123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869 |
- [general]
- version = 4
- name = gMax 1.5+ Dual Very Thick Layers
- definition = gmax15plus_dual
- [metadata]
- setting_version = 20
- type = quality
- quality_type = extra_course
- weight = -3
- global_quality = True
- [values]
- layer_height = 0.32
- infill_before_walls = False
- infill_overlap = 20
- infill_pattern = grid
- speed_slowdown_layers = 1
- acceleration_enabled = True
- acceleration_print = 400
- acceleration_travel = 700
- coasting_enable = False
- coasting_volume = 0.0625
- retraction_combing = off
- retraction_amount = 0.75
- retraction_speed = 70
- material_flow = 98
- support_use_towers = False
- support_z_distance = 0.2
- support_xy_distance = 1.5
- support_join_distance = 10
- support_interface_enable = True
- support_interface_pattern = lines
- adhesion_type = skirt
- skirt_gap = 2
- cool_fan_speed = 70
- cool_fan_speed_max = 85
- skin_overlap = 10
- speed_print = 40
- speed_infill = =math.ceil(speed_print * 0.85)
- speed_layer_0 = =math.ceil(speed_print * 0.45)
- speed_topbottom = =math.ceil(speed_print * 0.75)
- speed_wall = =math.ceil(speed_print * 0.5)
- speed_wall_x = =math.ceil(speed_print * 0.7)
- top_bottom_pattern = lines
- top_layers = 3
- top_thickness = 1
- bottom_layers = 2
- wall_line_count = 2
- z_seam_corner = z_seam_corner_none
- ooze_shield_angle = 20
- ooze_shield_dist = 4
- ooze_shield_enabled = True
- prime_tower_enable = False
- prime_tower_position_x = 350
- prime_tower_position_y = 350
- switch_extruder_retraction_amount = 6
- switch_extruder_retraction_speeds = 60
- material_standby_temperature = =material_print_temperature - 10
|