| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354 |
- {
- "name": "Neptune 2D",
- "version": 2,
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Toylerrr",
- "manufacturer": "Elegoo",
- "platform": "elegoo_neptune_2.stl",
- "platform_offset": [0,0,0],
- "has_machine_quality": true,
- "preferred_quality_type": "normal",
- "file_formats": "text/x-gcode",
- "machine_extruder_trains":
- {
- "0": "elegoo_neptune2D_extruder_0",
- "1": "elegoo_neptune2D_extruder_1"
- }
- },
- "overrides": {
- "machine_name": {"default_value": "ELEGOO Neptune 2D"},
- "machine_extruder_count": {"default_value": 2},
- "machine_width": {"default_value": 235},
- "machine_height": {"default_value": 260},
- "machine_depth": {"default_value": 235},
- "machine_heated_bed": {"default_value": true},
- "material_diameter": { "default_value": 1.75 },
- "machine_head_with_fans_polygon": {"value": [[-30, 35], [-30, -10], [25, 35], [25, -10]]},
- "gantry_height": {"value": 30},
- "machine_extruders_share_heater": {"default_value": true},
- "machine_extruders_share_nozzle": {"default_value": true},
- "machine_always_write_active_tool": {"default_value": true},
- "prime_blob_enable": {"default_value": false},
- "prime_tower_enable": {"default_value": true},
- "prime_tower_size": {"default_value": 30},
- "prime_tower_min_volume": {"default_value": 90},
- "speed_print": { "value": 60.0 },
- "z_seam_type":{"default_value": "back"},
- "z_seam_corner":{"default_value": "z_seam_corner_weighted"},
- "material_standby_temperature":{"default_value": 200,"settable_per_extruder": false},
- "retraction_enable":{"default_value": true},
- "retraction_amount":{"default_value": 5},
- "retraction_speed":{"default_value": 70},
- "adhesion_type":{"default_value": "skirt"},
- "raft_margin":{"default_value": 5},
- "raft_airgap":{"default_value": 0.25},
- "brim_width":{"default_value": 5},
- "skin_angles":{"default_value": [45, 135]},
- "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"},
- "machine_start_gcode": {"default_value": ";simage\n;gimage\nG28 ;home\n;G29 ;Run ABL\n;M420 S1 ;Enable ABL mesh\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X2.0 Y20 Z0.28 F5000.0 ;Move to start position\nG1 E90 F1200 ;Load filament\nG92 E0 ;Reset Extruder\nG1 X2.0 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X2.3 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X2.3 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up"},
- "machine_end_gcode": {"default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-80 Z0.2 F1600 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"}
- }
- }
|
