Cura/cura/PrintInformation.py

# Copyright (c) 2018 Ultimaker B.V.
# Cura is released under the terms of the LGPLv3 or higher.

import json
import math
import os
import unicodedata
import re  # To create abbreviations for printer names.
from typing import Dict

from PyQt5.QtCore import QObject, pyqtSignal, pyqtProperty, pyqtSlot

from UM.i18n import i18nCatalog
from UM.Logger import Logger
from UM.Qt.Duration import Duration
from UM.Scene.SceneNode import SceneNode
from UM.i18n import i18nCatalog
from UM.MimeTypeDatabase import MimeTypeDatabase

catalog = i18nCatalog("cura")


##  A class for processing and calculating minimum, current and maximum print time as well as managing the job name
#
#   This class contains all the logic relating to calculation and slicing for the
#   time/quality slider concept. It is a rather tricky combination of event handling
#   and state management. The logic behind this is as follows:
#
#   - A scene change or setting change event happens.
#        We track what the source was of the change, either a scene change, a setting change, an active machine change or something else.
#   - This triggers a new slice with the current settings - this is the "current settings pass".
#   - When the slice is done, we update the current print time and material amount.
#   - If the source of the slice was not a Setting change, we start the second slice pass, the "low quality settings pass". Otherwise we stop here.
#   - When that is done, we update the minimum print time and start the final slice pass, the "Extra Fine settings pass".
#   - When the Extra Fine pass is done, we update the maximum print time.
#
#   This class also mangles the current machine name and the filename of the first loaded mesh into a job name.
#   This job name is requested by the JobSpecs qml file.
class PrintInformation(QObject):
    class SlicePass:
        CurrentSettings = 1
        LowQualitySettings = 2
        HighQualitySettings = 3

    class SliceReason:
        SceneChanged = 1
        SettingChanged = 2
        ActiveMachineChanged = 3
        Other = 4

    def __init__(self, application, parent = None):
        super().__init__(parent)
        self._application = application

        self.initializeCuraMessagePrintTimeProperties()

        self._material_lengths = {}  # indexed by build plate number
        self._material_weights = {}
        self._material_costs = {}
        self._material_names = {}

        self._pre_sliced = False

        self._backend = self._application.getBackend()
        if self._backend:
            self._backend.printDurationMessage.connect(self._onPrintDurationMessage)
        self._application.getController().getScene().sceneChanged.connect(self._onSceneChanged)

        self._is_user_specified_job_name = False
        self._base_name = ""
        self._abbr_machine = ""
        self._job_name = ""
        self._project_name = ""
        self._active_build_plate = 0
        self._initVariablesWithBuildPlate(self._active_build_plate)

        self._multi_build_plate_model = self._application.getMultiBuildPlateModel()

        self._application.globalContainerStackChanged.connect(self._updateJobName)
        self._application.globalContainerStackChanged.connect(self.setToZeroPrintInformation)
        self._application.fileLoaded.connect(self.setBaseName)
        self._application.workspaceLoaded.connect(self.setProjectName)
        self._multi_build_plate_model.activeBuildPlateChanged.connect(self._onActiveBuildPlateChanged)

        self._application.getInstance().getPreferences().preferenceChanged.connect(self._onPreferencesChanged)

        self._application.getMachineManager().rootMaterialChanged.connect(self._onActiveMaterialsChanged)
        self._onActiveMaterialsChanged()

        self._material_amounts = []

    # Crate cura message translations and using translation keys initialize empty time Duration object for total time
    # and time for each feature
    def initializeCuraMessagePrintTimeProperties(self):
        self._current_print_time = {}  # Duration(None, self)

        self._print_time_message_translations = {
            "inset_0": catalog.i18nc("@tooltip", "Outer Wall"),
            "inset_x": catalog.i18nc("@tooltip", "Inner Walls"),
            "skin": catalog.i18nc("@tooltip", "Skin"),
            "infill": catalog.i18nc("@tooltip", "Infill"),
            "support_infill": catalog.i18nc("@tooltip", "Support Infill"),
            "support_interface": catalog.i18nc("@tooltip", "Support Interface"),
            "support": catalog.i18nc("@tooltip", "Support"),
            "skirt": catalog.i18nc("@tooltip", "Skirt"),
            "travel": catalog.i18nc("@tooltip", "Travel"),
            "retract": catalog.i18nc("@tooltip", "Retractions"),
            "none": catalog.i18nc("@tooltip", "Other")
        }

