Cura/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg

[general]
version = 4
name = Extra Fine Quality
definition = goofoo_open

[metadata]
setting_version = 17
type = quality
quality_type = efine
material = goofoo_pva
variant = 0.4mm Nozzle

[values]
wall_thickness = =line_width*2
adhesion_type = none
support_pattern = grid
support_infill_rate = 50
support_brim_enable = True
support_interface_enable = True
support_enable = True
material_bed_temperature = 70