Cura/resources/i18n/fdmprinter.def.json.pot

#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: Uranium json setting files\n"
"Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
"POT-Creation-Date: 2020-07-31 14:10+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: fdmprinter.def.json
msgctxt "machine_settings label"
msgid "Machine"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_settings description"
msgid "Machine specific settings"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_name label"
msgid "Machine Type"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_name description"
msgid "The name of your 3D printer model."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_show_variants label"
msgid "Show Machine Variants"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_show_variants description"
msgid ""
"Whether to show the different variants of this machine, which are described "
"in separate json files."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_start_gcode label"
msgid "Start G-code"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_start_gcode description"
msgid ""
"G-code commands to be executed at the very start - separated by \n"
"."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_end_gcode label"
msgid "End G-code"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_end_gcode description"
msgid ""
"G-code commands to be executed at the very end - separated by \n"
"."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_guid label"
msgid "Material GUID"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_guid description"
msgid "GUID of the material. This is set automatically."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_diameter label"
msgid "Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_diameter description"
msgid ""
"Adjusts the diameter of the filament used. Match this value with the "
"diameter of the used filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temp_wait label"
msgid "Wait for Build Plate Heatup"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temp_wait description"
msgid ""
"Whether to insert a command to wait until the build plate temperature is "
"reached at the start."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temp_wait label"
msgid "Wait for Nozzle Heatup"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temp_wait description"
msgid "Whether to wait until the nozzle temperature is reached at the start."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temp_prepend label"
msgid "Include Material Temperatures"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temp_prepend description"
msgid ""
"Whether to include nozzle temperature commands at the start of the gcode. "
"When the start_gcode already contains nozzle temperature commands Cura "
"frontend will automatically disable this setting."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temp_prepend label"
msgid "Include Build Plate Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temp_prepend description"
msgid ""
"Whether to include build plate temperature commands at the start of the "
"gcode. When the start_gcode already contains build plate temperature "
"commands Cura frontend will automatically disable this setting."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_width label"
msgid "Machine Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_width description"
msgid "The width (X-direction) of the printable area."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_depth label"
msgid "Machine Depth"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_depth description"
msgid "The depth (Y-direction) of the printable area."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_shape label"
msgid "Build Plate Shape"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_shape description"
msgid ""
"The shape of the build plate without taking unprintable areas into account."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_shape option rectangular"
msgid "Rectangular"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_shape option elliptic"
msgid "Elliptic"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_buildplate_type label"
msgid "Build Plate Material"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_buildplate_type description"
msgid "The material of the build plate installed on the printer."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_buildplate_type option glass"
msgid "Glass"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_buildplate_type option aluminum"
msgid "Aluminum"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_height label"
msgid "Machine Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_height description"
msgid "The height (Z-direction) of the printable area."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heated_bed label"
msgid "Has Heated Build Plate"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heated_bed description"
msgid "Whether the machine has a heated build plate present."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heated_build_volume label"
msgid "Has Build Volume Temperature Stabilization"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heated_build_volume description"
msgid "Whether the machine is able to stabilize the build volume temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_always_write_active_tool label"
msgid "Always Write Active Tool"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_always_write_active_tool description"
msgid ""
"Write active tool after sending temp commands to inactive tool. Required for "
"Dual Extruder printing with Smoothie or other firmware with modal tool "
"commands."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_center_is_zero label"
msgid "Is Center Origin"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_center_is_zero description"
msgid ""
"Whether the X/Y coordinates of the zero position of the printer is at the "
"center of the printable area."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruder_count label"
msgid "Number of Extruders"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruder_count description"
msgid ""
"Number of extruder trains. An extruder train is the combination of a feeder, "
"bowden tube, and nozzle."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruders_enabled_count label"
msgid "Number of Extruders That Are Enabled"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruders_enabled_count description"
msgid ""
"Number of extruder trains that are enabled; automatically set in software"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_tip_outer_diameter label"
msgid "Outer Nozzle Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_tip_outer_diameter description"
msgid "The outer diameter of the tip of the nozzle."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_head_distance label"
msgid "Nozzle Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_head_distance description"
msgid ""
"The height difference between the tip of the nozzle and the lowest part of "
"the print head."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_expansion_angle label"
msgid "Nozzle Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_expansion_angle description"
msgid ""
"The angle between the horizontal plane and the conical part right above the "
"tip of the nozzle."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heat_zone_length label"
msgid "Heat Zone Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_heat_zone_length description"
msgid ""
"The distance from the tip of the nozzle in which heat from the nozzle is "
"transferred to the filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_temp_enabled label"
msgid "Enable Nozzle Temperature Control"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_temp_enabled description"
msgid ""
"Whether to control temperature from Cura. Turn this off to control nozzle "
"temperature from outside of Cura."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_heat_up_speed label"
msgid "Heat Up Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_heat_up_speed description"
msgid ""
"The speed (°C/s) by which the nozzle heats up averaged over the window of "
"normal printing temperatures and the standby temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_cool_down_speed label"
msgid "Cool Down Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_cool_down_speed description"
msgid ""
"The speed (°C/s) by which the nozzle cools down averaged over the window of "
"normal printing temperatures and the standby temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_min_cool_heat_time_window label"
msgid "Minimal Time Standby Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_min_cool_heat_time_window description"
msgid ""
"The minimal time an extruder has to be inactive before the nozzle is cooled. "
"Only when an extruder is not used for longer than this time will it be "
"allowed to cool down to the standby temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor label"
msgid "G-code Flavor"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor description"
msgid "The type of g-code to be generated."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option RepRap (Marlin/Sprinter)"
msgid "Marlin"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option RepRap (Volumetric)"
msgid "Marlin (Volumetric)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option RepRap (RepRap)"
msgid "RepRap"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option UltiGCode"
msgid "Ultimaker 2"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option Griffin"
msgid "Griffin"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option Makerbot"
msgid "Makerbot"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option BFB"
msgid "Bits from Bytes"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option MACH3"
msgid "Mach3"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_gcode_flavor option Repetier"
msgid "Repetier"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_firmware_retract label"
msgid "Firmware Retraction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_firmware_retract description"
msgid ""
"Whether to use firmware retract commands (G10/G11) instead of using the E "
"property in G1 commands to retract the material."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruders_share_heater label"
msgid "Extruders Share Heater"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_extruders_share_heater description"
msgid ""
"Whether the extruders share a single heater rather than each extruder having "
"its own heater."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_disallowed_areas label"
msgid "Disallowed Areas"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_disallowed_areas description"
msgid "A list of polygons with areas the print head is not allowed to enter."
msgstr ""

#: fdmprinter.def.json
msgctxt "nozzle_disallowed_areas label"
msgid "Nozzle Disallowed Areas"
msgstr ""

#: fdmprinter.def.json
msgctxt "nozzle_disallowed_areas description"
msgid "A list of polygons with areas the nozzle is not allowed to enter."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_head_with_fans_polygon label"
msgid "Machine Head & Fan Polygon"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_head_with_fans_polygon description"
msgid "A 2D silhouette of the print head (fan caps included)."
msgstr ""

#: fdmprinter.def.json
msgctxt "gantry_height label"
msgid "Gantry Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "gantry_height description"
msgid ""
"The height difference between the tip of the nozzle and the gantry system (X "
"and Y axes)."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_id label"
msgid "Nozzle ID"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_id description"
msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_size label"
msgid "Nozzle Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_nozzle_size description"
msgid ""
"The inner diameter of the nozzle. Change this setting when using a non-"
"standard nozzle size."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_use_extruder_offset_to_offset_coords label"
msgid "Offset with Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_use_extruder_offset_to_offset_coords description"
msgid "Apply the extruder offset to the coordinate system."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_z label"
msgid "Extruder Prime Z Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_z description"
msgid ""
"The Z coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_abs label"
msgid "Absolute Extruder Prime Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_abs description"
msgid ""
"Make the extruder prime position absolute rather than relative to the last-"
"known location of the head."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_x label"
msgid "Maximum Speed X"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_x description"
msgid "The maximum speed for the motor of the X-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_y label"
msgid "Maximum Speed Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_y description"
msgid "The maximum speed for the motor of the Y-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_z label"
msgid "Maximum Speed Z"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_z description"
msgid "The maximum speed for the motor of the Z-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_e label"
msgid "Maximum Feedrate"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_feedrate_e description"
msgid "The maximum speed of the filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_x label"
msgid "Maximum Acceleration X"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_x description"
msgid "Maximum acceleration for the motor of the X-direction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_y label"
msgid "Maximum Acceleration Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_y description"
msgid "Maximum acceleration for the motor of the Y-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_z label"
msgid "Maximum Acceleration Z"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_z description"
msgid "Maximum acceleration for the motor of the Z-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_e label"
msgid "Maximum Filament Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_acceleration_e description"
msgid "Maximum acceleration for the motor of the filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_acceleration label"
msgid "Default Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_acceleration description"
msgid "The default acceleration of print head movement."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_xy label"
msgid "Default X-Y Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_xy description"
msgid "Default jerk for movement in the horizontal plane."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_z label"
msgid "Default Z Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_z description"
msgid "Default jerk for the motor of the Z-direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_e label"
msgid "Default Filament Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_max_jerk_e description"
msgid "Default jerk for the motor of the filament."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_x label"
msgid "Steps per Millimeter (X)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_x description"
msgid ""
"How many steps of the stepper motor will result in one millimeter of "
"movement in the X direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_y label"
msgid "Steps per Millimeter (Y)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_y description"
msgid ""
"How many steps of the stepper motor will result in one millimeter of "
"movement in the Y direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_z label"
msgid "Steps per Millimeter (Z)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_z description"
msgid ""
"How many steps of the stepper motor will result in one millimeter of "
"movement in the Z direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_e label"
msgid "Steps per Millimeter (E)"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_steps_per_mm_e description"
msgid ""
"How many steps of the stepper motors will result in one millimeter of "
"extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_x label"
msgid "X Endstop in Positive Direction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_x description"
msgid ""
"Whether the endstop of the X axis is in the positive direction (high X "
"coordinate) or negative (low X coordinate)."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_y label"
msgid "Y Endstop in Positive Direction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_y description"
msgid ""
"Whether the endstop of the Y axis is in the positive direction (high Y "
"coordinate) or negative (low Y coordinate)."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_z label"
msgid "Z Endstop in Positive Direction"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_endstop_positive_direction_z description"
msgid ""
"Whether the endstop of the Z axis is in the positive direction (high Z "
"coordinate) or negative (low Z coordinate)."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_minimum_feedrate label"
msgid "Minimum Feedrate"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_minimum_feedrate description"
msgid "The minimal movement speed of the print head."
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_feeder_wheel_diameter label"
msgid "Feeder Wheel Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "machine_feeder_wheel_diameter description"
msgid "The diameter of the wheel that drives the material in the feeder."
msgstr ""

#: fdmprinter.def.json
msgctxt "resolution label"
msgid "Quality"
msgstr ""

#: fdmprinter.def.json
msgctxt "resolution description"
msgid ""
"All settings that influence the resolution of the print. These settings have "
"a large impact on the quality (and print time)"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_height label"
msgid "Layer Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_height description"
msgid ""
"The height of each layer in mm. Higher values produce faster prints in lower "
"resolution, lower values produce slower prints in higher resolution."
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_height_0 label"
msgid "Initial Layer Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_height_0 description"
msgid ""
"The height of the initial layer in mm. A thicker initial layer makes "
"adhesion to the build plate easier."
msgstr ""

#: fdmprinter.def.json
msgctxt "line_width label"
msgid "Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "line_width description"
msgid ""
"Width of a single line. Generally, the width of each line should correspond "
"to the width of the nozzle. However, slightly reducing this value could "
"produce better prints."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width label"
msgid "Wall Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width description"
msgid "Width of a single wall line."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width_0 label"
msgid "Outer Wall Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width_0 description"
msgid ""
"Width of the outermost wall line. By lowering this value, higher levels of "
"detail can be printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width_x label"
msgid "Inner Wall(s) Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_width_x description"
msgid ""
"Width of a single wall line for all wall lines except the outermost one."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_line_width label"
msgid "Top/Bottom Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_line_width description"
msgid "Width of a single top/bottom line."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_line_width label"
msgid "Infill Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_line_width description"
msgid "Width of a single infill line."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_line_width label"
msgid "Skirt/Brim Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_line_width description"
msgid "Width of a single skirt or brim line."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_line_width label"
msgid "Support Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_line_width description"
msgid "Width of a single support structure line."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_line_width label"
msgid "Support Interface Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_line_width description"
msgid "Width of a single line of support roof or floor."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_line_width label"
msgid "Support Roof Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_line_width description"
msgid "Width of a single support roof line."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_line_width label"
msgid "Support Floor Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_line_width description"
msgid "Width of a single support floor line."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_line_width label"
msgid "Prime Tower Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_line_width description"
msgid "Width of a single prime tower line."
msgstr ""

#: fdmprinter.def.json
msgctxt "initial_layer_line_width_factor label"
msgid "Initial Layer Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "initial_layer_line_width_factor description"
msgid ""
"Multiplier of the line width on the first layer. Increasing this could "
"improve bed adhesion."
msgstr ""

#: fdmprinter.def.json
msgctxt "shell label"
msgid "Shell"
msgstr ""

#: fdmprinter.def.json
msgctxt "shell description"
msgid "Shell"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_extruder_nr label"
msgid "Wall Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_extruder_nr description"
msgid ""
"The extruder train used for printing the walls. This is used in multi-"
"extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_extruder_nr label"
msgid "Outer Wall Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_extruder_nr description"
msgid ""
"The extruder train used for printing the outer wall. This is used in multi-"
"extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_extruder_nr label"
msgid "Inner Wall Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_extruder_nr description"
msgid ""
"The extruder train used for printing the inner walls. This is used in multi-"
"extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_thickness label"
msgid "Wall Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_thickness description"
msgid ""
"The thickness of the walls in the horizontal direction. This value divided "
"by the wall line width defines the number of walls."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_count label"
msgid "Wall Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_line_count description"
msgid ""
"The number of walls. When calculated by the wall thickness, this value is "
"rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_wipe_dist label"
msgid "Outer Wall Wipe Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_wipe_dist description"
msgid ""
"Distance of a travel move inserted after the outer wall, to hide the Z seam "
"better."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_extruder_nr label"
msgid "Top Surface Skin Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_extruder_nr description"
msgid ""
"The extruder train used for printing the top most skin. This is used in "
"multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_layer_count label"
msgid "Top Surface Skin Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_layer_count description"
msgid ""
"The number of top most skin layers. Usually only one top most layer is "
"sufficient to generate higher quality top surfaces."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_extruder_nr label"
msgid "Top/Bottom Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_extruder_nr description"
msgid ""
"The extruder train used for printing the top and bottom skin. This is used "
"in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_thickness label"
msgid "Top/Bottom Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_thickness description"
msgid ""
"The thickness of the top/bottom layers in the print. This value divided by "
"the layer height defines the number of top/bottom layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_thickness label"
msgid "Top Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_thickness description"
msgid ""
"The thickness of the top layers in the print. This value divided by the "
"layer height defines the number of top layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_layers label"
msgid "Top Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_layers description"
msgid ""
"The number of top layers. When calculated by the top thickness, this value "
"is rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_thickness label"
msgid "Bottom Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_thickness description"
msgid ""
"The thickness of the bottom layers in the print. This value divided by the "
"layer height defines the number of bottom layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_layers label"
msgid "Bottom Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_layers description"
msgid ""
"The number of bottom layers. When calculated by the bottom thickness, this "
"value is rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "initial_bottom_layers label"
msgid "Initial Bottom Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "initial_bottom_layers description"
msgid ""
"The number of initial bottom layers, from the build-plate upwards. When "
"calculated by the bottom thickness, this value is rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern label"
msgid "Top/Bottom Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern description"
msgid "The pattern of the top/bottom layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 label"
msgid "Bottom Pattern Initial Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 description"
msgid "The pattern on the bottom of the print on the first layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_bottom_pattern_0 option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "connect_skin_polygons label"
msgid "Connect Top/Bottom Polygons"
msgstr ""

