Cura/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg

[general]
version = 2
name = Draft Print
definition = ultimaker3

[metadata]
type = quality
quality_type = draft
material = generic_cpe_ultimaker3_AA_0.4
weight = -2

[values]
material_print_temperature = =default_material_print_temperature + 10
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_standby_temperature = 100
skin_overlap = 20
speed_print = 60
speed_layer_0 = 20
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
wall_thickness = 1