um_s5_cc0.6_PLA_Draft_Print.inst.cfg 1.4 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243
  1. [general]
  2. version = 4
  3. name = Fast
  4. definition = ultimaker_s5
  5. [metadata]
  6. setting_version = 17
  7. type = quality
  8. quality_type = draft
  9. weight = -3
  10. material = generic_pla
  11. variant = CC 0.6
  12. is_experimental = True
  13. [values]
  14. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  15. cool_fan_speed_max = =100
  16. cool_min_speed = 2
  17. gradual_infill_step_height = =3 * layer_height
  18. infill_line_width = =round(line_width * 0.65 / 0.75, 2)
  19. infill_pattern = triangles
  20. line_width = =machine_nozzle_size * 0.9375
  21. machine_nozzle_cool_down_speed = 0.75
  22. machine_nozzle_heat_up_speed = 1.6
  23. material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
  24. material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
  25. material_print_temperature = =default_material_print_temperature + 10
  26. material_standby_temperature = 100
  27. prime_tower_enable = True
  28. retract_at_layer_change = False
  29. speed_print = 45
  30. speed_topbottom = =math.ceil(speed_print * 35 / 45)
  31. speed_wall = =math.ceil(speed_print * 40 / 45)
  32. speed_wall_x = =speed_wall
  33. speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
  34. support_angle = 70
  35. support_line_width = =line_width * 0.75
  36. support_pattern = ='triangles'
  37. support_xy_distance = =wall_line_width_0 * 1.5
  38. top_bottom_thickness = =layer_height * 4
  39. wall_line_width = =round(line_width * 0.75 / 0.75, 2)
  40. wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
  41. wall_thickness = =wall_line_width_0 + wall_line_width_x