#: fdmprinter.def.json
msgctxt "connect_skin_polygons description"
msgid ""
"Connect top/bottom skin paths where they run next to each other. For the "
"concentric pattern enabling this setting greatly reduces the travel time, "
"but because the connections can happen midway over infill this feature can "
"reduce the top surface quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_angles label"
msgid "Top/Bottom Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_angles description"
msgid ""
"A list of integer line directions to use when the top/bottom layers use the "
"lines or zig zag pattern. Elements from the list are used sequentially as "
"the layers progress and when the end of the list is reached, it starts at "
"the beginning again. The list items are separated by commas and the whole "
"list is contained in square brackets. Default is an empty list which means "
"use the traditional default angles (45 and 135 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_inset label"
msgid "Outer Wall Inset"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_inset description"
msgid ""
"Inset applied to the path of the outer wall. If the outer wall is smaller "
"than the nozzle, and printed after the inner walls, use this offset to get "
"the hole in the nozzle to overlap with the inner walls instead of the "
"outside of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "optimize_wall_printing_order label"
msgid "Optimize Wall Printing Order"
msgstr ""

#: fdmprinter.def.json
msgctxt "optimize_wall_printing_order description"
msgid ""
"Optimize the order in which walls are printed so as to reduce the number of "
"retractions and the distance travelled. Most parts will benefit from this "
"being enabled but some may actually take longer so please compare the print "
"time estimates with and without optimization. First layer is not optimized "
"when choosing brim as build plate adhesion type."
msgstr ""

#: fdmprinter.def.json
msgctxt "outer_inset_first label"
msgid "Outer Before Inner Walls"
msgstr ""

#: fdmprinter.def.json
msgctxt "outer_inset_first description"
msgid ""
"Prints walls in order of outside to inside when enabled. This can help "
"improve dimensional accuracy in X and Y when using a high viscosity plastic "
"like ABS; however it can decrease outer surface print quality, especially on "
"overhangs."
msgstr ""

#: fdmprinter.def.json
msgctxt "alternate_extra_perimeter label"
msgid "Alternate Extra Wall"
msgstr ""

#: fdmprinter.def.json
msgctxt "alternate_extra_perimeter description"
msgid ""
"Prints an extra wall at every other layer. This way infill gets caught "
"between these extra walls, resulting in stronger prints."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_compensate_overlapping_walls_enabled label"
msgid "Compensate Wall Overlaps"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_compensate_overlapping_walls_enabled description"
msgid ""
"Compensate the flow for parts of a wall being printed where there is already "
"a wall in place."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_compensate_overlapping_walls_0_enabled label"
msgid "Compensate Outer Wall Overlaps"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_compensate_overlapping_walls_0_enabled description"
msgid ""
"Compensate the flow for parts of an outer wall being printed where there is "
"already a wall in place."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_compensate_overlapping_walls_x_enabled label"
msgid "Compensate Inner Wall Overlaps"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_compensate_overlapping_walls_x_enabled description"
msgid ""
"Compensate the flow for parts of an inner wall being printed where there is "
"already a wall in place."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_min_flow label"
msgid "Minimum Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_min_flow description"
msgid ""
"Minimum allowed percentage flow for a wall line. The wall overlap "
"compensation reduces a wall's flow when it lies close to an existing wall. "
"Walls whose flow is less than this value will be replaced with a travel "
"move. When using this setting, you must enable the wall overlap compensation "
"and print the outer wall before inner walls."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_min_flow_retract label"
msgid "Prefer Retract"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_min_flow_retract description"
msgid ""
"If enabled, retraction is used rather than combing for travel moves that "
"replace walls whose flow is below the minimum flow threshold."
msgstr ""

#: fdmprinter.def.json
msgctxt "fill_perimeter_gaps label"
msgid "Fill Gaps Between Walls"
msgstr ""

#: fdmprinter.def.json
msgctxt "fill_perimeter_gaps description"
msgid "Fills the gaps between walls where no walls fit."
msgstr ""

#: fdmprinter.def.json
msgctxt "fill_perimeter_gaps option nowhere"
msgid "Nowhere"
msgstr ""

#: fdmprinter.def.json
msgctxt "fill_perimeter_gaps option everywhere"
msgid "Everywhere"
msgstr ""

#: fdmprinter.def.json
msgctxt "filter_out_tiny_gaps label"
msgid "Filter Out Tiny Gaps"
msgstr ""

#: fdmprinter.def.json
msgctxt "filter_out_tiny_gaps description"
msgid "Filter out tiny gaps to reduce blobs on outside of model."
msgstr ""

#: fdmprinter.def.json
msgctxt "fill_outline_gaps label"
msgid "Print Thin Walls"
msgstr ""

#: fdmprinter.def.json
msgctxt "fill_outline_gaps description"
msgid ""
"Print pieces of the model which are horizontally thinner than the nozzle "
"size."
msgstr ""

#: fdmprinter.def.json
msgctxt "xy_offset label"
msgid "Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "xy_offset description"
msgid ""
"Amount of offset applied to all polygons in each layer. Positive values can "
"compensate for too big holes; negative values can compensate for too small "
"holes."
msgstr ""

#: fdmprinter.def.json
msgctxt "xy_offset_layer_0 label"
msgid "Initial Layer Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "xy_offset_layer_0 description"
msgid ""
"Amount of offset applied to all polygons in the first layer. A negative "
"value can compensate for squishing of the first layer known as \"elephant's "
"foot\"."
msgstr ""

#: fdmprinter.def.json
msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "hole_xy_offset description"
msgid ""
"Amount of offset applied to all holes in each layer. Positive values "
"increase the size of the holes, negative values reduce the size of the holes."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type label"
msgid "Z Seam Alignment"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type description"
msgid ""
"Starting point of each path in a layer. When paths in consecutive layers "
"start at the same point a vertical seam may show on the print. When aligning "
"these near a user specified location, the seam is easiest to remove. When "
"placed randomly the inaccuracies at the paths' start will be less "
"noticeable. When taking the shortest path the print will be quicker."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type option back"
msgid "User Specified"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type option shortest"
msgid "Shortest"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type option random"
msgid "Random"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_type option sharpest_corner"
msgid "Sharpest Corner"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position label"
msgid "Z Seam Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position description"
msgid "The position near where to start printing each part in a layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option backleft"
msgid "Back Left"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option back"
msgid "Back"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option backright"
msgid "Back Right"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option right"
msgid "Right"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option frontright"
msgid "Front Right"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option front"
msgid "Front"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option frontleft"
msgid "Front Left"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_position option left"
msgid "Left"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_x label"
msgid "Z Seam X"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_x description"
msgid ""
"The X coordinate of the position near where to start printing each part in a "
"layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_y label"
msgid "Z Seam Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_y description"
msgid ""
"The Y coordinate of the position near where to start printing each part in a "
"layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner label"
msgid "Seam Corner Preference"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner description"
msgid ""
"Control whether corners on the model outline influence the position of the "
"seam. None means that corners have no influence on the seam position. Hide "
"Seam makes the seam more likely to occur on an inside corner. Expose Seam "
"makes the seam more likely to occur on an outside corner. Hide or Expose "
"Seam makes the seam more likely to occur at an inside or outside corner. "
"Smart Hiding allows both inside and outside corners, but chooses inside "
"corners more frequently, if appropriate."
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_none"
msgid "None"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_inner"
msgid "Hide Seam"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_outer"
msgid "Expose Seam"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_any"
msgid "Hide or Expose Seam"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_corner option z_seam_corner_weighted"
msgid "Smart Hiding"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_relative label"
msgid "Z Seam Relative"
msgstr ""

#: fdmprinter.def.json
msgctxt "z_seam_relative description"
msgid ""
"When enabled, the z seam coordinates are relative to each part's centre. "
"When disabled, the coordinates define an absolute position on the build "
"plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_no_small_gaps_heuristic label"
msgid "No Skin in Z Gaps"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_no_small_gaps_heuristic description"
msgid ""
"When the model has small vertical gaps of only a few layers, there should "
"normally be skin around those layers in the narrow space. Enable this "
"setting to not generate skin if the vertical gap is very small. This "
"improves printing time and slicing time, but technically leaves infill "
"exposed to the air."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_outline_count label"
msgid "Extra Skin Wall Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_outline_count description"
msgid ""
"Replaces the outermost part of the top/bottom pattern with a number of "
"concentric lines. Using one or two lines improves roofs that start on infill "
"material."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_enabled label"
msgid "Enable Ironing"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_enabled description"
msgid ""
"Go over the top surface one additional time, but this time extruding very "
"little material. This is meant to melt the plastic on top further, creating "
"a smoother surface. The pressure in the nozzle chamber is kept high so that "
"the creases in the surface are filled with material."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_only_highest_layer label"
msgid "Iron Only Highest Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_only_highest_layer description"
msgid ""
"Only perform ironing on the very last layer of the mesh. This saves time if "
"the lower layers don't need a smooth surface finish."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_pattern label"
msgid "Ironing Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_pattern description"
msgid "The pattern to use for ironing top surfaces."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_line_spacing label"
msgid "Ironing Line Spacing"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_line_spacing description"
msgid "The distance between the lines of ironing."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_flow label"
msgid "Ironing Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_flow description"
msgid ""
"The amount of material, relative to a normal skin line, to extrude during "
"ironing. Keeping the nozzle filled helps filling some of the crevices of the "
"top surface, but too much results in overextrusion and blips on the side of "
"the surface."
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_inset label"
msgid "Ironing Inset"
msgstr ""

#: fdmprinter.def.json
msgctxt "ironing_inset description"
msgid ""
"A distance to keep from the edges of the model. Ironing all the way to the "
"edge of the mesh may result in a jagged edge on your print."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_ironing label"
msgid "Ironing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_ironing description"
msgid "The speed at which to pass over the top surface."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_ironing label"
msgid "Ironing Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_ironing description"
msgid "The acceleration with which ironing is performed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_ironing label"
msgid "Ironing Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_ironing description"
msgid "The maximum instantaneous velocity change while performing ironing."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_overlap label"
msgid "Skin Overlap Percentage"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_overlap description"
msgid ""
"Adjust the amount of overlap between the walls and (the endpoints of) the "
"skin-centerlines, as a percentage of the line widths of the skin lines and "
"the innermost wall. A slight overlap allows the walls to connect firmly to "
"the skin. Note that, given an equal skin and wall line-width, any percentage "
"over 50% may already cause any skin to go past the wall, because at that "
"point the position of the nozzle of the skin-extruder may already reach past "
"the middle of the wall."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_overlap_mm label"
msgid "Skin Overlap"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_overlap_mm description"
msgid ""
"Adjust the amount of overlap between the walls and (the endpoints of) the "
"skin-centerlines. A slight overlap allows the walls to connect firmly to the "
"skin. Note that, given an equal skin and wall line-width, any value over "
"half the width of the wall may already cause any skin to go past the wall, "
"because at that point the position of the nozzle of the skin-extruder may "
"already reach past the middle of the wall."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill label"
msgid "Infill"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill description"
msgid "Infill"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_extruder_nr label"
msgid "Infill Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_extruder_nr description"
msgid ""
"The extruder train used for printing infill. This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_sparse_density label"
msgid "Infill Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_sparse_density description"
msgid "Adjusts the density of infill of the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_line_distance label"
msgid "Infill Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_line_distance description"
msgid ""
"Distance between the printed infill lines. This setting is calculated by the "
"infill density and the infill line width."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern label"
msgid "Infill Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern description"
msgid ""
"The pattern of the infill material of the print. The line and zig zag infill "
"swap direction on alternate layers, reducing material cost. The grid, "
"triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric "
"patterns are fully printed every layer. Gyroid, cubic, quarter cubic and "
"octet infill change with every layer to provide a more equal distribution of "
"strength over each direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option trihexagon"
msgid "Tri-Hexagon"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option cubic"
msgid "Cubic"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option cubicsubdiv"
msgid "Cubic Subdivision"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option tetrahedral"
msgid "Octet"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option quarter_cubic"
msgid "Quarter Cubic"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option cross"
msgid "Cross"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option cross_3d"
msgid "Cross 3D"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_pattern option gyroid"
msgid "Gyroid"
msgstr ""

#: fdmprinter.def.json
msgctxt "zig_zaggify_infill label"
msgid "Connect Infill Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "zig_zaggify_infill description"
msgid ""
"Connect the ends where the infill pattern meets the inner wall using a line "
"which follows the shape of the inner wall. Enabling this setting can make "
"the infill adhere to the walls better and reduce the effects of infill on "
"the quality of vertical surfaces. Disabling this setting reduces the amount "
"of material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "connect_infill_polygons label"
msgid "Connect Infill Polygons"
msgstr ""

#: fdmprinter.def.json
msgctxt "connect_infill_polygons description"
msgid ""
"Connect infill paths where they run next to each other. For infill patterns "
"which consist of several closed polygons, enabling this setting greatly "
"reduces the travel time."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_angles label"
msgid "Infill Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_angles description"
msgid ""
"A list of integer line directions to use. Elements from the list are used "
"sequentially as the layers progress and when the end of the list is reached, "
"it starts at the beginning again. The list items are separated by commas and "
"the whole list is contained in square brackets. Default is an empty list "
"which means use the traditional default angles (45 and 135 degrees for the "
"lines and zig zag patterns and 45 degrees for all other patterns)."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_offset_x label"
msgid "Infill X Offset"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_offset_x description"
msgid "The infill pattern is moved this distance along the X axis."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_offset_y label"
msgid "Infill Y Offset"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_offset_y description"
msgid "The infill pattern is moved this distance along the Y axis."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_randomize_start_location label"
msgid "Randomize Infill Start"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_randomize_start_location description"
msgid ""
"Randomize which infill line is printed first. This prevents one segment "
"becoming the strongest, but it does so at the cost of an additional travel "
"move."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_multiplier label"
msgid "Infill Line Multiplier"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_multiplier description"
msgid ""
"Convert each infill line to this many lines. The extra lines do not cross "
"over each other, but avoid each other. This makes the infill stiffer, but "
"increases print time and material usage."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_wall_line_count label"
msgid "Extra Infill Wall Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_wall_line_count description"
msgid ""
"Add extra walls around the infill area. Such walls can make top/bottom skin "
"lines sag down less which means you need less top/bottom skin layers for the "
"same quality at the cost of some extra material.\n"
"This feature can combine with the Connect Infill Polygons to connect all the "
"infill into a single extrusion path without the need for travels or "
"retractions if configured right."
msgstr ""

