um2pc_cpep_0.6_normal.inst.cfg 1.0 KB

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker2_plus_connect
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = draft
  9. weight = 0
  10. material = generic_cpe_plus
  11. variant = 0.6 mm
  12. [values]
  13. cool_fan_speed = 45
  14. cool_fan_speed_min = =cool_fan_speed * 25 / 45
  15. cool_min_layer_time = 3
  16. cool_min_speed = 8
  17. infill_overlap = =0 if infill_sparse_density > 80 else 5
  18. infill_sparse_density = 20
  19. layer_0_z_overlap = 0.22
  20. raft_airgap = 0.37
  21. raft_base_line_spacing = 2.4
  22. raft_base_line_width = 1.2
  23. raft_interface_line_spacing = 1.4
  24. raft_interface_line_width = 1.2
  25. raft_margin = 15
  26. raft_surface_line_width = 0.57
  27. raft_surface_thickness = 0.2
  28. retraction_combing_max_distance = 50
  29. retraction_prime_speed = =retraction_speed
  30. speed_layer_0 = =math.ceil(speed_print * 30 / 35)
  31. speed_print = 35
  32. speed_topbottom = =math.ceil(speed_print * 20 / 35)
  33. speed_travel = 150
  34. speed_wall_0 = =math.ceil(speed_print * 30 / 35)
  35. speed_wall_x = =speed_print
  36. support_angle = 45
  37. support_enable = True
  38. support_z_distance = 0.22
  39. top_bottom_thickness = 0.75