        self._print_time_message_values = {}

    def _initPrintTimeMessageValues(self, build_plate_number):
        # Full fill message values using keys from _print_time_message_translations
        self._print_time_message_values[build_plate_number] = {}
        for key in self._print_time_message_translations.keys():
            self._print_time_message_values[build_plate_number][key] = Duration(None, self)

    def _initVariablesWithBuildPlate(self, build_plate_number):
        if build_plate_number not in self._print_time_message_values:
            self._initPrintTimeMessageValues(build_plate_number)
        if self._active_build_plate not in self._material_lengths:
            self._material_lengths[self._active_build_plate] = []
        if self._active_build_plate not in self._material_weights:
            self._material_weights[self._active_build_plate] = []
        if self._active_build_plate not in self._material_costs:
            self._material_costs[self._active_build_plate] = []
        if self._active_build_plate not in self._material_names:
            self._material_names[self._active_build_plate] = []
        if self._active_build_plate not in self._current_print_time:
            self._current_print_time[self._active_build_plate] = Duration(None, self)

    currentPrintTimeChanged = pyqtSignal()

    preSlicedChanged = pyqtSignal()

    @pyqtProperty(bool, notify=preSlicedChanged)
    def preSliced(self):
        return self._pre_sliced

    def setPreSliced(self, pre_sliced):
        self._pre_sliced = pre_sliced
        self._updateJobName()
        self.preSlicedChanged.emit()

    @pyqtProperty(Duration, notify = currentPrintTimeChanged)
    def currentPrintTime(self):
        return self._current_print_time[self._active_build_plate]

    materialLengthsChanged = pyqtSignal()

    @pyqtProperty("QVariantList", notify = materialLengthsChanged)
    def materialLengths(self):
        return self._material_lengths[self._active_build_plate]

    materialWeightsChanged = pyqtSignal()

    @pyqtProperty("QVariantList", notify = materialWeightsChanged)
    def materialWeights(self):
        return self._material_weights[self._active_build_plate]

    materialCostsChanged = pyqtSignal()

    @pyqtProperty("QVariantList", notify = materialCostsChanged)
    def materialCosts(self):
        return self._material_costs[self._active_build_plate]

    materialNamesChanged = pyqtSignal()

    @pyqtProperty("QVariantList", notify = materialNamesChanged)
    def materialNames(self):
        return self._material_names[self._active_build_plate]

    def printTimes(self):
        return self._print_time_message_values[self._active_build_plate]

    def _onPrintDurationMessage(self, build_plate_number, print_time: Dict[str, int], material_amounts: list):
        self._updateTotalPrintTimePerFeature(build_plate_number, print_time)
        self.currentPrintTimeChanged.emit()

        self._material_amounts = material_amounts
        self._calculateInformation(build_plate_number)

    def _updateTotalPrintTimePerFeature(self, build_plate_number, print_time: Dict[str, int]):
        total_estimated_time = 0

        if build_plate_number not in self._print_time_message_values:
            self._initPrintTimeMessageValues(build_plate_number)

        for feature, time in print_time.items():
            if time != time:  # Check for NaN. Engine can sometimes give us weird values.
                self._print_time_message_values[build_plate_number].get(feature).setDuration(0)
                Logger.log("w", "Received NaN for print duration message")
                continue

            total_estimated_time += time
            self._print_time_message_values[build_plate_number].get(feature).setDuration(time)

        if build_plate_number not in self._current_print_time:
            self._current_print_time[build_plate_number] = Duration(None, self)
        self._current_print_time[build_plate_number].setDuration(total_estimated_time)

    def _calculateInformation(self, build_plate_number):
        global_stack = self._application.getGlobalContainerStack()
        if global_stack is None:
            return

        self._material_lengths[build_plate_number] = []
        self._material_weights[build_plate_number] = []
        self._material_costs[build_plate_number] = []
        self._material_names[build_plate_number] = []

        material_preference_values = json.loads(self._application.getInstance().getPreferences().getValue("cura/material_settings"))