#: fdmprinter.def.json
msgctxt "sub_div_rad_add label"
msgid "Cubic Subdivision Shell"
msgstr ""

#: fdmprinter.def.json
msgctxt "sub_div_rad_add description"
msgid ""
"An addition to the radius from the center of each cube to check for the "
"boundary of the model, as to decide whether this cube should be subdivided. "
"Larger values lead to a thicker shell of small cubes near the boundary of "
"the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_overlap label"
msgid "Infill Overlap Percentage"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_overlap description"
msgid ""
"The amount of overlap between the infill and the walls as a percentage of "
"the infill line width. A slight overlap allows the walls to connect firmly "
"to the infill."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_overlap_mm label"
msgid "Infill Overlap"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_overlap_mm description"
msgid ""
"The amount of overlap between the infill and the walls. A slight overlap "
"allows the walls to connect firmly to the infill."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_wipe_dist label"
msgid "Infill Wipe Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_wipe_dist description"
msgid ""
"Distance of a travel move inserted after every infill line, to make the "
"infill stick to the walls better. This option is similar to infill overlap, "
"but without extrusion and only on one end of the infill line."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_sparse_thickness label"
msgid "Infill Layer Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_sparse_thickness description"
msgid ""
"The thickness per layer of infill material. This value should always be a "
"multiple of the layer height and is otherwise rounded."
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_infill_steps label"
msgid "Gradual Infill Steps"
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_infill_steps description"
msgid ""
"Number of times to reduce the infill density by half when getting further "
"below top surfaces. Areas which are closer to top surfaces get a higher "
"density, up to the Infill Density."
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_infill_step_height label"
msgid "Gradual Infill Step Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_infill_step_height description"
msgid ""
"The height of infill of a given density before switching to half the density."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_before_walls label"
msgid "Infill Before Walls"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_before_walls description"
msgid ""
"Print the infill before printing the walls. Printing the walls first may "
"lead to more accurate walls, but overhangs print worse. Printing the infill "
"first leads to sturdier walls, but the infill pattern might sometimes show "
"through the surface."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_infill_area label"
msgid "Minimum Infill Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_infill_area description"
msgid "Don't generate areas of infill smaller than this (use skin instead)."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_support_enabled label"
msgid "Infill Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_support_enabled description"
msgid ""
"Print infill structures only where tops of the model should be supported. "
"Enabling this reduces print time and material usage, but leads to ununiform "
"object strength."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_support_angle label"
msgid "Infill Overhang Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_support_angle description"
msgid ""
"The minimum angle of internal overhangs for which infill is added. At a "
"value of 0° objects are totally filled with infill, 90° will not provide any "
"infill."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_preshrink label"
msgid "Skin Removal Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_preshrink description"
msgid ""
"The largest width of skin areas which are to be removed. Every skin area "
"smaller than this value will disappear. This can help in limiting the amount "
"of time and material spent on printing top/bottom skin at slanted surfaces "
"in the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_skin_preshrink label"
msgid "Top Skin Removal Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_skin_preshrink description"
msgid ""
"The largest width of top skin areas which are to be removed. Every skin area "
"smaller than this value will disappear. This can help in limiting the amount "
"of time and material spent on printing top skin at slanted surfaces in the "
"model."
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_skin_preshrink label"
msgid "Bottom Skin Removal Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_skin_preshrink description"
msgid ""
"The largest width of bottom skin areas which are to be removed. Every skin "
"area smaller than this value will disappear. This can help in limiting the "
"amount of time and material spent on printing bottom skin at slanted "
"surfaces in the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "expand_skins_expand_distance label"
msgid "Skin Expand Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "expand_skins_expand_distance description"
msgid ""
"The distance the skins are expanded into the infill. Higher values makes the "
"skin attach better to the infill pattern and makes the walls on neighboring "
"layers adhere better to the skin. Lower values save amount of material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "top_skin_expand_distance label"
msgid "Top Skin Expand Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "top_skin_expand_distance description"
msgid ""
"The distance the top skins are expanded into the infill. Higher values makes "
"the skin attach better to the infill pattern and makes the walls on the "
"layer above adhere better to the skin. Lower values save amount of material "
"used."
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_skin_expand_distance label"
msgid "Bottom Skin Expand Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "bottom_skin_expand_distance description"
msgid ""
"The distance the bottom skins are expanded into the infill. Higher values "
"makes the skin attach better to the infill pattern and makes the skin adhere "
"better to the walls on the layer below. Lower values save amount of material "
"used."
msgstr ""

#: fdmprinter.def.json
msgctxt "max_skin_angle_for_expansion label"
msgid "Maximum Skin Angle for Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "max_skin_angle_for_expansion description"
msgid ""
"Top and/or bottom surfaces of your object with an angle larger than this "
"setting, won't have their top/bottom skin expanded. This avoids expanding "
"the narrow skin areas that are created when the model surface has a near "
"vertical slope. An angle of 0° is horizontal, while an angle of 90° is "
"vertical."
msgstr ""

#: fdmprinter.def.json
msgctxt "min_skin_width_for_expansion label"
msgid "Minimum Skin Width for Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "min_skin_width_for_expansion description"
msgid ""
"Skin areas narrower than this are not expanded. This avoids expanding the "
"narrow skin areas that are created when the model surface has a slope close "
"to the vertical."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_edge_support_thickness label"
msgid "Skin Edge Support Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_edge_support_thickness description"
msgid "The thickness of the extra infill that supports skin edges."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_edge_support_layers label"
msgid "Skin Edge Support Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_edge_support_layers description"
msgid "The number of infill layers that supports skin edges."
msgstr ""

#: fdmprinter.def.json
msgctxt "material label"
msgid "Material"
msgstr ""

#: fdmprinter.def.json
msgctxt "material description"
msgid "Material"
msgstr ""

#: fdmprinter.def.json
msgctxt "default_material_print_temperature label"
msgid "Default Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "default_material_print_temperature description"
msgid ""
"The default temperature used for printing. This should be the \"base\" "
"temperature of a material. All other print temperatures should use offsets "
"based on this value"
msgstr ""

#: fdmprinter.def.json
msgctxt "build_volume_temperature label"
msgid "Build Volume Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "build_volume_temperature description"
msgid ""
"The temperature of the environment to print in. If this is 0, the build "
"volume temperature will not be adjusted."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temperature label"
msgid "Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temperature description"
msgid "The temperature used for printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temperature_layer_0 label"
msgid "Printing Temperature Initial Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_print_temperature_layer_0 description"
msgid ""
"The temperature used for printing the first layer. Set at 0 to disable "
"special handling of the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_initial_print_temperature label"
msgid "Initial Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_initial_print_temperature description"
msgid ""
"The minimal temperature while heating up to the Printing Temperature at "
"which printing can already start."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_final_print_temperature label"
msgid "Final Printing Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_final_print_temperature description"
msgid ""
"The temperature to which to already start cooling down just before the end "
"of printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_extrusion_cool_down_speed label"
msgid "Extrusion Cool Down Speed Modifier"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_extrusion_cool_down_speed description"
msgid ""
"The extra speed by which the nozzle cools while extruding. The same value is "
"used to signify the heat up speed lost when heating up while extruding."
msgstr ""

#: fdmprinter.def.json
msgctxt "default_material_bed_temperature label"
msgid "Default Build Plate Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "default_material_bed_temperature description"
msgid ""
"The default temperature used for the heated build plate. This should be the "
"\"base\" temperature of a build plate. All other print temperatures should "
"use offsets based on this value"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temperature label"
msgid "Build Plate Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temperature description"
msgid ""
"The temperature used for the heated build plate. If this is 0, the bed "
"temperature will not be adjusted."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temperature_layer_0 label"
msgid "Build Plate Temperature Initial Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_bed_temperature_layer_0 description"
msgid "The temperature used for the heated build plate at the first layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_adhesion_tendency label"
msgid "Adhesion Tendency"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_adhesion_tendency description"
msgid "Surface adhesion tendency."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_surface_energy label"
msgid "Surface Energy"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_surface_energy description"
msgid "Surface energy."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_shrinkage_percentage label"
msgid "Shrinkage Ratio"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_shrinkage_percentage description"
msgid "Shrinkage ratio in percentage."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_crystallinity label"
msgid "Crystalline Material"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_crystallinity description"
msgid ""
"Is this material the type that breaks off cleanly when heated (crystalline), "
"or is it the type that produces long intertwined polymer chains (non-"
"crystalline)?"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_anti_ooze_retracted_position label"
msgid "Anti-ooze Retracted Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_anti_ooze_retracted_position description"
msgid "How far the material needs to be retracted before it stops oozing."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_anti_ooze_retraction_speed label"
msgid "Anti-ooze Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_anti_ooze_retraction_speed description"
msgid ""
"How fast the material needs to be retracted during a filament switch to "
"prevent oozing."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_retracted_position label"
msgid "Break Preparation Retracted Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_retracted_position description"
msgid "How far the filament can be stretched before it breaks, while heated."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_speed label"
msgid "Break Preparation Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_speed description"
msgid ""
"How fast the filament needs to be retracted just before breaking it off in a "
"retraction."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_temperature label"
msgid "Break Preparation Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_preparation_temperature description"
msgid ""
"The temperature used to purge material, should be roughly equal to the "
"highest possible printing temperature."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_retracted_position label"
msgid "Break Retracted Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_retracted_position description"
msgid "How far to retract the filament in order to break it cleanly."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_speed label"
msgid "Break Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_speed description"
msgid ""
"The speed at which to retract the filament in order to break it cleanly."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_temperature label"
msgid "Break Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_break_temperature description"
msgid "The temperature at which the filament is broken for a clean break."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flush_purge_speed label"
msgid "Flush Purge Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flush_purge_speed description"
msgid "How fast to prime the material after switching to a different material."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flush_purge_length label"
msgid "Flush Purge Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flush_purge_length description"
msgid ""
"How much material to use to purge the previous material out of the nozzle "
"(in length of filament) when switching to a different material."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_end_of_filament_purge_speed label"
msgid "End of Filament Purge Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_end_of_filament_purge_speed description"
msgid ""
"How fast to prime the material after replacing an empty spool with a fresh "
"spool of the same material."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_end_of_filament_purge_length label"
msgid "End of Filament Purge Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_end_of_filament_purge_length description"
msgid ""
"How much material to use to purge the previous material out of the nozzle "
"(in length of filament) when replacing an empty spool with a fresh spool of "
"the same material."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_maximum_park_duration label"
msgid "Maximum Park Duration"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_maximum_park_duration description"
msgid "How long the material can be kept out of dry storage safely."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_no_load_move_factor label"
msgid "No Load Move Factor"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_no_load_move_factor description"
msgid ""
"A factor indicating how much the filament gets compressed between the feeder "
"and the nozzle chamber, used to determine how far to move the material for a "
"filament switch."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow label"
msgid "Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow description"
msgid ""
"Flow compensation: the amount of material extruded is multiplied by this "
"value."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_material_flow label"
msgid "Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_material_flow description"
msgid "Flow compensation on wall lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_material_flow label"
msgid "Outer Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_0_material_flow description"
msgid "Flow compensation on the outermost wall line."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_material_flow label"
msgid "Inner Wall(s) Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_x_material_flow description"
msgid ""
"Flow compensation on wall lines for all wall lines except the outermost one."
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_material_flow label"
msgid "Top/Bottom Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "skin_material_flow description"
msgid "Flow compensation on top/bottom lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_material_flow label"
msgid "Top Surface Skin Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_material_flow description"
msgid "Flow compensation on lines of the areas at the top of the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_material_flow label"
msgid "Infill Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_material_flow description"
msgid "Flow compensation on infill lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_material_flow label"
msgid "Skirt/Brim Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_material_flow description"
msgid "Flow compensation on skirt or brim lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_material_flow label"
msgid "Support Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_material_flow description"
msgid "Flow compensation on support structure lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_material_flow label"
msgid "Support Interface Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_material_flow description"
msgid "Flow compensation on lines of support roof or floor."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_material_flow label"
msgid "Support Roof Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_material_flow description"
msgid "Flow compensation on support roof lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_material_flow label"
msgid "Support Floor Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_material_flow description"
msgid "Flow compensation on support floor lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_flow label"
msgid "Prime Tower Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_flow description"
msgid "Flow compensation on prime tower lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_layer_0 label"
msgid "Initial Layer Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_layer_0 description"
msgid ""
"Flow compensation for the first layer: the amount of material extruded on "
"the initial layer is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_standby_temperature label"
msgid "Standby Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_standby_temperature description"
msgid ""
"The temperature of the nozzle when another nozzle is currently used for "
"printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed label"
msgid "Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed description"
msgid "Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_print label"
msgid "Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_print description"
msgid "The speed at which printing happens."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_infill label"
msgid "Infill Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_infill description"
msgid "The speed at which infill is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall label"
msgid "Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall description"
msgid "The speed at which the walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall_0 label"
msgid "Outer Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall_0 description"
msgid ""
"The speed at which the outermost walls are printed. Printing the outer wall "
"at a lower speed improves the final skin quality. However, having a large "
"difference between the inner wall speed and the outer wall speed will affect "
"quality in a negative way."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall_x label"
msgid "Inner Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_wall_x description"
msgid ""
"The speed at which all inner walls are printed. Printing the inner wall "
"faster than the outer wall will reduce printing time. It works well to set "
"this in between the outer wall speed and the infill speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_roofing label"
msgid "Top Surface Skin Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_roofing description"
msgid "The speed at which top surface skin layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_topbottom label"
msgid "Top/Bottom Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_topbottom description"
msgid "The speed at which top/bottom layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support label"
msgid "Support Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support description"
msgid ""
"The speed at which the support structure is printed. Printing support at "
"higher speeds can greatly reduce printing time. The surface quality of the "
"support structure is not important since it is removed after printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_infill label"
msgid "Support Infill Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_infill description"
msgid ""
"The speed at which the infill of support is printed. Printing the infill at "
"lower speeds improves stability."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_interface label"
msgid "Support Interface Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_interface description"
msgid ""
"The speed at which the roofs and floors of support are printed. Printing "
"them at lower speeds can improve overhang quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_roof label"
msgid "Support Roof Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_roof description"
msgid ""
"The speed at which the roofs of support are printed. Printing them at lower "
"speeds can improve overhang quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_bottom label"
msgid "Support Floor Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_support_bottom description"
msgid ""
"The speed at which the floor of support is printed. Printing it at lower "
"speed can improve adhesion of support on top of your model."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_prime_tower label"
msgid "Prime Tower Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_prime_tower description"
msgid ""
"The speed at which the prime tower is printed. Printing the prime tower "
"slower can make it more stable when the adhesion between the different "
"filaments is suboptimal."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_travel label"
msgid "Travel Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_travel description"
msgid "The speed at which travel moves are made."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_layer_0 label"
msgid "Initial Layer Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_layer_0 description"
msgid ""
"The speed for the initial layer. A lower value is advised to improve "
"adhesion to the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_print_layer_0 label"
msgid "Initial Layer Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_print_layer_0 description"
msgid ""
"The speed of printing for the initial layer. A lower value is advised to "
"improve adhesion to the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_travel_layer_0 label"
msgid "Initial Layer Travel Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_travel_layer_0 description"
msgid ""
"The speed of travel moves in the initial layer. A lower value is advised to "
"prevent pulling previously printed parts away from the build plate. The "
"value of this setting can automatically be calculated from the ratio between "
"the Travel Speed and the Print Speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_speed label"
msgid "Skirt/Brim Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_speed description"
msgid ""
"The speed at which the skirt and brim are printed. Normally this is done at "
"the initial layer speed, but sometimes you might want to print the skirt or "
"brim at a different speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_z_hop label"
msgid "Z Hop Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_z_hop description"
msgid ""
"The speed at which the vertical Z movement is made for Z Hops. This is "
"typically lower than the print speed since the build plate or machine's "
"gantry is harder to move."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_slowdown_layers label"
msgid "Number of Slower Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_slowdown_layers description"
msgid ""
"The first few layers are printed slower than the rest of the model, to get "
"better adhesion to the build plate and improve the overall success rate of "
"prints. The speed is gradually increased over these layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_equalize_flow_enabled label"
msgid "Equalize Filament Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_equalize_flow_enabled description"
msgid ""
"Print thinner than normal lines faster so that the amount of material "
"extruded per second remains the same. Thin pieces in your model might "
"require lines printed with smaller line width than provided in the settings. "
"This setting controls the speed changes for such lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_equalize_flow_max label"
msgid "Maximum Speed for Flow Equalization"
msgstr ""

