Cura/resources/definitions/ultimaker_sketch.def.json

{
    "version": 2,
    "name": "MakerBot Sketch",
    "inherits": "ultimaker",
    "metadata":
    {
        "visible": true,
        "author": "Ultimaker",
        "manufacturer": "Ultimaker B.V.",
        "file_formats": "application/x-makerbot-sketch",
        "platform": "ultimaker_sketch_platform.obj",
        "exclude_materials": [
            "dsm_",
            "Essentium_",
            "imade3d_",
            "chromatik_",
            "3D-Fuel_",
            "bestfilament_",
            "emotiontech_",
            "eryone_",
            "eSUN_",
            "Extrudr_",
            "fabtotum_",
            "fdplast_",
            "filo3d_",
            "ultimaker_rapidrinse_175",
            "goofoo_",
            "ideagen3D_",
            "imade3d_",
            "innofill_",
            "layer_one_",
            "leapfrog_",
            "polyflex_pla",
            "polymax_pla",
            "polyplus_pla",
            "polywood_pla",
            "redd_",
            "tizyx_",
            "verbatim_",
            "Vertex_",
            "volumic_",
            "xyzprinting_",
            "zyyx_pro_",
            "octofiber_",
            "fiberlogy_",
            "generic_",
            "ultimaker_asa",
            "ultimaker_abs",
            "ultimaker_nylon",
            "ultimaker_rapidrinse",
            "ultimaker_sr30",
            "ultimaker_petg",
            "ultimaker_pva",
            "ultimaker_metallic_pla"
        ],
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains": { "0": "ultimaker_sketch_extruder" },
        "preferred_quality_type": "draft",
        "preferred_variant_name": "0.4mm",
        "reference_machine_id": "sketch",
        "supports_network_connection": true,
        "supports_usb_connection": false,
        "variants_name": "Extruder",
        "weight": -1
    },
    "overrides":
    {
        "acceleration_enabled":
        {
            "enabled": false,
            "value": false
        },
        "adhesion_type": { "value": "'skirt'" },
        "brim_width": { "value": "3" },
        "cool_during_extruder_switch":
        {
            "enabled": false,
            "value": false
        },
        "cool_fan_full_at_height": { "value": "layer_height + layer_height_0" },
        "cool_fan_speed": { "value": 100 },
        "cool_fan_speed_0": { "value": 0 },
        "cool_min_layer_time": { "value": 8 },
        "extruder_prime_pos_abs": { "default_value": true },
        "fill_outline_gaps": { "value": false },
        "gantry_height": { "value": "60" },
        "infill_angles": { "value": "[45,45,45,45,45,135,135,135,135,135]" },
        "infill_before_walls": { "value": false },
        "infill_overlap": { "value": 0 },
        "infill_pattern": { "value": "'zigzag'" },
        "infill_sparse_density": { "value": 20 },
        "infill_wipe_dist": { "value": 0 },
        "initial_layer_line_width_factor": { "value": 125 },
        "inset_direction": { "value": "'inside_out'" },
        "jerk_enabled":
        {
            "enabled": false,
            "value": false
        },
        "layer_height_0": { "value": "layer_height * 1.25" },
        "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
        "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
        "machine_center_is_zero": { "default_value": true },
        "machine_depth": { "default_value": 150 },
        "machine_end_gcode": { "default_value": "M107; Disable Fan; \n; End of print; \n; End GCode\nM104 S0 T0; Set Toolhead Temp to 0\nM140 S0 T0; Set Platform Temp to 0\nG162 Z F1800; Move to max axes position\nG28 X Y; Home\nM652; Turn off back fan\nM132 X Y Z A B; Set Home Position\nG91; Use Relative Positioning\nM18; Disable Axes\n\n" },
        "machine_extruder_count": { "default_value": 1 },
        "machine_gcode_flavor": { "default_value": "Griffin" },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 150 },