        extruder_stacks = global_stack.extruders
        for position, extruder_stack in extruder_stacks.items():
            index = int(position)
            if index >= len(self._material_amounts):
                continue
            amount = self._material_amounts[index]
            ## Find the right extruder stack. As the list isn't sorted because it's a annoying generator, we do some
            #  list comprehension filtering to solve this for us.
            density = extruder_stack.getMetaDataEntry("properties", {}).get("density", 0)
            material = extruder_stack.findContainer({"type": "material"})
            radius = extruder_stack.getProperty("material_diameter", "value") / 2

            weight = float(amount) * float(density) / 1000
            cost = 0
            material_name = catalog.i18nc("@label unknown material", "Unknown")
            if material:
                material_guid = material.getMetaDataEntry("GUID")
                material_name = material.getName()
                if material_guid in material_preference_values:
                    material_values = material_preference_values[material_guid]

                    weight_per_spool = float(material_values["spool_weight"] if material_values and "spool_weight" in material_values else 0)
                    cost_per_spool = float(material_values["spool_cost"] if material_values and "spool_cost" in material_values else 0)

                    if weight_per_spool != 0:
                        cost = cost_per_spool * weight / weight_per_spool
                    else:
                        cost = 0

            # Material amount is sent as an amount of mm^3, so calculate length from that
            if radius != 0:
                length = round((amount / (math.pi * radius ** 2)) / 1000, 2)
            else:
                length = 0
            self._material_weights[build_plate_number].append(weight)
            self._material_lengths[build_plate_number].append(length)
            self._material_costs[build_plate_number].append(cost)
            self._material_names[build_plate_number].append(material_name)

        self.materialLengthsChanged.emit()
        self.materialWeightsChanged.emit()
        self.materialCostsChanged.emit()
        self.materialNamesChanged.emit()

    def _onPreferencesChanged(self, preference):
        if preference != "cura/material_settings":
            return

        for build_plate_number in range(self._multi_build_plate_model.maxBuildPlate + 1):
            self._calculateInformation(build_plate_number)

    def _onActiveBuildPlateChanged(self):
        new_active_build_plate = self._multi_build_plate_model.activeBuildPlate
        if new_active_build_plate != self._active_build_plate:
            self._active_build_plate = new_active_build_plate

            self._initVariablesWithBuildPlate(self._active_build_plate)

            self.materialLengthsChanged.emit()
            self.materialWeightsChanged.emit()
            self.materialCostsChanged.emit()
            self.materialNamesChanged.emit()
            self.currentPrintTimeChanged.emit()

    def _onActiveMaterialsChanged(self, *args, **kwargs):
        for build_plate_number in range(self._multi_build_plate_model.maxBuildPlate + 1):
            self._calculateInformation(build_plate_number)

    # Manual override of job name should also set the base name so that when the printer prefix is updated, it the
    # prefix can be added to the manually added name, not the old base name
    @pyqtSlot(str, bool)
    def setJobName(self, name, is_user_specified_job_name = False):
        self._is_user_specified_job_name = is_user_specified_job_name
        self._job_name = name
        self._base_name = name.replace(self._abbr_machine + "_", "")
        if name == "":
            self._is_user_specified_job_name = False
        self.jobNameChanged.emit()

    jobNameChanged = pyqtSignal()

    @pyqtProperty(str, notify = jobNameChanged)
    def jobName(self):
        return self._job_name

    def _updateJobName(self):
        if self._base_name == "":
            self._job_name = "unnamed"
            self._is_user_specified_job_name = False
            self.jobNameChanged.emit()
            return

        base_name = self._stripAccents(self._base_name)
        self._setAbbreviatedMachineName()

        # Only update the job name when it's not user-specified.
        if not self._is_user_specified_job_name:
            if self._pre_sliced:
                self._job_name = catalog.i18nc("@label", "Pre-sliced file {0}", base_name)
            elif self._application.getInstance().getPreferences().getValue("cura/jobname_prefix"):
                # Don't add abbreviation if it already has the exact same abbreviation.
                if base_name.startswith(self._abbr_machine + "_"):
                    self._job_name = base_name
                else:
                    self._job_name = self._abbr_machine + "_" + base_name
            else:
                self._job_name = base_name

        self.jobNameChanged.emit()

