um_s5_aa0.8_TPLA_Draft_Print.inst.cfg 1.3 KB

12345678910111213141516171819202122232425262728293031323334353637383940
  1. [general]
  2. version = 4
  3. name = Fast
  4. definition = ultimaker_s5
  5. [metadata]
  6. setting_version = 17
  7. type = quality
  8. quality_type = draft
  9. weight = -2
  10. material = generic_tough_pla
  11. variant = AA 0.8
  12. [values]
  13. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  14. cool_fan_speed_max = =100
  15. cool_min_speed = 2
  16. gradual_infill_step_height = =3 * layer_height
  17. infill_line_width = =round(line_width * 0.75 / 0.75, 2)
  18. infill_pattern = cubic
  19. layer_height_0 = 0.4
  20. line_width = =machine_nozzle_size * 0.9375
  21. machine_nozzle_cool_down_speed = 0.75
  22. machine_nozzle_heat_up_speed = 1.6
  23. material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
  24. material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
  25. material_print_temperature = =default_material_print_temperature + 0
  26. prime_tower_enable = False
  27. retract_at_layer_change = False
  28. speed_print = 45
  29. speed_topbottom = =round(speed_print * 35 / 45)
  30. speed_wall = =round(speed_print * 40 / 45)
  31. speed_wall_0 = =round(speed_print * 35 / 45)
  32. support_angle = 70
  33. support_line_width = =line_width * 0.75
  34. support_xy_distance = =wall_line_width_0 * 1.5
  35. top_bottom_thickness = =layer_height * 6
  36. wall_line_width = =round(line_width * 0.75 / 0.75, 2)
  37. wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2)
  38. wall_thickness = =wall_line_width_0 + wall_line_width_x