um2p_cpep_0.6_normal.inst.cfg 1.1 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker2_plus
  5. [metadata]
  6. setting_version = 5
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_cpe_plus
  11. variant = 0.6 mm
  12. [values]
  13. adhesion_type = raft
  14. cool_fan_speed = 45
  15. cool_fan_speed_min = =cool_fan_speed * 25 / 45
  16. cool_min_layer_time = 3
  17. cool_min_speed = 8
  18. infill_overlap = 5
  19. infill_sparse_density = 35
  20. layer_0_z_overlap = 0.22
  21. layer_height = 0.22
  22. line_width = 0.57
  23. raft_airgap = 0.37
  24. raft_base_line_spacing = 2.4
  25. raft_base_line_width = 1.2
  26. raft_interface_line_spacing = 1.4
  27. raft_interface_line_width = 1.2
  28. raft_margin = 15
  29. raft_surface_line_width = 0.57
  30. raft_surface_thickness = 0.2
  31. speed_layer_0 = =math.ceil(speed_print * 30 / 35)
  32. speed_print = 35
  33. speed_topbottom = =math.ceil(speed_print * 20 / 35)
  34. speed_travel = 150
  35. speed_wall_0 = =math.ceil(speed_print * 30 / 35)
  36. speed_wall_x = =speed_print
  37. support_angle = 45
  38. support_enable = True
  39. support_infill_rate = 20
  40. support_line_distance = 2.85
  41. support_pattern = lines
  42. support_xy_distance = 0.6
  43. support_z_distance = 0.22
  44. top_bottom_thickness = 0.75
  45. wall_thickness = 1.14