Cura/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg

[general]
definition = ultimaker_s3
name = Fast
version = 4

[metadata]
material = generic_abs
quality_type = draft
setting_version = 22
type = quality
variant = AA 0.4
weight = -2

[values]
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 20
material_print_temperature = =default_material_print_temperature + 20
prime_tower_enable = False
raft_airgap = 0.15
skin_overlap = 20
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)