#: fdmprinter.def.json
msgctxt "speed_equalize_flow_max description"
msgid ""
"Maximum print speed when adjusting the print speed in order to equalize flow."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_enabled label"
msgid "Enable Acceleration Control"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_enabled description"
msgid ""
"Enables adjusting the print head acceleration. Increasing the accelerations "
"can reduce printing time at the cost of print quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_print label"
msgid "Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_print description"
msgid "The acceleration with which printing happens."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_infill label"
msgid "Infill Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_infill description"
msgid "The acceleration with which infill is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall label"
msgid "Wall Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall description"
msgid "The acceleration with which the walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall_0 label"
msgid "Outer Wall Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall_0 description"
msgid "The acceleration with which the outermost walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall_x label"
msgid "Inner Wall Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_wall_x description"
msgid "The acceleration with which all inner walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_roofing label"
msgid "Top Surface Skin Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_roofing description"
msgid "The acceleration with which top surface skin layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_topbottom label"
msgid "Top/Bottom Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_topbottom description"
msgid "The acceleration with which top/bottom layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support label"
msgid "Support Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support description"
msgid "The acceleration with which the support structure is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_infill label"
msgid "Support Infill Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_infill description"
msgid "The acceleration with which the infill of support is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_interface label"
msgid "Support Interface Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_interface description"
msgid ""
"The acceleration with which the roofs and floors of support are printed. "
"Printing them at lower acceleration can improve overhang quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_roof label"
msgid "Support Roof Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_roof description"
msgid ""
"The acceleration with which the roofs of support are printed. Printing them "
"at lower acceleration can improve overhang quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_bottom label"
msgid "Support Floor Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_support_bottom description"
msgid ""
"The acceleration with which the floors of support are printed. Printing them "
"at lower acceleration can improve adhesion of support on top of your model."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_prime_tower label"
msgid "Prime Tower Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_prime_tower description"
msgid "The acceleration with which the prime tower is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel label"
msgid "Travel Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel description"
msgid "The acceleration with which travel moves are made."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_layer_0 label"
msgid "Initial Layer Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_layer_0 description"
msgid "The acceleration for the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_print_layer_0 label"
msgid "Initial Layer Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_print_layer_0 description"
msgid "The acceleration during the printing of the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel_layer_0 label"
msgid "Initial Layer Travel Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_travel_layer_0 description"
msgid "The acceleration for travel moves in the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_skirt_brim label"
msgid "Skirt/Brim Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "acceleration_skirt_brim description"
msgid ""
"The acceleration with which the skirt and brim are printed. Normally this is "
"done with the initial layer acceleration, but sometimes you might want to "
"print the skirt or brim at a different acceleration."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_enabled label"
msgid "Enable Jerk Control"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_enabled description"
msgid ""
"Enables adjusting the jerk of print head when the velocity in the X or Y "
"axis changes. Increasing the jerk can reduce printing time at the cost of "
"print quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_print label"
msgid "Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_print description"
msgid "The maximum instantaneous velocity change of the print head."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_infill label"
msgid "Infill Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_infill description"
msgid "The maximum instantaneous velocity change with which infill is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall label"
msgid "Wall Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall description"
msgid ""
"The maximum instantaneous velocity change with which the walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall_0 label"
msgid "Outer Wall Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall_0 description"
msgid ""
"The maximum instantaneous velocity change with which the outermost walls are "
"printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall_x label"
msgid "Inner Wall Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_wall_x description"
msgid ""
"The maximum instantaneous velocity change with which all inner walls are "
"printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_roofing label"
msgid "Top Surface Skin Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_roofing description"
msgid ""
"The maximum instantaneous velocity change with which top surface skin layers "
"are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_topbottom label"
msgid "Top/Bottom Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_topbottom description"
msgid ""
"The maximum instantaneous velocity change with which top/bottom layers are "
"printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support label"
msgid "Support Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support description"
msgid ""
"The maximum instantaneous velocity change with which the support structure "
"is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_infill label"
msgid "Support Infill Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_infill description"
msgid ""
"The maximum instantaneous velocity change with which the infill of support "
"is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_interface label"
msgid "Support Interface Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_interface description"
msgid ""
"The maximum instantaneous velocity change with which the roofs and floors of "
"support are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_roof label"
msgid "Support Roof Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_roof description"
msgid ""
"The maximum instantaneous velocity change with which the roofs of support "
"are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_bottom label"
msgid "Support Floor Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_support_bottom description"
msgid ""
"The maximum instantaneous velocity change with which the floors of support "
"are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_prime_tower label"
msgid "Prime Tower Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_prime_tower description"
msgid ""
"The maximum instantaneous velocity change with which the prime tower is "
"printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel label"
msgid "Travel Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel description"
msgid ""
"The maximum instantaneous velocity change with which travel moves are made."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_layer_0 label"
msgid "Initial Layer Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_layer_0 description"
msgid "The print maximum instantaneous velocity change for the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_print_layer_0 label"
msgid "Initial Layer Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_print_layer_0 description"
msgid ""
"The maximum instantaneous velocity change during the printing of the initial "
"layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel_layer_0 label"
msgid "Initial Layer Travel Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_travel_layer_0 description"
msgid "The acceleration for travel moves in the initial layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_skirt_brim label"
msgid "Skirt/Brim Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "jerk_skirt_brim description"
msgid ""
"The maximum instantaneous velocity change with which the skirt and brim are "
"printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel label"
msgid "Travel"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel description"
msgid "travel"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_enable label"
msgid "Enable Retraction"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_enable description"
msgid "Retract the filament when the nozzle is moving over a non-printed area."
msgstr ""

#: fdmprinter.def.json
msgctxt "retract_at_layer_change label"
msgid "Retract at Layer Change"
msgstr ""

#: fdmprinter.def.json
msgctxt "retract_at_layer_change description"
msgid "Retract the filament when the nozzle is moving to the next layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_amount label"
msgid "Retraction Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_amount description"
msgid "The length of material retracted during a retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_speed label"
msgid "Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_speed description"
msgid ""
"The speed at which the filament is retracted and primed during a retraction "
"move."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_retract_speed label"
msgid "Retraction Retract Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_retract_speed description"
msgid "The speed at which the filament is retracted during a retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_prime_speed label"
msgid "Retraction Prime Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_prime_speed description"
msgid "The speed at which the filament is primed during a retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_extra_prime_amount label"
msgid "Retraction Extra Prime Amount"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_extra_prime_amount description"
msgid ""
"Some material can ooze away during a travel move, which can be compensated "
"for here."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_min_travel label"
msgid "Retraction Minimum Travel"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_min_travel description"
msgid ""
"The minimum distance of travel needed for a retraction to happen at all. "
"This helps to get fewer retractions in a small area."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_count_max label"
msgid "Maximum Retraction Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_count_max description"
msgid ""
"This setting limits the number of retractions occurring within the minimum "
"extrusion distance window. Further retractions within this window will be "
"ignored. This avoids retracting repeatedly on the same piece of filament, as "
"that can flatten the filament and cause grinding issues."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_extrusion_window label"
msgid "Minimum Extrusion Distance Window"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_extrusion_window description"
msgid ""
"The window in which the maximum retraction count is enforced. This value "
"should be approximately the same as the retraction distance, so that "
"effectively the number of times a retraction passes the same patch of "
"material is limited."
msgstr ""

#: fdmprinter.def.json
msgctxt "limit_support_retractions label"
msgid "Limit Support Retractions"
msgstr ""

#: fdmprinter.def.json
msgctxt "limit_support_retractions description"
msgid ""
"Omit retraction when moving from support to support in a straight line. "
"Enabling this setting saves print time, but can lead to excessive stringing "
"within the support structure."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing label"
msgid "Combing Mode"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing description"
msgid ""
"Combing keeps the nozzle within already printed areas when traveling. This "
"results in slightly longer travel moves but reduces the need for "
"retractions. If combing is off, the material will retract and the nozzle "
"moves in a straight line to the next point. It is also possible to avoid "
"combing over top/bottom skin areas or to only comb within the infill."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option off"
msgid "Off"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option all"
msgid "All"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option noskin"
msgid "Not in Skin"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing option infill"
msgid "Within Infill"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing_max_distance label"
msgid "Max Comb Distance With No Retract"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_combing_max_distance description"
msgid ""
"When non-zero, combing travel moves that are longer than this distance will "
"use retraction."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_retract_before_outer_wall label"
msgid "Retract Before Outer Wall"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_retract_before_outer_wall description"
msgid "Always retract when moving to start an outer wall."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_other_parts label"
msgid "Avoid Printed Parts When Traveling"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_other_parts description"
msgid ""
"The nozzle avoids already printed parts when traveling. This option is only "
"available when combing is enabled."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_supports label"
msgid "Avoid Supports When Traveling"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_supports description"
msgid ""
"The nozzle avoids already printed supports when traveling. This option is "
"only available when combing is enabled."
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_distance label"
msgid "Travel Avoid Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "travel_avoid_distance description"
msgid ""
"The distance between the nozzle and already printed parts when avoiding "
"during travel moves."
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_start_x label"
msgid "Layer Start X"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_start_x description"
msgid ""
"The X coordinate of the position near where to find the part to start "
"printing each layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_start_y label"
msgid "Layer Start Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_start_y description"
msgid ""
"The Y coordinate of the position near where to find the part to start "
"printing each layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_enabled label"
msgid "Z Hop When Retracted"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_enabled description"
msgid ""
"Whenever a retraction is done, the build plate is lowered to create "
"clearance between the nozzle and the print. It prevents the nozzle from "
"hitting the print during travel moves, reducing the chance to knock the "
"print from the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_only_when_collides label"
msgid "Z Hop Only Over Printed Parts"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_only_when_collides description"
msgid ""
"Only perform a Z Hop when moving over printed parts which cannot be avoided "
"by horizontal motion by Avoid Printed Parts when Traveling."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop label"
msgid "Z Hop Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop description"
msgid "The height difference when performing a Z Hop."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_after_extruder_switch label"
msgid "Z Hop After Extruder Switch"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_after_extruder_switch description"
msgid ""
"After the machine switched from one extruder to the other, the build plate "
"is lowered to create clearance between the nozzle and the print. This "
"prevents the nozzle from leaving oozed material on the outside of a print."
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_after_extruder_switch_height label"
msgid "Z Hop After Extruder Switch Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "retraction_hop_after_extruder_switch_height description"
msgid "The height difference when performing a Z Hop after extruder switch."
msgstr ""

#: fdmprinter.def.json
msgctxt "cooling label"
msgid "Cooling"
msgstr ""

#: fdmprinter.def.json
msgctxt "cooling description"
msgid "Cooling"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_enabled label"
msgid "Enable Print Cooling"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_enabled description"
msgid ""
"Enables the print cooling fans while printing. The fans improve print "
"quality on layers with short layer times and bridging / overhangs."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed label"
msgid "Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed description"
msgid "The speed at which the print cooling fans spin."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_min label"
msgid "Regular Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_min description"
msgid ""
"The speed at which the fans spin before hitting the threshold. When a layer "
"prints faster than the threshold, the fan speed gradually inclines towards "
"the maximum fan speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_max label"
msgid "Maximum Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_max description"
msgid ""
"The speed at which the fans spin on the minimum layer time. The fan speed "
"gradually increases between the regular fan speed and maximum fan speed when "
"the threshold is hit."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_layer_time_fan_speed_max label"
msgid "Regular/Maximum Fan Speed Threshold"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_layer_time_fan_speed_max description"
msgid ""
"The layer time which sets the threshold between regular fan speed and "
"maximum fan speed. Layers that print slower than this time use regular fan "
"speed. For faster layers the fan speed gradually increases towards the "
"maximum fan speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_0 label"
msgid "Initial Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_speed_0 description"
msgid ""
"The speed at which the fans spin at the start of the print. In subsequent "
"layers the fan speed is gradually increased up to the layer corresponding to "
"Regular Fan Speed at Height."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_full_at_height label"
msgid "Regular Fan Speed at Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_full_at_height description"
msgid ""
"The height at which the fans spin on regular fan speed. At the layers below "
"the fan speed gradually increases from Initial Fan Speed to Regular Fan "
"Speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_full_layer label"
msgid "Regular Fan Speed at Layer"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_fan_full_layer description"
msgid ""
"The layer at which the fans spin on regular fan speed. If regular fan speed "
"at height is set, this value is calculated and rounded to a whole number."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_layer_time label"
msgid "Minimum Layer Time"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_layer_time description"
msgid ""
"The minimum time spent in a layer. This forces the printer to slow down, to "
"at least spend the time set here in one layer. This allows the printed "
"material to cool down properly before printing the next layer. Layers may "
"still take shorter than the minimal layer time if Lift Head is disabled and "
"if the Minimum Speed would otherwise be violated."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_speed label"
msgid "Minimum Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_min_speed description"
msgid ""
"The minimum print speed, despite slowing down due to the minimum layer time. "
"When the printer would slow down too much, the pressure in the nozzle would "
"be too low and result in bad print quality."
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_lift_head label"
msgid "Lift Head"
msgstr ""

