Cura/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg

[general]
version = 4
name = Normal
definition = ultimaker3

[metadata]
setting_version = 5
type = quality
quality_type = fast
weight = -1
material = generic_cpe
variant = AA 0.4

[values]
cool_min_speed = 7
material_print_temperature = =default_material_print_temperature + 5
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_standby_temperature = 100
prime_tower_purge_volume = 1
speed_print = 60
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_wall = =math.ceil(speed_print * 40 / 60)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)