Cura/resources/quality/twotrees/petg/two_trees_0.4_PETG_standard.inst.cfg

[general]
version = 4
name = Standard Quality
definition = two_trees_base

[metadata]
setting_version = 17
type = quality
quality_type = standard
material = generic_petg
variant = 0.4mm Nozzle

[values]
material_bed_temperature = 80
material_print_temperature_layer_0 = 225
material_print_temperature = 220
material_standby_temperature = =material_print_temperature
material_initial_print_temperature= =material_print_temperature
material_final_print_temperature= =material_print_temperature
cool_fan_enabled = True
retraction_hop = 0.3
retraction_hop_only_when_collides = True
#retraction_extra_prime_amount = 0.5