#: fdmprinter.def.json
msgctxt "cool_lift_head description"
msgid ""
"When the minimum speed is hit because of minimum layer time, lift the head "
"away from the print and wait the extra time until the minimum layer time is "
"reached."
msgstr ""

#: fdmprinter.def.json
msgctxt "support label"
msgid "Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "support description"
msgid "Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_enable label"
msgid "Generate Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_enable description"
msgid ""
"Generate structures to support parts of the model which have overhangs. "
"Without these structures, such parts would collapse during printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_extruder_nr label"
msgid "Support Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_extruder_nr description"
msgid ""
"The extruder train to use for printing the support. This is used in multi-"
"extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_extruder_nr label"
msgid "Support Infill Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_extruder_nr description"
msgid ""
"The extruder train to use for printing the infill of the support. This is "
"used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_extruder_nr_layer_0 label"
msgid "First Layer Support Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_extruder_nr_layer_0 description"
msgid ""
"The extruder train to use for printing the first layer of support infill. "
"This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_extruder_nr label"
msgid "Support Interface Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_extruder_nr description"
msgid ""
"The extruder train to use for printing the roofs and floors of the support. "
"This is used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_extruder_nr label"
msgid "Support Roof Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_extruder_nr description"
msgid ""
"The extruder train to use for printing the roofs of the support. This is "
"used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_extruder_nr label"
msgid "Support Floor Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_extruder_nr description"
msgid ""
"The extruder train to use for printing the floors of the support. This is "
"used in multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_structure label"
msgid "Support Structure"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_structure description"
msgid ""
"Chooses between the techniques available to generate support. \"Normal\" "
"support creates a support structure directly below the overhanging parts and "
"drops those areas straight down. \"Tree\" support creates branches towards "
"the overhanging areas that support the model on the tips of those branches, "
"and allows the branches to crawl around the model to support it from the "
"build plate as much as possible."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_structure option normal"
msgid "Normal"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_structure option tree"
msgid "Tree"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_angle label"
msgid "Tree Support Branch Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_angle description"
msgid ""
"The angle of the branches. Use a lower angle to make them more vertical and "
"more stable. Use a higher angle to be able to have more reach."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_distance label"
msgid "Tree Support Branch Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_distance description"
msgid ""
"How far apart the branches need to be when they touch the model. Making this "
"distance small will cause the tree support to touch the model at more "
"points, causing better overhang but making support harder to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_diameter label"
msgid "Tree Support Branch Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_diameter description"
msgid ""
"The diameter of the thinnest branches of tree support. Thicker branches are "
"more sturdy. Branches towards the base will be thicker than this."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_diameter_angle label"
msgid "Tree Support Branch Diameter Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_branch_diameter_angle description"
msgid ""
"The angle of the branches' diameter as they gradually become thicker towards "
"the bottom. An angle of 0 will cause the branches to have uniform thickness "
"over their length. A bit of an angle can increase stability of the tree "
"support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_collision_resolution label"
msgid "Tree Support Collision Resolution"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tree_collision_resolution description"
msgid ""
"Resolution to compute collisions with to avoid hitting the model. Setting "
"this lower will produce more accurate trees that fail less often, but "
"increases slicing time dramatically."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_type label"
msgid "Support Placement"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_type description"
msgid ""
"Adjusts the placement of the support structures. The placement can be set to "
"touching build plate or everywhere. When set to everywhere the support "
"structures will also be printed on the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_type option buildplate"
msgid "Touching Buildplate"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_type option everywhere"
msgid "Everywhere"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_angle label"
msgid "Support Overhang Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_angle description"
msgid ""
"The minimum angle of overhangs for which support is added. At a value of 0° "
"all overhangs are supported, 90° will not provide any support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern label"
msgid "Support Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern description"
msgid ""
"The pattern of the support structures of the print. The different options "
"available result in sturdy or easy to remove support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option cross"
msgid "Cross"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_pattern option gyroid"
msgid "Gyroid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_wall_count label"
msgid "Support Wall Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_wall_count description"
msgid ""
"The number of walls with which to surround support infill. Adding a wall can "
"make support print more reliably and can support overhangs better, but "
"increases print time and material used."
msgstr ""

#: fdmprinter.def.json
msgctxt "zig_zaggify_support label"
msgid "Connect Support Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "zig_zaggify_support description"
msgid ""
"Connect the ends of the support lines together. Enabling this setting can "
"make your support more sturdy and reduce underextrusion, but it will cost "
"more material."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_connect_zigzags label"
msgid "Connect Support ZigZags"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_connect_zigzags description"
msgid ""
"Connect the ZigZags. This will increase the strength of the zig zag support "
"structure."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_rate label"
msgid "Support Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_rate description"
msgid ""
"Adjusts the density of the support structure. A higher value results in "
"better overhangs, but the supports are harder to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_line_distance label"
msgid "Support Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_line_distance description"
msgid ""
"Distance between the printed support structure lines. This setting is "
"calculated by the support density."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_initial_layer_line_distance label"
msgid "Initial Layer Support Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_initial_layer_line_distance description"
msgid ""
"Distance between the printed initial layer support structure lines. This "
"setting is calculated by the support density."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_angles label"
msgid "Support Infill Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_angles description"
msgid ""
"A list of integer line directions to use. Elements from the list are used "
"sequentially as the layers progress and when the end of the list is reached, "
"it starts at the beginning again. The list items are separated by commas and "
"the whole list is contained in square brackets. Default is an empty list "
"which means use the default angle 0 degrees."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_enable label"
msgid "Enable Support Brim"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_enable description"
msgid ""
"Generate a brim within the support infill regions of the first layer. This "
"brim is printed underneath the support, not around it. Enabling this setting "
"increases the adhesion of support to the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_width label"
msgid "Support Brim Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_width description"
msgid ""
"The width of the brim to print underneath the support. A larger brim "
"enhances adhesion to the build plate, at the cost of some extra material."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_line_count label"
msgid "Support Brim Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_brim_line_count description"
msgid ""
"The number of lines used for the support brim. More brim lines enhance "
"adhesion to the build plate, at the cost of some extra material."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_z_distance label"
msgid "Support Z Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_z_distance description"
msgid ""
"Distance from the top/bottom of the support structure to the print. This gap "
"provides clearance to remove the supports after the model is printed. This "
"value is rounded up to a multiple of the layer height."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_top_distance label"
msgid "Support Top Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_top_distance description"
msgid "Distance from the top of the support to the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_distance label"
msgid "Support Bottom Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_distance description"
msgid "Distance from the print to the bottom of the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_distance label"
msgid "Support X/Y Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_distance description"
msgid "Distance of the support structure from the print in the X/Y directions."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_overrides_z label"
msgid "Support Distance Priority"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_overrides_z description"
msgid ""
"Whether the Support X/Y Distance overrides the Support Z Distance or vice "
"versa. When X/Y overrides Z the X/Y distance can push away the support from "
"the model, influencing the actual Z distance to the overhang. We can disable "
"this by not applying the X/Y distance around overhangs."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_overrides_z option xy_overrides_z"
msgid "X/Y overrides Z"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_overrides_z option z_overrides_xy"
msgid "Z overrides X/Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_distance_overhang label"
msgid "Minimum Support X/Y Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_xy_distance_overhang description"
msgid ""
"Distance of the support structure from the overhang in the X/Y directions."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_height label"
msgid "Support Stair Step Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_height description"
msgid ""
"The height of the steps of the stair-like bottom of support resting on the "
"model. A low value makes the support harder to remove, but too high values "
"can lead to unstable support structures. Set to zero to turn off the stair-"
"like behaviour."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_width label"
msgid "Support Stair Step Maximum Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_width description"
msgid ""
"The maximum width of the steps of the stair-like bottom of support resting "
"on the model. A low value makes the support harder to remove, but too high "
"values can lead to unstable support structures."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_min_slope label"
msgid "Support Stair Step Minimum Slope Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_stair_step_min_slope description"
msgid ""
"The minimum slope of the area for stair-stepping to take effect. Low values "
"should make support easier to remove on shallower slopes, but really low "
"values may result in some very counter-intuitive results on other parts of "
"the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_join_distance label"
msgid "Support Join Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_join_distance description"
msgid ""
"The maximum distance between support structures in the X/Y directions. When "
"separate structures are closer together than this value, the structures "
"merge into one."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_offset label"
msgid "Support Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_offset description"
msgid ""
"Amount of offset applied to all support polygons in each layer. Positive "
"values can smooth out the support areas and result in more sturdy support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_sparse_thickness label"
msgid "Support Infill Layer Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_infill_sparse_thickness description"
msgid ""
"The thickness per layer of support infill material. This value should always "
"be a multiple of the layer height and is otherwise rounded."
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_support_infill_steps label"
msgid "Gradual Support Infill Steps"
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_support_infill_steps description"
msgid ""
"Number of times to reduce the support infill density by half when getting "
"further below top surfaces. Areas which are closer to top surfaces get a "
"higher density, up to the Support Infill Density."
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_support_infill_step_height label"
msgid "Gradual Support Infill Step Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "gradual_support_infill_step_height description"
msgid ""
"The height of support infill of a given density before switching to half the "
"density."
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_support_area label"
msgid "Minimum Support Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_support_area description"
msgid ""
"Minimum area size for support polygons. Polygons which have an area smaller "
"than this value will not be generated."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_enable label"
msgid "Enable Support Interface"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_enable description"
msgid ""
"Generate a dense interface between the model and the support. This will "
"create a skin at the top of the support on which the model is printed and at "
"the bottom of the support, where it rests on the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_enable label"
msgid "Enable Support Roof"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_enable description"
msgid ""
"Generate a dense slab of material between the top of support and the model. "
"This will create a skin between the model and support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_enable label"
msgid "Enable Support Floor"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_enable description"
msgid ""
"Generate a dense slab of material between the bottom of the support and the "
"model. This will create a skin between the model and support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_height label"
msgid "Support Interface Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_height description"
msgid ""
"The thickness of the interface of the support where it touches with the "
"model on the bottom or the top."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_height label"
msgid "Support Roof Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_height description"
msgid ""
"The thickness of the support roofs. This controls the amount of dense layers "
"at the top of the support on which the model rests."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_height label"
msgid "Support Floor Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_height description"
msgid ""
"The thickness of the support floors. This controls the number of dense "
"layers that are printed on top of places of a model on which support rests."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_skip_height label"
msgid "Support Interface Resolution"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_skip_height description"
msgid ""
"When checking where there's model above and below the support, take steps of "
"the given height. Lower values will slice slower, while higher values may "
"cause normal support to be printed in some places where there should have "
"been support interface."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_density label"
msgid "Support Interface Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_density description"
msgid ""
"Adjusts the density of the roofs and floors of the support structure. A "
"higher value results in better overhangs, but the supports are harder to "
"remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_density label"
msgid "Support Roof Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_density description"
msgid ""
"The density of the roofs of the support structure. A higher value results in "
"better overhangs, but the supports are harder to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_line_distance label"
msgid "Support Roof Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_line_distance description"
msgid ""
"Distance between the printed support roof lines. This setting is calculated "
"by the Support Roof Density, but can be adjusted separately."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_density label"
msgid "Support Floor Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_density description"
msgid ""
"The density of the floors of the support structure. A higher value results "
"in better adhesion of the support on top of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_line_distance label"
msgid "Support Floor Line Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_line_distance description"
msgid ""
"Distance between the printed support floor lines. This setting is calculated "
"by the Support Floor Density, but can be adjusted separately."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern label"
msgid "Support Interface Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern description"
msgid ""
"The pattern with which the interface of the support with the model is "
"printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern label"
msgid "Support Roof Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern description"
msgid "The pattern with which the roofs of the support are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern label"
msgid "Support Floor Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern description"
msgid "The pattern with which the floors of the support are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option grid"
msgid "Grid"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option triangles"
msgid "Triangles"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_interface_area label"
msgid "Minimum Support Interface Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_interface_area description"
msgid ""
"Minimum area size for support interface polygons. Polygons which have an "
"area smaller than this value will be printed as normal support."
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_roof_area label"
msgid "Minimum Support Roof Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_roof_area description"
msgid ""
"Minimum area size for the roofs of the support. Polygons which have an area "
"smaller than this value will be printed as normal support."
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_bottom_area label"
msgid "Minimum Support Floor Area"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_bottom_area description"
msgid ""
"Minimum area size for the floors of the support. Polygons which have an area "
"smaller than this value will be printed as normal support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_offset label"
msgid "Support Interface Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_offset description"
msgid "Amount of offset applied to the support interface polygons."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_offset label"
msgid "Support Roof Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_offset description"
msgid "Amount of offset applied to the roofs of the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_offset label"
msgid "Support Floor Horizontal Expansion"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_offset description"
msgid "Amount of offset applied to the floors of the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_angles label"
msgid "Support Interface Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_interface_angles description"
msgid ""
"A list of integer line directions to use. Elements from the list are used "
"sequentially as the layers progress and when the end of the list is reached, "
"it starts at the beginning again. The list items are separated by commas and "
"the whole list is contained in square brackets. Default is an empty list "
"which means use the default angles (alternates between 45 and 135 degrees if "
"interfaces are quite thick or 90 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_angles label"
msgid "Support Roof Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_roof_angles description"
msgid ""
"A list of integer line directions to use. Elements from the list are used "
"sequentially as the layers progress and when the end of the list is reached, "
"it starts at the beginning again. The list items are separated by commas and "
"the whole list is contained in square brackets. Default is an empty list "
"which means use the default angles (alternates between 45 and 135 degrees if "
"interfaces are quite thick or 90 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_angles label"
msgid "Support Floor Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_bottom_angles description"
msgid ""
"A list of integer line directions to use. Elements from the list are used "
"sequentially as the layers progress and when the end of the list is reached, "
"it starts at the beginning again. The list items are separated by commas and "
"the whole list is contained in square brackets. Default is an empty list "
"which means use the default angles (alternates between 45 and 135 degrees if "
"interfaces are quite thick or 90 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_fan_enable label"
msgid "Fan Speed Override"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_fan_enable description"
msgid ""
"When enabled, the print cooling fan speed is altered for the skin regions "
"immediately above the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_supported_skin_fan_speed label"
msgid "Supported Skin Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_supported_skin_fan_speed description"
msgid ""
"Percentage fan speed to use when printing the skin regions immediately above "
"the support. Using a high fan speed can make the support easier to remove."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_use_towers label"
msgid "Use Towers"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_use_towers description"
msgid ""
"Use specialized towers to support tiny overhang areas. These towers have a "
"larger diameter than the region they support. Near the overhang the towers' "
"diameter decreases, forming a roof."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_diameter label"
msgid "Tower Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_diameter description"
msgid "The diameter of a special tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_maximum_supported_diameter label"
msgid "Maximum Tower-Supported Diameter"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_maximum_supported_diameter description"
msgid ""
"Maximum diameter in the X/Y directions of a small area which is to be "
"supported by a specialized support tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_roof_angle label"
msgid "Tower Roof Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_tower_roof_angle description"
msgid ""
"The angle of a rooftop of a tower. A higher value results in pointed tower "
"roofs, a lower value results in flattened tower roofs."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_mesh_drop_down label"
msgid "Drop Down Support Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_mesh_drop_down description"
msgid ""
"Make support everywhere below the support mesh, so that there's no overhang "
"in the support mesh."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_meshes_present label"
msgid "Scene Has Support Meshes"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_meshes_present description"
msgid ""
"There are support meshes present in the scene. This setting is controlled by "
"Cura."
msgstr ""

