um3_aa0.4_PC_Fast_Print.inst.cfg 1.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445
  1. [general]
  2. definition = ultimaker3
  3. name = Normal
  4. version = 4
  5. [metadata]
  6. material = generic_pc
  7. quality_type = fast
  8. setting_version = 21
  9. type = quality
  10. variant = AA 0.4
  11. weight = -1
  12. [values]
  13. adhesion_type = raft
  14. brim_width = 20
  15. infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
  16. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  17. infill_wipe_dist = 0.1
  18. layer_height = 0.15
  19. machine_min_cool_heat_time_window = 15
  20. machine_nozzle_cool_down_speed = 0.85
  21. machine_nozzle_heat_up_speed = 1.5
  22. material_print_temperature = =default_material_print_temperature + 10
  23. multiple_mesh_overlap = 0
  24. ooze_shield_angle = 40
  25. prime_tower_enable = True
  26. prime_tower_wipe_enabled = True
  27. raft_airgap = 0.25
  28. retraction_hop = 2
  29. retraction_hop_only_when_collides = True
  30. retraction_min_travel = 0.8
  31. retraction_prime_speed = 15
  32. skin_overlap = 30
  33. speed_print = 50
  34. speed_topbottom = =math.ceil(speed_print * 25 / 50)
  35. speed_travel = 250
  36. speed_wall = =math.ceil(speed_print * 40 / 50)
  37. speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
  38. support_interface_density = 87.5
  39. switch_extruder_prime_speed = 15
  40. switch_extruder_retraction_amount = 20
  41. switch_extruder_retraction_speeds = 35
  42. wall_0_inset = 0