um3_aa0.4_TPU_Normal_Quality.inst.cfg 1.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 6
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_tpu
  11. variant = AA 0.4
  12. [values]
  13. acceleration_enabled = True
  14. acceleration_print = 4000
  15. brim_width = 8.75
  16. cool_fan_speed_max = 100
  17. cool_min_layer_time_fan_speed_max = 6
  18. cool_min_speed = 4
  19. gradual_infill_step_height = =5 * layer_height
  20. infill_line_width = =round(line_width * 0.38 / 0.38, 2)
  21. infill_overlap = 0
  22. infill_pattern = cross_3d
  23. infill_sparse_density = 10
  24. infill_wipe_dist = 0.1
  25. jerk_enabled = True
  26. jerk_print = 25
  27. line_width = =machine_nozzle_size * 0.95
  28. machine_min_cool_heat_time_window = 15
  29. machine_nozzle_cool_down_speed = 0.5
  30. machine_nozzle_heat_up_speed = 2.5
  31. material_final_print_temperature = =material_print_temperature
  32. material_flow = 106
  33. material_initial_print_temperature = =material_print_temperature
  34. material_print_temperature_layer_0 = =material_print_temperature + 17
  35. material_standby_temperature = 100
  36. multiple_mesh_overlap = 0
  37. prime_tower_wipe_enabled = True
  38. retraction_count_max = 12
  39. retraction_extra_prime_amount = 0.8
  40. retraction_extrusion_window = 1
  41. retraction_hop = 1.5
  42. retraction_hop_only_when_collides = True
  43. retraction_min_travel = =line_width * 2
  44. retraction_prime_speed = 15
  45. skin_overlap = 5
  46. speed_equalize_flow_enabled = True
  47. speed_layer_0 = =math.ceil(speed_print * 18 / 25)
  48. speed_print = 25
  49. speed_topbottom = =math.ceil(speed_print * 25 / 25)
  50. speed_travel = 300
  51. speed_wall = =math.ceil(speed_print * 25 / 25)
  52. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  53. support_angle = 50
  54. switch_extruder_prime_speed = 15
  55. switch_extruder_retraction_amount = 20
  56. switch_extruder_retraction_speeds = 35
  57. top_bottom_thickness = 0.7
  58. travel_avoid_distance = 1.5
  59. wall_0_inset = 0
  60. wall_line_width_x = =line_width
  61. wall_thickness = 0.76