| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758 |
- {
- "name": "MBot3D Grid 2+ Dual",
- "version": 2,
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Magicfirm",
- "manufacturer": "Magicfirm",
- "file_formats": "application/x3g",
- "machine_x3g_variant": "z",
- "machine_extruder_trains":
- {
- "0": "mbot3d_grid2_extruder_left",
- "1": "mbot3d_grid2_extruder_right"
- }
- },
- "overrides": {
- "machine_name": { "default_value": "MBot3D Grid 2+ Dual" },
- "machine_start_gcode": {
- "default_value": "M136\nG162 X Y F2000\nG161 Z F900\nG92 X0 Y0 Z-5 A0 B0\nG1 Z0.0 F900\nG161 Z F100\nM132 X Y Z A B\nG1 X125 Y115 Z10 F450\nG1 X0 Y115 Z10 F2000.0\nM133 T0\nG1 X20 Y115 Z0.5 F800\nG1 X0 Y115 Z0.5 F600 A12\nG92 A0\n"
- },
- "machine_end_gcode": {
- "default_value": "M18 A B(Turn off A and B steppers)\nG1 Z190 F900\nG162 X Y F2000\nM18 X Y Z(Turn off steppers after a build)\nM104 S0 T0\nM72 P1 ( Play Ta-Da song )\nM73 P100 (end build progress )\nM137 (build end)\n"
- },
- "machine_width": { "default_value": 235 },
- "machine_depth": { "default_value": 210 },
- "machine_height": { "default_value": 190 },
- "machine_extruder_count": { "default_value": 2 },
- "machine_center_is_zero": { "default_value": true },
- "machine_gcode_flavor": { "default_value": "Makerbot" },
- "machine_head_with_fans_polygon": { "default_value": [ [ -37, 50 ], [ 25, 50 ], [ 25, -40 ], [ -37, -40 ] ] },
- "gantry_height": { "value": 10 },
- "machine_steps_per_mm_x": { "default_value": 88.888889 },
- "machine_steps_per_mm_y": { "default_value": 88.888889 },
- "machine_steps_per_mm_z": { "default_value": 400 },
- "machine_steps_per_mm_e": { "default_value": 96.27520187033366 },
- "retraction_amount": { "default_value": 0.7 },
- "retraction_speed": { "default_value": 15 },
- "speed_print": { "default_value": 50 },
- "speed_wall": { "value": 25 },
- "speed_wall_x": { "value": 35 },
- "speed_travel": { "value": 80 },
- "speed_layer_0": { "value": 15 },
- "support_interface_enable": { "default_value": true },
- "support_interface_height": { "default_value": 0.8 },
- "support_interface_density": { "default_value": 80 },
- "support_interface_pattern": { "default_value": "grid" },
- "infill_overlap": { "value": "12 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0" },
- "retract_at_layer_change": { "default_value": true },
- "travel_retract_before_outer_wall": { "default_value": true },
- "material_initial_print_temperature": { "value": "material_print_temperature" },
- "material_final_print_temperature": { "value": "material_print_temperature" },
- "travel_avoid_other_parts": { "default_value": false },
- "raft_airgap": { "default_value": 0.15 },
- "raft_margin": { "default_value": 6 }
- }
- }
|