#: fdmprinter.def.json
msgctxt "platform_adhesion label"
msgid "Build Plate Adhesion"
msgstr ""

#: fdmprinter.def.json
msgctxt "platform_adhesion description"
msgid "Adhesion"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_blob_enable label"
msgid "Enable Prime Blob"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_blob_enable description"
msgid ""
"Whether to prime the filament with a blob before printing. Turning this "
"setting on will ensure that the extruder will have material ready at the "
"nozzle before printing. Printing Brim or Skirt can act like priming too, in "
"which case turning this setting off saves some time."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_x label"
msgid "Extruder Prime X Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_x description"
msgid ""
"The X coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_y label"
msgid "Extruder Prime Y Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "extruder_prime_pos_y description"
msgid ""
"The Y coordinate of the position where the nozzle primes at the start of "
"printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type label"
msgid "Build Plate Adhesion Type"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type description"
msgid ""
"Different options that help to improve both priming your extrusion and "
"adhesion to the build plate. Brim adds a single layer flat area around the "
"base of your model to prevent warping. Raft adds a thick grid with a roof "
"below the model. Skirt is a line printed around the model, but not connected "
"to the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type option skirt"
msgid "Skirt"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type option brim"
msgid "Brim"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type option raft"
msgid "Raft"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_type option none"
msgid "None"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_extruder_nr label"
msgid "Build Plate Adhesion Extruder"
msgstr ""

#: fdmprinter.def.json
msgctxt "adhesion_extruder_nr description"
msgid ""
"The extruder train to use for printing the skirt/brim/raft. This is used in "
"multi-extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_line_count label"
msgid "Skirt Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_line_count description"
msgid ""
"Multiple skirt lines help to prime your extrusion better for small models. "
"Setting this to 0 will disable the skirt."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_gap label"
msgid "Skirt Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_gap description"
msgid ""
"The horizontal distance between the skirt and the first layer of the print.\n"
"This is the minimum distance. Multiple skirt lines will extend outwards from "
"this distance."
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_minimal_length label"
msgid "Skirt/Brim Minimum Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "skirt_brim_minimal_length description"
msgid ""
"The minimum length of the skirt or brim. If this length is not reached by "
"all skirt or brim lines together, more skirt or brim lines will be added "
"until the minimum length is reached. Note: If the line count is set to 0 "
"this is ignored."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_width label"
msgid "Brim Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_width description"
msgid ""
"The distance from the model to the outermost brim line. A larger brim "
"enhances adhesion to the build plate, but also reduces the effective print "
"area."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_line_count label"
msgid "Brim Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_line_count description"
msgid ""
"The number of lines used for a brim. More brim lines enhance adhesion to the "
"build plate, but also reduces the effective print area."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_gap label"
msgid "Brim Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_gap description"
msgid ""
"The horizontal distance between the first brim line and the outline of the "
"first layer of the print. A small gap can make the brim easier to remove "
"while still providing the thermal benefits."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_replaces_support label"
msgid "Brim Replaces Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_replaces_support description"
msgid ""
"Enforce brim to be printed around the model even if that space would "
"otherwise be occupied by support. This replaces some regions of the first "
"layer of support by brim regions."
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_outside_only label"
msgid "Brim Only on Outside"
msgstr ""

#: fdmprinter.def.json
msgctxt "brim_outside_only description"
msgid ""
"Only print the brim on the outside of the model. This reduces the amount of "
"brim you need to remove afterwards, while it doesn't reduce the bed adhesion "
"that much."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_margin label"
msgid "Raft Extra Margin"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_margin description"
msgid ""
"If the raft is enabled, this is the extra raft area around the model which "
"is also given a raft. Increasing this margin will create a stronger raft "
"while using more material and leaving less area for your print."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_smoothing label"
msgid "Raft Smoothing"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_smoothing description"
msgid ""
"This setting controls how much inner corners in the raft outline are "
"rounded. Inward corners are rounded to a semi circle with a radius equal to "
"the value given here. This setting also removes holes in the raft outline "
"which are smaller than such a circle."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_airgap label"
msgid "Raft Air Gap"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_airgap description"
msgid ""
"The gap between the final raft layer and the first layer of the model. Only "
"the first layer is raised by this amount to lower the bonding between the "
"raft layer and the model. Makes it easier to peel off the raft."
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_0_z_overlap label"
msgid "Initial Layer Z Overlap"
msgstr ""

#: fdmprinter.def.json
msgctxt "layer_0_z_overlap description"
msgid ""
"Make the first and second layer of the model overlap in the Z direction to "
"compensate for the filament lost in the airgap. All models above the first "
"model layer will be shifted down by this amount."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_layers label"
msgid "Raft Top Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_layers description"
msgid ""
"The number of top layers on top of the 2nd raft layer. These are fully "
"filled layers that the model sits on. 2 layers result in a smoother top "
"surface than 1."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_thickness label"
msgid "Raft Top Layer Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_thickness description"
msgid "Layer thickness of the top raft layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_line_width label"
msgid "Raft Top Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_line_width description"
msgid ""
"Width of the lines in the top surface of the raft. These can be thin lines "
"so that the top of the raft becomes smooth."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_line_spacing label"
msgid "Raft Top Spacing"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_line_spacing description"
msgid ""
"The distance between the raft lines for the top raft layers. The spacing "
"should be equal to the line width, so that the surface is solid."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_thickness label"
msgid "Raft Middle Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_thickness description"
msgid "Layer thickness of the middle raft layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_line_width label"
msgid "Raft Middle Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_line_width description"
msgid ""
"Width of the lines in the middle raft layer. Making the second layer extrude "
"more causes the lines to stick to the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_line_spacing label"
msgid "Raft Middle Spacing"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_line_spacing description"
msgid ""
"The distance between the raft lines for the middle raft layer. The spacing "
"of the middle should be quite wide, while being dense enough to support the "
"top raft layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_thickness label"
msgid "Raft Base Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_thickness description"
msgid ""
"Layer thickness of the base raft layer. This should be a thick layer which "
"sticks firmly to the printer build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_line_width label"
msgid "Raft Base Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_line_width description"
msgid ""
"Width of the lines in the base raft layer. These should be thick lines to "
"assist in build plate adhesion."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_line_spacing label"
msgid "Raft Base Line Spacing"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_line_spacing description"
msgid ""
"The distance between the raft lines for the base raft layer. Wide spacing "
"makes for easy removal of the raft from the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_speed label"
msgid "Raft Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_speed description"
msgid "The speed at which the raft is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_speed label"
msgid "Raft Top Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_speed description"
msgid ""
"The speed at which the top raft layers are printed. These should be printed "
"a bit slower, so that the nozzle can slowly smooth out adjacent surface "
"lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_speed label"
msgid "Raft Middle Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_speed description"
msgid ""
"The speed at which the middle raft layer is printed. This should be printed "
"quite slowly, as the volume of material coming out of the nozzle is quite "
"high."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_speed label"
msgid "Raft Base Print Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_speed description"
msgid ""
"The speed at which the base raft layer is printed. This should be printed "
"quite slowly, as the volume of material coming out of the nozzle is quite "
"high."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_acceleration label"
msgid "Raft Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_acceleration description"
msgid "The acceleration with which the raft is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_acceleration label"
msgid "Raft Top Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_acceleration description"
msgid "The acceleration with which the top raft layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_acceleration label"
msgid "Raft Middle Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_acceleration description"
msgid "The acceleration with which the middle raft layer is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_acceleration label"
msgid "Raft Base Print Acceleration"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_acceleration description"
msgid "The acceleration with which the base raft layer is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_jerk label"
msgid "Raft Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_jerk description"
msgid "The jerk with which the raft is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_jerk label"
msgid "Raft Top Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_jerk description"
msgid "The jerk with which the top raft layers are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_jerk label"
msgid "Raft Middle Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_jerk description"
msgid "The jerk with which the middle raft layer is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_jerk label"
msgid "Raft Base Print Jerk"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_jerk description"
msgid "The jerk with which the base raft layer is printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_fan_speed label"
msgid "Raft Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_fan_speed description"
msgid "The fan speed for the raft."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_fan_speed label"
msgid "Raft Top Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_surface_fan_speed description"
msgid "The fan speed for the top raft layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_fan_speed label"
msgid "Raft Middle Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_interface_fan_speed description"
msgid "The fan speed for the middle raft layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_fan_speed label"
msgid "Raft Base Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "raft_base_fan_speed description"
msgid "The fan speed for the base raft layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "dual label"
msgid "Dual Extrusion"
msgstr ""

#: fdmprinter.def.json
msgctxt "dual description"
msgid "Settings used for printing with multiple extruders."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_enable label"
msgid "Enable Prime Tower"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_enable description"
msgid ""
"Print a tower next to the print which serves to prime the material after "
"each nozzle switch."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_size label"
msgid "Prime Tower Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_size description"
msgid "The width of the prime tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_min_volume label"
msgid "Prime Tower Minimum Volume"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_min_volume description"
msgid ""
"The minimum volume for each layer of the prime tower in order to purge "
"enough material."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_position_x label"
msgid "Prime Tower X Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_position_x description"
msgid "The x coordinate of the position of the prime tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_position_y label"
msgid "Prime Tower Y Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_position_y description"
msgid "The y coordinate of the position of the prime tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_wipe_enabled label"
msgid "Wipe Inactive Nozzle on Prime Tower"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_wipe_enabled description"
msgid ""
"After printing the prime tower with one nozzle, wipe the oozed material from "
"the other nozzle off on the prime tower."
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_brim_enable label"
msgid "Prime Tower Brim"
msgstr ""

#: fdmprinter.def.json
msgctxt "prime_tower_brim_enable description"
msgid ""
"Prime-towers might need the extra adhesion afforded by a brim even if the "
"model doesn't. Presently can't be used with the 'Raft' adhesion-type."
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_enabled label"
msgid "Enable Ooze Shield"
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_enabled description"
msgid ""
"Enable exterior ooze shield. This will create a shell around the model which "
"is likely to wipe a second nozzle if it's at the same height as the first "
"nozzle."
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_angle label"
msgid "Ooze Shield Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_angle description"
msgid ""
"The maximum angle a part in the ooze shield will have. With 0 degrees being "
"vertical, and 90 degrees being horizontal. A smaller angle leads to less "
"failed ooze shields, but more material."
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_dist label"
msgid "Ooze Shield Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "ooze_shield_dist description"
msgid "Distance of the ooze shield from the print, in the X/Y directions."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_amount label"
msgid "Nozzle Switch Retraction Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_amount description"
msgid ""
"The amount of retraction when switching extruders. Set to 0 for no "
"retraction at all. This should generally be the same as the length of the "
"heat zone."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_speeds label"
msgid "Nozzle Switch Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_speeds description"
msgid ""
"The speed at which the filament is retracted. A higher retraction speed "
"works better, but a very high retraction speed can lead to filament grinding."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_speed label"
msgid "Nozzle Switch Retract Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_retraction_speed description"
msgid ""
"The speed at which the filament is retracted during a nozzle switch retract."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_prime_speed label"
msgid "Nozzle Switch Prime Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_prime_speed description"
msgid ""
"The speed at which the filament is pushed back after a nozzle switch "
"retraction."
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_extra_prime_amount label"
msgid "Nozzle Switch Extra Prime Amount"
msgstr ""

#: fdmprinter.def.json
msgctxt "switch_extruder_extra_prime_amount description"
msgid "Extra material to prime after nozzle switching."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix label"
msgid "Mesh Fixes"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix description"
msgid "Make the meshes more suited for 3D printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_union_all label"
msgid "Union Overlapping Volumes"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_union_all description"
msgid ""
"Ignore the internal geometry arising from overlapping volumes within a mesh "
"and print the volumes as one. This may cause unintended internal cavities to "
"disappear."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_union_all_remove_holes label"
msgid "Remove All Holes"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_union_all_remove_holes description"
msgid ""
"Remove the holes in each layer and keep only the outside shape. This will "
"ignore any invisible internal geometry. However, it also ignores layer holes "
"which can be viewed from above or below."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_extensive_stitching label"
msgid "Extensive Stitching"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_extensive_stitching description"
msgid ""
"Extensive stitching tries to stitch up open holes in the mesh by closing the "
"hole with touching polygons. This option can introduce a lot of processing "
"time."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_keep_open_polygons label"
msgid "Keep Disconnected Faces"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_keep_open_polygons description"
msgid ""
"Normally Cura tries to stitch up small holes in the mesh and remove parts of "
"a layer with big holes. Enabling this option keeps those parts which cannot "
"be stitched. This option should be used as a last resort option when "
"everything else fails to produce proper g-code."
msgstr ""

#: fdmprinter.def.json
msgctxt "multiple_mesh_overlap label"
msgid "Merged Meshes Overlap"
msgstr ""

#: fdmprinter.def.json
msgctxt "multiple_mesh_overlap description"
msgid ""
"Make meshes which are touching each other overlap a bit. This makes them "
"bond together better."
msgstr ""

#: fdmprinter.def.json
msgctxt "carve_multiple_volumes label"
msgid "Remove Mesh Intersection"
msgstr ""

#: fdmprinter.def.json
msgctxt "carve_multiple_volumes description"
msgid ""
"Remove areas where multiple meshes are overlapping with each other. This may "
"be used if merged dual material objects overlap with each other."
msgstr ""

#: fdmprinter.def.json
msgctxt "alternate_carve_order label"
msgid "Alternate Mesh Removal"
msgstr ""

#: fdmprinter.def.json
msgctxt "alternate_carve_order description"
msgid ""
"Switch to which mesh intersecting volumes will belong with every layer, so "
"that the overlapping meshes become interwoven. Turning this setting off will "
"cause one of the meshes to obtain all of the volume in the overlap, while it "
"is removed from the other meshes."
msgstr ""