        "machine_max_feedrate_x": { "default_value": 300 },
        "machine_max_feedrate_y": { "default_value": 300 },
        "machine_max_feedrate_z": { "default_value": 40 },
        "machine_min_cool_heat_time_window": { "value": "15" },
        "machine_name": { "default_value": "MakerBot Sketch" },
        "machine_nozzle_cool_down_speed": { "default_value": 0.8 },
        "machine_nozzle_heat_up_speed": { "default_value": 1.4 },
        "machine_start_gcode": { "default_value": "M140 S50 T0; Set Platform Temp\nM104 S220 T0; Set Extruder Temp\nG90; Use Absolute Positioning\nG28; Home\nM132 X Y Z A B; Set Current Position to Home\nG161 X Y F3300; Move to min axes positions\nM7 T0; Wait For Platform to Heat\nM6 T0; Wait For Extruders to Heat\nM651; Turn on back fan\nM907 X100 Y100 Z40 A80 B20; Set Stepper Currents\nM106; Enable Cooling Fan\n; Purge Line\nG92 E0; Reset Extruder Axis Position\nG1 X-26.18 Y-75.90 Z0.200 F420\nG1 X26.18 Y-75.90 E10\nG92 E0; Reset Extruder Axis Position\n; Start GCode\n" },
        "machine_width": { "default_value": 150 },
        "material_diameter": { "default_value": 1.75 },
        "material_flow": { "default_value": 100 },
        "min_bead_width":
        {
            "minimum_value": "line_width * 0.5",
            "minimum_value_warning": "line_width * 0.75",
            "value": "line_width"
        },
        "min_wall_line_width":
        {
            "minimum_value": "line_width * 0.5",
            "minimum_value_warning": "line_width * 0.75",
            "value": "line_width"
        },
        "multiple_mesh_overlap": { "value": "0" },
        "optimize_wall_printing_order": { "value": "True" },
        "prime_blob_enable":
        {
            "default_value": true,
            "enabled": true,
            "value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
        },
        "raft_margin": { "value": "5" },
        "retract_at_layer_change": { "value": true },
        "retraction_amount":
        {
            "maximum_value": 6,
            "maximum_value_warning": 5.75,
            "value": 5.5
        },
        "retraction_combing": { "value": "'no_outer_surfaces'" },
        "retraction_min_travel": { "value": "2 * line_width" },
        "retraction_prime_speed": { "value": "15" },
        "retraction_speed": { "value": "25" },
        "roofing_material_flow": { "value": 100 },
        "skin_material_flow": { "value": 95 },
        "skin_material_flow_layer_0": { "value": 100 },
        "skirt_brim_line_width": { "value": 1 },
        "skirt_brim_speed": { "value": 15 },
        "skirt_height": { "value": 3 },
        "speed_print": { "value": 50 },
        "speed_roofing": { "value": "0.8 * speed_print" },
        "speed_support": { "value": "0.7 * speed_print" },
        "speed_support_interface": { "value": "speed_topbottom" },
        "speed_topbottom": { "value": "speed_roofing" },
        "speed_travel": { "value": 80 },
        "speed_wall": { "value": "0.5 * speed_print" },
        "speed_wall_0": { "value": "1 * speed_wall" },
        "speed_wall_x": { "value": "1 * speed_wall" },
        "speed_z_hop": { "value": 10 },
        "support_angle": { "value": "45" },
        "support_structure": { "value": "'tree'" },
        "top_bottom_thickness": { "value": "4 * layer_height" },
        "travel_avoid_distance": { "value": "machine_nozzle_tip_outer_diameter / 2 * 1.5" },
        "travel_avoid_supports": { "value": true },
        "wall_0_inset": { "value": "0" },
        "wall_0_material_flow_layer_0": { "value": "1 * material_flow" },
        "wall_thickness": { "value": "2 * machine_nozzle_size" },
        "wall_x_material_flow": { "value": "0.95 * material_flow" },
        "wall_x_material_flow_layer_0": { "value": "1 * material_flow" },
        "xy_offset": { "value": 0 },
        "xy_offset_layer_0": { "value": 0 },
        "z_seam_corner": { "value": "'z_seam_corner_any'" },
        "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
    }
}