Cura/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg

[general]
version = 4
name = Fast
definition = ultimaker_s5

[metadata]
setting_version = 20
type = quality
quality_type = draft
weight = -2
material = generic_cpe
variant = AA 0.4

[values]
material_print_temperature = =default_material_print_temperature + 10
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
retraction_combing_max_distance = 50
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_print = 60
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
speed_infill = =math.ceil(speed_print * 50 / 60)