#: fdmprinter.def.json
msgctxt "remove_empty_first_layers label"
msgid "Remove Empty First Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "remove_empty_first_layers description"
msgid ""
"Remove empty layers beneath the first printed layer if they are present. "
"Disabling this setting can cause empty first layers if the Slicing Tolerance "
"setting is set to Exclusive or Middle."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_resolution label"
msgid "Maximum Resolution"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_resolution description"
msgid ""
"The minimum size of a line segment after slicing. If you increase this, the "
"mesh will have a lower resolution. This may allow the printer to keep up "
"with the speed it has to process g-code and will increase slice speed by "
"removing details of the mesh that it can't process anyway."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_travel_resolution label"
msgid "Maximum Travel Resolution"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_travel_resolution description"
msgid ""
"The minimum size of a travel line segment after slicing. If you increase "
"this, the travel moves will have less smooth corners. This may allow the "
"printer to keep up with the speed it has to process g-code, but it may cause "
"model avoidance to become less accurate."
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_deviation label"
msgid "Maximum Deviation"
msgstr ""

#: fdmprinter.def.json
msgctxt "meshfix_maximum_deviation description"
msgid ""
"The maximum deviation allowed when reducing the resolution for the Maximum "
"Resolution setting. If you increase this, the print will be less accurate, "
"but the g-code will be smaller. Maximum Deviation is a limit for Maximum "
"Resolution, so if the two conflict the Maximum Deviation will always be held "
"true."
msgstr ""

#: fdmprinter.def.json
msgctxt "blackmagic label"
msgid "Special Modes"
msgstr ""

#: fdmprinter.def.json
msgctxt "blackmagic description"
msgid "Non-traditional ways to print your models."
msgstr ""

#: fdmprinter.def.json
msgctxt "print_sequence label"
msgid "Print Sequence"
msgstr ""

#: fdmprinter.def.json
msgctxt "print_sequence description"
msgid ""
"Whether to print all models one layer at a time or to wait for one model to "
"finish, before moving on to the next. One at a time mode is possible if a) "
"only one extruder is enabled and b) all models are separated in such a way "
"that the whole print head can move in between and all models are lower than "
"the distance between the nozzle and the X/Y axes."
msgstr ""

#: fdmprinter.def.json
msgctxt "print_sequence option all_at_once"
msgid "All at Once"
msgstr ""

#: fdmprinter.def.json
msgctxt "print_sequence option one_at_a_time"
msgid "One at a Time"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_mesh label"
msgid "Infill Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_mesh description"
msgid ""
"Use this mesh to modify the infill of other meshes with which it overlaps. "
"Replaces infill regions of other meshes with regions for this mesh. It's "
"suggested to only print one Wall and no Top/Bottom Skin for this mesh."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_mesh_order label"
msgid "Mesh Processing Rank"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_mesh_order description"
msgid ""
"Determines the priority of this mesh when considering overlapping volumes. "
"Areas where multiple meshes reside will be won by the lower rank mesh. An "
"infill mesh with a higher order will modify the infill of infill meshes with "
"lower order and normal meshes."
msgstr ""

#: fdmprinter.def.json
msgctxt "cutting_mesh label"
msgid "Cutting Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "cutting_mesh description"
msgid ""
"Limit the volume of this mesh to within other meshes. You can use this to "
"make certain areas of one mesh print with different settings and with a "
"whole different extruder."
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_enabled label"
msgid "Mold"
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_enabled description"
msgid ""
"Print models as a mold, which can be cast in order to get a model which "
"resembles the models on the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_width label"
msgid "Minimal Mold Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_width description"
msgid ""
"The minimal distance between the ouside of the mold and the outside of the "
"model."
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_roof_height label"
msgid "Mold Roof Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_roof_height description"
msgid "The height above horizontal parts in your model which to print mold."
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_angle label"
msgid "Mold Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "mold_angle description"
msgid ""
"The angle of overhang of the outer walls created for the mold. 0° will make "
"the outer shell of the mold vertical, while 90° will make the outside of the "
"model follow the contour of the model."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_mesh label"
msgid "Support Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_mesh description"
msgid ""
"Use this mesh to specify support areas. This can be used to generate support "
"structure."
msgstr ""

#: fdmprinter.def.json
msgctxt "anti_overhang_mesh label"
msgid "Anti Overhang Mesh"
msgstr ""

#: fdmprinter.def.json
msgctxt "anti_overhang_mesh description"
msgid ""
"Use this mesh to specify where no part of the model should be detected as "
"overhang. This can be used to remove unwanted support structure."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode label"
msgid "Surface Mode"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode description"
msgid ""
"Treat the model as a surface only, a volume, or volumes with loose surfaces. "
"The normal print mode only prints enclosed volumes. \"Surface\" prints a "
"single wall tracing the mesh surface with no infill and no top/bottom skin. "
"\"Both\" prints enclosed volumes like normal and any remaining polygons as "
"surfaces."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode option normal"
msgid "Normal"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode option surface"
msgid "Surface"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_mesh_surface_mode option both"
msgid "Both"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_spiralize label"
msgid "Spiralize Outer Contour"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_spiralize description"
msgid ""
"Spiralize smooths out the Z move of the outer edge. This will create a "
"steady Z increase over the whole print. This feature turns a solid model "
"into a single walled print with a solid bottom. This feature should only be "
"enabled when each layer only contains a single part."
msgstr ""

#: fdmprinter.def.json
msgctxt "smooth_spiralized_contours label"
msgid "Smooth Spiralized Contours"
msgstr ""

#: fdmprinter.def.json
msgctxt "smooth_spiralized_contours description"
msgid ""
"Smooth the spiralized contours to reduce the visibility of the Z seam (the Z "
"seam should be barely visible on the print but will still be visible in the "
"layer view). Note that smoothing will tend to blur fine surface details."
msgstr ""

#: fdmprinter.def.json
msgctxt "relative_extrusion label"
msgid "Relative Extrusion"
msgstr ""

#: fdmprinter.def.json
msgctxt "relative_extrusion description"
msgid ""
"Use relative extrusion rather than absolute extrusion. Using relative E-"
"steps makes for easier post-processing of the g-code. However, it's not "
"supported by all printers and it may produce very slight deviations in the "
"amount of deposited material compared to absolute E-steps. Irrespective of "
"this setting, the extrusion mode will always be set to absolute before any g-"
"code script is output."
msgstr ""

#: fdmprinter.def.json
msgctxt "experimental label"
msgid "Experimental"
msgstr ""

#: fdmprinter.def.json
msgctxt "experimental description"
msgid "Features that haven't completely been fleshed out yet."
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance label"
msgid "Slicing Tolerance"
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance description"
msgid ""
"Vertical tolerance in the sliced layers. The contours of a layer are "
"normally generated by taking cross sections through the middle of each "
"layer's thickness (Middle). Alternatively each layer can have the areas "
"which fall inside of the volume throughout the entire thickness of the layer "
"(Exclusive) or a layer has the areas which fall inside anywhere within the "
"layer (Inclusive). Inclusive retains the most details, Exclusive makes for "
"the best fit and Middle stays closest to the original surface."
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance option middle"
msgid "Middle"
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance option exclusive"
msgid "Exclusive"
msgstr ""

#: fdmprinter.def.json
msgctxt "slicing_tolerance option inclusive"
msgid "Inclusive"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_line_width label"
msgid "Top Surface Skin Line Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_line_width description"
msgid "Width of a single line of the areas at the top of the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern label"
msgid "Top Surface Skin Pattern"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern description"
msgid "The pattern of the top most layers."
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern option lines"
msgid "Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern option concentric"
msgid "Concentric"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_pattern option zigzag"
msgid "Zig Zag"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_angles label"
msgid "Top Surface Skin Line Directions"
msgstr ""

#: fdmprinter.def.json
msgctxt "roofing_angles description"
msgid ""
"A list of integer line directions to use when the top surface skin layers "
"use the lines or zig zag pattern. Elements from the list are used "
"sequentially as the layers progress and when the end of the list is reached, "
"it starts at the beginning again. The list items are separated by commas and "
"the whole list is contained in square brackets. Default is an empty list "
"which means use the traditional default angles (45 and 135 degrees)."
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_enable_travel_optimization label"
msgid "Infill Travel Optimization"
msgstr ""

#: fdmprinter.def.json
msgctxt "infill_enable_travel_optimization description"
msgid ""
"When enabled, the order in which the infill lines are printed is optimized "
"to reduce the distance travelled. The reduction in travel time achieved very "
"much depends on the model being sliced, infill pattern, density, etc. Note "
"that, for some models that have many small areas of infill, the time to "
"slice the model may be greatly increased."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_dependent_temperature label"
msgid "Auto Temperature"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_dependent_temperature description"
msgid ""
"Change the temperature for each layer automatically with the average flow "
"speed of that layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_temp_graph label"
msgid "Flow Temperature Graph"
msgstr ""

#: fdmprinter.def.json
msgctxt "material_flow_temp_graph description"
msgid ""
"Data linking material flow (in mm3 per second) to temperature (degrees "
"Celsius)."
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_polygon_circumference label"
msgid "Minimum Polygon Circumference"
msgstr ""

#: fdmprinter.def.json
msgctxt "minimum_polygon_circumference description"
msgid ""
"Polygons in sliced layers that have a circumference smaller than this amount "
"will be filtered out. Lower values lead to higher resolution mesh at the "
"cost of slicing time. It is meant mostly for high resolution SLA printers "
"and very tiny 3D models with a lot of details."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_skip_some_zags label"
msgid "Break Up Support In Chunks"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_skip_some_zags description"
msgid ""
"Skip some support line connections to make the support structure easier to "
"break away. This setting is applicable to the Zig Zag support infill pattern."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_skip_zag_per_mm label"
msgid "Support Chunk Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_skip_zag_per_mm description"
msgid ""
"Leave out a connection between support lines once every N millimeter to make "
"the support structure easier to break away."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_zag_skip_count label"
msgid "Support Chunk Line Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_zag_skip_count description"
msgid ""
"Skip one in every N connection lines to make the support structure easier to "
"break away."
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_enabled label"
msgid "Enable Draft Shield"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_enabled description"
msgid ""
"This will create a wall around the model, which traps (hot) air and shields "
"against exterior airflow. Especially useful for materials which warp easily."
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_dist label"
msgid "Draft Shield X/Y Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_dist description"
msgid "Distance of the draft shield from the print, in the X/Y directions."
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height_limitation label"
msgid "Draft Shield Limitation"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height_limitation description"
msgid ""
"Set the height of the draft shield. Choose to print the draft shield at the "
"full height of the model or at a limited height."
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height_limitation option full"
msgid "Full"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height_limitation option limited"
msgid "Limited"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height label"
msgid "Draft Shield Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "draft_shield_height description"
msgid ""
"Height limitation of the draft shield. Above this height no draft shield "
"will be printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_enabled label"
msgid "Make Overhang Printable"
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_enabled description"
msgid ""
"Change the geometry of the printed model such that minimal support is "
"required. Steep overhangs will become shallow overhangs. Overhanging areas "
"will drop down to become more vertical."
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_angle label"
msgid "Maximum Model Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "conical_overhang_angle description"
msgid ""
"The maximum angle of overhangs after the they have been made printable. At a "
"value of 0° all overhangs are replaced by a piece of model connected to the "
"build plate, 90° will not change the model in any way."
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_enable label"
msgid "Enable Coasting"
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_enable description"
msgid ""
"Coasting replaces the last part of an extrusion path with a travel path. The "
"oozed material is used to print the last piece of the extrusion path in "
"order to reduce stringing."
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_volume label"
msgid "Coasting Volume"
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_volume description"
msgid ""
"The volume otherwise oozed. This value should generally be close to the "
"nozzle diameter cubed."
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_min_volume label"
msgid "Minimum Volume Before Coasting"
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_min_volume description"
msgid ""
"The smallest volume an extrusion path should have before allowing coasting. "
"For smaller extrusion paths, less pressure has been built up in the bowden "
"tube and so the coasted volume is scaled linearly. This value should always "
"be larger than the Coasting Volume."
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_speed label"
msgid "Coasting Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "coasting_speed description"
msgid ""
"The speed by which to move during coasting, relative to the speed of the "
"extrusion path. A value slightly under 100% is advised, since during the "
"coasting move the pressure in the bowden tube drops."
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_infill_pocket_size label"
msgid "Cross 3D Pocket Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_infill_pocket_size description"
msgid ""
"The size of pockets at four-way crossings in the cross 3D pattern at heights "
"where the pattern is touching itself."
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_infill_density_image label"
msgid "Cross Infill Density Image"
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_infill_density_image description"
msgid ""
"The file location of an image of which the brightness values determine the "
"minimal density at the corresponding location in the infill of the print."
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_support_density_image label"
msgid "Cross Fill Density Image for Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "cross_support_density_image description"
msgid ""
"The file location of an image of which the brightness values determine the "
"minimal density at the corresponding location in the support."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_enabled label"
msgid "Enable Conical Support"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_enabled description"
msgid "Make support areas smaller at the bottom than at the overhang."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_angle label"
msgid "Conical Support Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_angle description"
msgid ""
"The angle of the tilt of conical support. With 0 degrees being vertical, and "
"90 degrees being horizontal. Smaller angles cause the support to be more "
"sturdy, but consist of more material. Negative angles cause the base of the "
"support to be wider than the top."
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_min_width label"
msgid "Conical Support Minimum Width"
msgstr ""

#: fdmprinter.def.json
msgctxt "support_conical_min_width description"
msgid ""
"Minimum width to which the base of the conical support area is reduced. "
"Small widths can lead to unstable support structures."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_enabled label"
msgid "Fuzzy Skin"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_enabled description"
msgid ""
"Randomly jitter while printing the outer wall, so that the surface has a "
"rough and fuzzy look."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_outside_only label"
msgid "Fuzzy Skin Outside Only"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_outside_only description"
msgid "Jitter only the parts' outlines and not the parts' holes."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_thickness label"
msgid "Fuzzy Skin Thickness"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_thickness description"
msgid ""
"The width within which to jitter. It's advised to keep this below the outer "
"wall width, since the inner walls are unaltered."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_point_density label"
msgid "Fuzzy Skin Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_point_density description"
msgid ""
"The average density of points introduced on each polygon in a layer. Note "
"that the original points of the polygon are discarded, so a low density "
"results in a reduction of the resolution."
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_point_dist label"
msgid "Fuzzy Skin Point Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "magic_fuzzy_skin_point_dist description"
msgid ""
"The average distance between the random points introduced on each line "
"segment. Note that the original points of the polygon are discarded, so a "
"high smoothness results in a reduction of the resolution. This value must be "
"higher than half the Fuzzy Skin Thickness."
msgstr ""

#: fdmprinter.def.json
msgctxt "flow_rate_max_extrusion_offset label"
msgid "Flow Rate Compensation Max Extrusion Offset"
msgstr ""

