| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081 |
- [general]
- version = 4
- name = Fine
- definition = flsun_sr
- [metadata]
- setting_version = 20
- type = quality
- quality_type = fine
- weight = 1
- global_quality = True
- [values]
- layer_height = 0.12
- layer_height_0 = 0.2
- retraction_combing = noskin
- retraction_combing_max_distance = 10
- speed_slowdown_layers = 5
- travel_retract_before_outer_wall = False
- adhesion_type = skirt
- skirt_line_count = 2
- brim_width = 4.0
- cool_fan_speed = 100
- cool_lift_head = False
- cool_min_layer_time = 4
- infill_before_walls = False
- infill_enable_travel_optimization = False
- infill_support_angle = 50
- ironing_enabled = False
- retract_at_layer_change = False
- retraction_amount = 6.5
- retraction_hop_only_when_collides = True
- skin_no_small_gaps_heuristic = True
- skin_overlap = 10
- small_hole_max_size = 5
- speed_support = 80
- support_enable = True
- support_type = everywhere
- support_wall_count = 1
- support_angle = 60
- support_brim_enable = True
- support_brim_width = 4.0
- support_interface_density = 60
- support_interface_enable = True
- support_interface_height = 0.96
- support_interface_pattern = grid
- support_interface_skip_height = 0.12
- support_roof_density = 60
- support_xy_distance = 0.5
- support_z_distance = 0.2
- top_bottom_thickness = =layer_height*7
- travel_avoid_other_parts = True
- travel_avoid_supports = True
- acceleration_enabled = False
- jerk_enabled = False
- infill_pattern = grid
- ironing_only_highest_layer = True
- jerk_travel = 25
- jerk_travel_layer_0 = 20
- jerk_wall_0 = 10
- material_flow_dependent_temperature = False
- material_initial_print_temperature = 210
- material_final_print_temperature = 210
- material_print_temperature = 210
- material_print_temperature_layer_0 = 210
- material_bed_temperature_layer_0 = 60
- optimize_wall_printing_order = True
- retraction_hop = 0.3
- retraction_hop_enabled = True
- retraction_speed = 40
- small_feature_speed_factor = 60
- speed_infill = 100
- speed_layer_0 = 25
- speed_print = 80
- speed_topbottom = 50
- speed_travel = 120
- speed_travel_layer_0 = 40
- speed_z_hop = 50
- wall_thickness = =line_width*3
- z_seam_corner = z_seam_corner_inner
- z_seam_type = sharpest_corner
|
