Cura/resources/definitions/rigid3d.def.json

{
    "name": "Rigid3D 2. Nesil",
    "version": 2,
    "inherits": "rigid3d_base",
    "metadata": {
		"visible": true,
		"quality_definition": "rigid3d_base",	

		"preferred_quality_type": "standard"		
    },
    "overrides": {
        "machine_name": { "default_value": "Rigid3D 2. Nesil" },

		"machine_heated_bed": { "default_value": true },
		
		"machine_width": { "default_value": 250 },
        "machine_depth": { "default_value": 250 },
        "machine_height": { "default_value": 210 },
		
		"machine_center_is_zero": { "default_value": false },
		
		"machine_start_gcode": {"default_value": "  ; -- START GCODE --\n  G21\n  G28 ; Home extruder\n  G29 ; Autolevel bed\n  M107 ; Turn off fan\n  G90 ; Absolute positioning\n  M82 ; Extruder in absolute mode\n  G92 E0 ; Reset extruder position\n  ; -- end of START GCODE --\n\n"},
        "machine_end_gcode": {"default_value": "  ; -- END GCODE --\n  G1 X0 Y230 ; Get extruder out of way.\n  M107 ; Turn off fan\n  G91 ; Relative positioning\n  G0 Z20 ; Lift extruder up\n  T0\n  G1 E-1 ; Reduce filament pressure\n  M104 T0 S0 ; Turn ectruder heater off\n  G90 ; Absolute positioning\n  G92 E0 ; Reset extruder position\n  M140 S0 ; Disable heated bed\n  M84 ; Turn steppers off\n  ; -- end of END GCODE --\n"},
		
		"machine_head_with_fans_polygon": { 
            "default_value": [
                 [ -22, -67], [ -22, 51], [ 36, -67], [ 36, 51]
				 ] 
        },

        "gantry_height": { "value": 20 }
    }
}