    @pyqtSlot(str)
    def setProjectName(self, name):
        self.setBaseName(name, is_project_file = True)

    baseNameChanged = pyqtSignal()

    def setBaseName(self, base_name: str, is_project_file: bool = False):
        self._is_user_specified_job_name = False

        # Ensure that we don't use entire path but only filename
        name = os.path.basename(base_name)

        # when a file is opened using the terminal; the filename comes from _onFileLoaded and still contains its
        # extension. This cuts the extension off if necessary.
        check_name = os.path.splitext(name)[0]
        filename_parts = os.path.basename(base_name).split(".")

        # If it's a gcode, also always update the job name
        is_gcode = False
        if len(filename_parts) > 1:
            # Only check the extension(s)
            is_gcode = "gcode" in filename_parts[1:]

        # if this is a profile file, always update the job name
        # name is "" when I first had some meshes and afterwards I deleted them so the naming should start again
        is_empty = check_name == ""
        if is_gcode or is_project_file or (is_empty or (self._base_name == "" and self._base_name != check_name)):
            # Only take the file name part, Note : file name might have 'dot' in name as well

            data = ""
            try:
                mime_type = MimeTypeDatabase.getMimeTypeForFile(name)
                data = mime_type.stripExtension(name)
            except:
                Logger.log("w", "Unsupported Mime Type Database file extension %s", name)

            if data is not None and check_name is not None:
                self._base_name = data
            else:
                self._base_name = ""

            self._updateJobName()

    @pyqtProperty(str, fset = setBaseName, notify = baseNameChanged)
    def baseName(self):
        return self._base_name

    ##  Created an acronymn-like abbreviated machine name from the currently active machine name
    #   Called each time the global stack is switched
    def _setAbbreviatedMachineName(self):
        global_container_stack = self._application.getGlobalContainerStack()
        if not global_container_stack:
            self._abbr_machine = ""
            return
        active_machine_type_name = global_container_stack.definition.getName()

        abbr_machine = ""
        for word in re.findall(r"[\w']+", active_machine_type_name):
            if word.lower() == "ultimaker":
                abbr_machine += "UM"
            elif word.isdigit():
                abbr_machine += word
            else:
                stripped_word = self._stripAccents(word.upper())
                # - use only the first character if the word is too long (> 3 characters)
                # - use the whole word if it's not too long (<= 3 characters)
                if len(stripped_word) > 3:
                    stripped_word = stripped_word[0]
                abbr_machine += stripped_word

        self._abbr_machine = abbr_machine

    ##  Utility method that strips accents from characters (eg: â -> a)
    def _stripAccents(self, str):
        return ''.join(char for char in unicodedata.normalize('NFD', str) if unicodedata.category(char) != 'Mn')

    @pyqtSlot(result = "QVariantMap")
    def getFeaturePrintTimes(self):
        result = {}
        if self._active_build_plate not in self._print_time_message_values:
            self._initPrintTimeMessageValues(self._active_build_plate)
        for feature, time in self._print_time_message_values[self._active_build_plate].items():
            if feature in self._print_time_message_translations:
                result[self._print_time_message_translations[feature]] = time
            else:
                result[feature] = time
        return result

    # Simulate message with zero time duration
    def setToZeroPrintInformation(self, build_plate = None):
        if build_plate is None:
            build_plate = self._active_build_plate

        # Construct the 0-time message
        temp_message = {}
        if build_plate not in self._print_time_message_values:
            self._print_time_message_values[build_plate] = {}
        for key in self._print_time_message_values[build_plate].keys():
            temp_message[key] = 0
        temp_material_amounts = [0]

        self._onPrintDurationMessage(build_plate, temp_message, temp_material_amounts)

    ##  Listen to scene changes to check if we need to reset the print information
    def _onSceneChanged(self, scene_node):
        # Ignore any changes that are not related to sliceable objects
        if not isinstance(scene_node, SceneNode)\
                or not scene_node.callDecoration("isSliceable")\
                or not scene_node.callDecoration("getBuildPlateNumber") == self._active_build_plate:
            return

        self.setToZeroPrintInformation(self._active_build_plate)