#: fdmprinter.def.json
msgctxt "flow_rate_max_extrusion_offset description"
msgid ""
"The maximum distance in mm to move the filament to compensate for changes in "
"flow rate."
msgstr ""

#: fdmprinter.def.json
msgctxt "flow_rate_extrusion_offset_factor label"
msgid "Flow Rate Compensation Factor"
msgstr ""

#: fdmprinter.def.json
msgctxt "flow_rate_extrusion_offset_factor description"
msgid ""
"How far to move the filament in order to compensate for changes in flow "
"rate, as a percentage of how far the filament would move in one second of "
"extrusion."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_enabled label"
msgid "Wire Printing"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_enabled description"
msgid ""
"Print only the outside surface with a sparse webbed structure, printing 'in "
"thin air'. This is realized by horizontally printing the contours of the "
"model at given Z intervals which are connected via upward and diagonally "
"downward lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_height label"
msgid "WP Connection Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_height description"
msgid ""
"The height of the upward and diagonally downward lines between two "
"horizontal parts. This determines the overall density of the net structure. "
"Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_inset label"
msgid "WP Roof Inset Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_inset description"
msgid ""
"The distance covered when making a connection from a roof outline inward. "
"Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed label"
msgid "WP Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed description"
msgid ""
"Speed at which the nozzle moves when extruding material. Only applies to "
"Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_bottom label"
msgid "WP Bottom Printing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_bottom description"
msgid ""
"Speed of printing the first layer, which is the only layer touching the "
"build platform. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_up label"
msgid "WP Upward Printing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_up description"
msgid ""
"Speed of printing a line upward 'in thin air'. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_down label"
msgid "WP Downward Printing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_down description"
msgid ""
"Speed of printing a line diagonally downward. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_flat label"
msgid "WP Horizontal Printing Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_printspeed_flat description"
msgid ""
"Speed of printing the horizontal contours of the model. Only applies to Wire "
"Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow label"
msgid "WP Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow description"
msgid ""
"Flow compensation: the amount of material extruded is multiplied by this "
"value. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow_connection label"
msgid "WP Connection Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow_connection description"
msgid "Flow compensation when going up or down. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow_flat label"
msgid "WP Flat Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flow_flat description"
msgid ""
"Flow compensation when printing flat lines. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_top_delay label"
msgid "WP Top Delay"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_top_delay description"
msgid ""
"Delay time after an upward move, so that the upward line can harden. Only "
"applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_bottom_delay label"
msgid "WP Bottom Delay"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_bottom_delay description"
msgid "Delay time after a downward move. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flat_delay label"
msgid "WP Flat Delay"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_flat_delay description"
msgid ""
"Delay time between two horizontal segments. Introducing such a delay can "
"cause better adhesion to previous layers at the connection points, while too "
"long delays cause sagging. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_up_half_speed label"
msgid "WP Ease Upward"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_up_half_speed description"
msgid ""
"Distance of an upward move which is extruded with half speed.\n"
"This can cause better adhesion to previous layers, while not heating the "
"material in those layers too much. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_top_jump label"
msgid "WP Knot Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_top_jump description"
msgid ""
"Creates a small knot at the top of an upward line, so that the consecutive "
"horizontal layer has a better chance to connect to it. Only applies to Wire "
"Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_fall_down label"
msgid "WP Fall Down"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_fall_down description"
msgid ""
"Distance with which the material falls down after an upward extrusion. This "
"distance is compensated for. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_drag_along label"
msgid "WP Drag Along"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_drag_along description"
msgid ""
"Distance with which the material of an upward extrusion is dragged along "
"with the diagonally downward extrusion. This distance is compensated for. "
"Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy label"
msgid "WP Strategy"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy description"
msgid ""
"Strategy for making sure two consecutive layers connect at each connection "
"point. Retraction lets the upward lines harden in the right position, but "
"may cause filament grinding. A knot can be made at the end of an upward line "
"to heighten the chance of connecting to it and to let the line cool; "
"however, it may require slow printing speeds. Another strategy is to "
"compensate for the sagging of the top of an upward line; however, the lines "
"won't always fall down as predicted."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy option compensate"
msgid "Compensate"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy option knot"
msgid "Knot"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_strategy option retract"
msgid "Retract"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_straight_before_down label"
msgid "WP Straighten Downward Lines"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_straight_before_down description"
msgid ""
"Percentage of a diagonally downward line which is covered by a horizontal "
"line piece. This can prevent sagging of the top most point of upward lines. "
"Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_fall_down label"
msgid "WP Roof Fall Down"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_fall_down description"
msgid ""
"The distance which horizontal roof lines printed 'in thin air' fall down "
"when being printed. This distance is compensated for. Only applies to Wire "
"Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_drag_along label"
msgid "WP Roof Drag Along"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_drag_along description"
msgid ""
"The distance of the end piece of an inward line which gets dragged along "
"when going back to the outer outline of the roof. This distance is "
"compensated for. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_outer_delay label"
msgid "WP Roof Outer Delay"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_roof_outer_delay description"
msgid ""
"Time spent at the outer perimeters of hole which is to become a roof. Longer "
"times can ensure a better connection. Only applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_nozzle_clearance label"
msgid "WP Nozzle Clearance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wireframe_nozzle_clearance description"
msgid ""
"Distance between the nozzle and horizontally downward lines. Larger "
"clearance results in diagonally downward lines with a less steep angle, "
"which in turn results in less upward connections with the next layer. Only "
"applies to Wire Printing."
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_enabled label"
msgid "Use Adaptive Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_enabled description"
msgid ""
"Adaptive layers computes the layer heights depending on the shape of the "
"model."
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_variation label"
msgid "Adaptive Layers Maximum Variation"
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_variation description"
msgid "The maximum allowed height different from the base layer height."
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_variation_step label"
msgid "Adaptive Layers Variation Step Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_variation_step description"
msgid ""
"The difference in height of the next layer height compared to the previous "
"one."
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_threshold label"
msgid "Adaptive Layers Topography Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "adaptive_layer_height_threshold description"
msgid ""
"Target horizontal distance between two adjacent layers. Reducing this "
"setting causes thinner layers to be used to bring the edges of the layers "
"closer together."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_overhang_angle label"
msgid "Overhanging Wall Angle"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_overhang_angle description"
msgid ""
"Walls that overhang more than this angle will be printed using overhanging "
"wall settings. When the value is 90, no walls will be treated as "
"overhanging. Overhang that gets supported by support will not be treated as "
"overhang either."
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_overhang_speed_factor label"
msgid "Overhanging Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wall_overhang_speed_factor description"
msgid ""
"Overhanging walls will be printed at this percentage of their normal print "
"speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_settings_enabled label"
msgid "Enable Bridge Settings"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_settings_enabled description"
msgid ""
"Detect bridges and modify print speed, flow and fan settings while bridges "
"are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_min_length label"
msgid "Minimum Bridge Wall Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_min_length description"
msgid ""
"Unsupported walls shorter than this will be printed using the normal wall "
"settings. Longer unsupported walls will be printed using the bridge wall "
"settings."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_support_threshold label"
msgid "Bridge Skin Support Threshold"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_support_threshold description"
msgid ""
"If a skin region is supported for less than this percentage of its area, "
"print it using the bridge settings. Otherwise it is printed using the normal "
"skin settings."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_sparse_infill_max_density label"
msgid "Bridge Sparse Infill Max Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_sparse_infill_max_density description"
msgid ""
"Maximum density of infill considered to be sparse. Skin over sparse infill "
"is considered to be unsupported and so may be treated as a bridge skin."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_coast label"
msgid "Bridge Wall Coasting"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_coast description"
msgid ""
"This controls the distance the extruder should coast immediately before a "
"bridge wall begins. Coasting before the bridge starts can reduce the "
"pressure in the nozzle and may produce a flatter bridge."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_speed label"
msgid "Bridge Wall Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_speed description"
msgid "The speed at which the bridge walls are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_material_flow label"
msgid "Bridge Wall Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_wall_material_flow description"
msgid ""
"When printing bridge walls, the amount of material extruded is multiplied by "
"this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed label"
msgid "Bridge Skin Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed description"
msgid "The speed at which bridge skin regions are printed."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow label"
msgid "Bridge Skin Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid ""
"When printing bridge skin regions, the amount of material extruded is "
"multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density label"
msgid "Bridge Skin Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density description"
msgid ""
"The density of the bridge skin layer. Values less than 100 will increase the "
"gaps between the skin lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed label"
msgid "Bridge Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed description"
msgid "Percentage fan speed to use when printing bridge walls and skin."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_enable_more_layers label"
msgid "Bridge Has Multiple Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_enable_more_layers description"
msgid ""
"If enabled, the second and third layers above the air are printed using the "
"following settings. Otherwise, those layers are printed using the normal "
"settings."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed_2 label"
msgid "Bridge Second Skin Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed_2 description"
msgid "Print speed to use when printing the second bridge skin layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow_2 label"
msgid "Bridge Second Skin Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow_2 description"
msgid ""
"When printing the second bridge skin layer, the amount of material extruded "
"is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density_2 label"
msgid "Bridge Second Skin Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density_2 description"
msgid ""
"The density of the second bridge skin layer. Values less than 100 will "
"increase the gaps between the skin lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed_2 label"
msgid "Bridge Second Skin Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed_2 description"
msgid "Percentage fan speed to use when printing the second bridge skin layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed_3 label"
msgid "Bridge Third Skin Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_speed_3 description"
msgid "Print speed to use when printing the third bridge skin layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow_3 label"
msgid "Bridge Third Skin Flow"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow_3 description"
msgid ""
"When printing the third bridge skin layer, the amount of material extruded "
"is multiplied by this value."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density_3 label"
msgid "Bridge Third Skin Density"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_skin_density_3 description"
msgid ""
"The density of the third bridge skin layer. Values less than 100 will "
"increase the gaps between the skin lines."
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed_3 label"
msgid "Bridge Third Skin Fan Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "bridge_fan_speed_3 description"
msgid "Percentage fan speed to use when printing the third bridge skin layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "clean_between_layers label"
msgid "Wipe Nozzle Between Layers"
msgstr ""

#: fdmprinter.def.json
msgctxt "clean_between_layers description"
msgid ""
"Whether to include nozzle wipe G-Code between layers (maximum 1 per layer). "
"Enabling this setting could influence behavior of retract at layer change. "
"Please use Wipe Retraction settings to control retraction at layers where "
"the wipe script will be working."
msgstr ""

#: fdmprinter.def.json
msgctxt "max_extrusion_before_wipe label"
msgid "Material Volume Between Wipes"
msgstr ""

#: fdmprinter.def.json
msgctxt "max_extrusion_before_wipe description"
msgid ""
"Maximum material that can be extruded before another nozzle wipe is "
"initiated. If this value is less than the volume of material required in a "
"layer, the setting has no effect in this layer, i.e. it is limited to one "
"wipe per layer."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_enable label"
msgid "Wipe Retraction Enable"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_enable description"
msgid "Retract the filament when the nozzle is moving over a non-printed area."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_amount label"
msgid "Wipe Retraction Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_amount description"
msgid ""
"Amount to retract the filament so it does not ooze during the wipe sequence."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_extra_prime_amount label"
msgid "Wipe Retraction Extra Prime Amount"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_extra_prime_amount description"
msgid ""
"Some material can ooze away during a wipe travel moves, which can be "
"compensated for here."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_speed label"
msgid "Wipe Retraction Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_speed description"
msgid ""
"The speed at which the filament is retracted and primed during a wipe "
"retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_retract_speed label"
msgid "Wipe Retraction Retract Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_retract_speed description"
msgid ""
"The speed at which the filament is retracted during a wipe retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_prime_speed label"
msgid "Wipe Retraction Prime Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_retraction_prime_speed description"
msgid ""
"The speed at which the filament is primed during a wipe retraction move."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_pause label"
msgid "Wipe Pause"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_pause description"
msgid "Pause after the unretract."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_enable label"
msgid "Wipe Z Hop"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_enable description"
msgid ""
"When wiping, the build plate is lowered to create clearance between the "
"nozzle and the print. It prevents the nozzle from hitting the print during "
"travel moves, reducing the chance to knock the print from the build plate."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_amount label"
msgid "Wipe Z Hop Height"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_amount description"
msgid "The height difference when performing a Z Hop."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_speed label"
msgid "Wipe Hop Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_hop_speed description"
msgid "Speed to move the z-axis during the hop."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_brush_pos_x label"
msgid "Wipe Brush X Position"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_brush_pos_x description"
msgid "X location where wipe script will start."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_repeat_count label"
msgid "Wipe Repeat Count"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_repeat_count description"
msgid "Number of times to move the nozzle across the brush."
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_move_distance label"
msgid "Wipe Move Distance"
msgstr ""

#: fdmprinter.def.json
msgctxt "wipe_move_distance description"
msgid "The distance to move the head back and forth across the brush."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_hole_max_size label"
msgid "Small Hole Max Size"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid ""
"Holes and part outlines with a diameter smaller than this will be printed "
"using Small Feature Speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_max_length label"
msgid "Small Feature Max Length"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_max_length description"
msgid ""
"Feature outlines that are shorter than this length will be printed using "
"Small Feature Speed."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_speed_factor label"
msgid "Small Feature Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_speed_factor description"
msgid ""
"Small features will be printed at this percentage of their normal print "
"speed. Slower printing can help with adhesion and accuracy."
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_speed_factor_0 label"
msgid "Small Feature Initial Layer Speed"
msgstr ""

#: fdmprinter.def.json
msgctxt "small_feature_speed_factor_0 description"
msgid ""
"Small features on the first layer will be printed at this percentage of "
"their normal print speed. Slower printing can help with adhesion and "
"accuracy."
msgstr ""

#: fdmprinter.def.json
msgctxt "command_line_settings label"
msgid "Command Line Settings"
msgstr ""

#: fdmprinter.def.json
msgctxt "command_line_settings description"
msgid ""
"Settings which are only used if CuraEngine isn't called from the Cura "
"frontend."
msgstr ""

#: fdmprinter.def.json
msgctxt "center_object label"
msgid "Center Object"
msgstr ""

#: fdmprinter.def.json
msgctxt "center_object description"
msgid ""
"Whether to center the object on the middle of the build platform (0,0), "
"instead of using the coordinate system in which the object was saved."
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_x label"
msgid "Mesh Position X"
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_x description"
msgid "Offset applied to the object in the x direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_y label"
msgid "Mesh Position Y"
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_y description"
msgid "Offset applied to the object in the y direction."
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_z label"
msgid "Mesh Position Z"
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_position_z description"
msgid ""
"Offset applied to the object in the z direction. With this you can perform "
"what was used to be called 'Object Sink'."
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_rotation_matrix label"
msgid "Mesh Rotation Matrix"
msgstr ""

#: fdmprinter.def.json
msgctxt "mesh_rotation_matrix description"
msgid ""
"Transformation matrix to be applied to the model when loading it from file."
msgstr ""