um2p_cpep_0.4_normal.inst.cfg 1007 B

12345678910111213141516171819202122232425262728293031323334353637383940414243
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker2_plus
  5. [metadata]
  6. setting_version = 5
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_cpe_plus
  11. variant = 0.4 mm
  12. [values]
  13. adhesion_type = raft
  14. cool_fan_speed = 50
  15. cool_fan_speed_min = =cool_fan_speed * 25 / 50
  16. cool_min_layer_time = 3
  17. cool_min_speed = 8
  18. infill_overlap = 5
  19. infill_sparse_density = 30
  20. layer_0_z_overlap = 0.22
  21. layer_height = 0.15
  22. line_width = 0.38
  23. raft_airgap = 0.37
  24. raft_base_line_spacing = 1.6
  25. raft_base_line_width = 0.8
  26. raft_interface_line_spacing = 1
  27. raft_interface_line_width = 0.8
  28. raft_margin = 15
  29. raft_surface_line_width = 0.38
  30. speed_layer_0 = =math.ceil(speed_print * 15 / 35)
  31. speed_print = 35
  32. speed_topbottom = =math.ceil(speed_print * 20 / 35)
  33. speed_wall_0 = =math.ceil(speed_print * 20 / 35)
  34. speed_wall_x = =math.ceil(speed_print * 30 / 35)
  35. support_angle = 45
  36. support_enable = True
  37. support_infill_rate = 20
  38. support_pattern = lines
  39. support_z_distance = 0.26
  40. top_bottom_thickness = 1.5
  41. wall_thickness = 1.14