [general]
  2. name = CC 0.6
  3. version = 4
  4. definition = ultimaker_s5
  5. [metadata]
  6. setting_version = 15
  7. type = variant
  8. hardware_type = nozzle
  9. [values]
  10. brim_width = 7
  11. machine_nozzle_cool_down_speed = 0.9
  12. machine_nozzle_id = CC 0.6
  13. machine_nozzle_size = 0.6
  14. raft_acceleration = =acceleration_print
  15. raft_airgap = 0.3
  16. raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
  17. raft_interface_line_spacing = =raft_interface_line_width + 0.2
  18. raft_interface_line_width = =line_width * 2
  19. raft_interface_thickness = =layer_height * 1.5
  20. raft_jerk = =jerk_print
  21. raft_margin = 15
  22. raft_surface_layers = 2
  23. retraction_count_max = 25
  24. retraction_min_travel = =line_width * 2
  25. retraction_prime_speed = =retraction_speed
  26. speed_infill = =speed_print
  27. speed_layer_0 = 20
  28. speed_print = 45
  29. speed_support = =speed_topbottom
  30. speed_topbottom = =math.ceil(speed_print * 25 / 45)
  31. speed_travel_layer_0 = 50
  32. speed_wall = =math.ceil(speed_print * 30 / 45)
  33. speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
  34. speed_wall_x = =speed_wall
  35. support_angle = 60
  36. support_bottom_distance = =support_z_distance / 2
  37. support_pattern = zigzag
  38. support_top_distance = =support_z_distance
  39. support_use_towers = True
  40. support_z_distance = =layer_height * 2
  41. switch_extruder_prime_speed = =switch_extruder_retraction_speeds
  42. switch_extruder_retraction_amount = =machine_heat_zone_length
  43. top_bottom_thickness = =layer_height * 6
  44. wall_thickness = =line_width * 3