um3_aa0.4_PP_Draft_Print.inst.cfg 1.9 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465
  1. [general]
  2. version = 4
  3. name = Fast
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 6
  7. type = quality
  8. quality_type = draft
  9. weight = -2
  10. material = generic_pp
  11. variant = AA 0.4
  12. [values]
  13. acceleration_enabled = True
  14. acceleration_print = 4000
  15. brim_width = 20
  16. cool_fan_speed_max = 100
  17. cool_min_layer_time = 7
  18. cool_min_layer_time_fan_speed_max = 7
  19. cool_min_speed = 2.5
  20. infill_line_width = =round(line_width * 0.38 / 0.38, 2)
  21. infill_overlap = 0
  22. infill_pattern = tetrahedral
  23. infill_wipe_dist = 0.1
  24. jerk_enabled = True
  25. jerk_print = 25
  26. layer_height = 0.2
  27. line_width = =machine_nozzle_size * 0.95
  28. machine_min_cool_heat_time_window = 15
  29. machine_nozzle_cool_down_speed = 0.85
  30. machine_nozzle_heat_up_speed = 1.5
  31. material_bed_temperature_layer_0 = =material_bed_temperature + 5
  32. material_final_print_temperature = =material_print_temperature - 10
  33. material_initial_print_temperature = =material_print_temperature - 5
  34. material_print_temperature = =default_material_print_temperature - 5
  35. material_print_temperature_layer_0 = =material_print_temperature + 5
  36. material_standby_temperature = 100
  37. multiple_mesh_overlap = 0
  38. prime_tower_enable = False
  39. prime_tower_size = 16
  40. prime_tower_wipe_enabled = True
  41. retraction_amount = 6.5
  42. retraction_count_max = 12
  43. retraction_extra_prime_amount = 0.8
  44. retraction_extrusion_window = 1
  45. retraction_hop = 2
  46. retraction_hop_only_when_collides = True
  47. retraction_min_travel = 0.8
  48. retraction_prime_speed = 18
  49. speed_equalize_flow_enabled = True
  50. speed_layer_0 = =math.ceil(speed_print * 15 / 25)
  51. speed_print = 25
  52. speed_topbottom = =math.ceil(speed_print * 25 / 25)
  53. speed_travel = 300
  54. speed_travel_layer_0 = 50
  55. speed_wall = =math.ceil(speed_print * 25 / 25)
  56. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  57. support_angle = 50
  58. switch_extruder_prime_speed = 15
  59. switch_extruder_retraction_amount = 20
  60. switch_extruder_retraction_speeds = 35
  61. wall_0_inset = 0
  62. wall_line_width_x = =line_width
  63. wall_thickness = =line_width * 3