| 1234567891011121314151617181920212223242526272829303132333435363738 |
- {
- "version": 2,
- "name": "BQ Witbox",
- "inherits": "fdmprinter",
- "metadata":
- {
- "visible": true,
- "author": "BQ",
- "manufacturer": "BQ",
- "file_formats": "text/x-gcode",
- "platform": "bq_witbox_platform.3mf",
- "firmware_file": "MarlinWitbox.hex",
- "machine_extruder_trains": { "0": "bq_witbox_extruder_0" },
- "platform_offset": [
- 0,
- -145,
- -38
- ]
- },
- "overrides":
- {
- "layer_height": { "default_value": 0.2 },
- "layer_height_0": { "default_value": 0.2 },
- "machine_center_is_zero": { "default_value": false },
- "machine_depth": { "default_value": 210 },
- "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG90 ;set to absolute positioning\nG1 Z200 ;move the platform to the bottom\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --" },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_heated_bed": { "default_value": false },
- "machine_height": { "default_value": 200 },
- "machine_name": { "default_value": "BQ Witbox" },
- "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/s\n; -- end of START GCODE --" },
- "machine_width": { "default_value": 297 },
- "speed_print": { "default_value": 40 },
- "support_enable": { "default_value": true },
- "top_bottom_thickness": { "default_value": 1 },
- "wall_thickness": { "value": "1" }
- }
- }
|
