| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758 |
- {
- "name": "Alfawise U30",
- "version": 2,
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Nicolas Nussbaum",
- "manufacturer": "Alfawise",
- "file_formats": "text/x-gcode",
- "preferred_quality_type": "fast",
- "machine_extruder_trains":
- {
- "0": "alfawise_u30_extruder_0"
- }
- },
- "overrides": {
- "machine_name": { "default_value": "Alfawise U30" },
- "machine_start_gcode": {
- "default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z1 F1000 ;move up slightly\nG1 Y60.0 Z0 E9.0 F1000.0;intro line\nG1 Y100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\nG1 F80\n;Put printing message on LCD screen\nM117 Printing...\n; -- end of START GCODE --"
- },
- "machine_end_gcode": {
- "default_value": "; -- END GCODE --\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F80 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ;turn the fan off; -- end of END GCODE --"
- },
- "material_diameter": { "default_value": 1.75 },
- "layer_height_0": { "default_value": 0.2 },
- "wall_thickness": { "value": "1.2" },
- "speed_print": { "default_value": 40 },
- "support_enable": { "default_value": true },
- "retraction_enable": { "default_value": true },
- "retraction_amount": { "default_value": 5 },
- "retraction_speed": { "default_value": 45 },
- "gantry_height": { "value": "25" },
- "machine_width": { "default_value": 220 },
- "machine_height": { "default_value": 250 },
- "machine_depth": { "default_value": 220 },
- "machine_center_is_zero": { "default_value": false },
- "machine_heated_bed": { "default_value": true },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_max_feedrate_x": { "default_value": 200 },
- "machine_max_feedrate_y": { "default_value": 200 },
- "machine_max_feedrate_z": { "default_value": 5 },
- "machine_max_feedrate_e": { "default_value": 100 },
- "machine_max_acceleration_x": { "default_value": 500 },
- "machine_max_acceleration_y": { "default_value": 500 },
- "machine_max_acceleration_z": { "default_value": 10 },
- "machine_max_acceleration_e": { "default_value": 3000 },
- "machine_acceleration": { "default_value": 300 },
- "machine_max_jerk_xy": { "default_value": 20.0 },
- "machine_max_jerk_z": { "default_value": 0.4 },
- "machine_max_jerk_e": { "default_value": 5.0 },
- "machine_steps_per_mm_x": { "default_value": 80 },
- "machine_steps_per_mm_y": { "default_value": 80 },
- "machine_steps_per_mm_z": { "default_value": 400 },
- "machine_steps_per_mm_e": { "default_value": 93 },
- "skirt_line_count": { "default_value": 1 },
- "skirt_brim_minimal_length": { "default_value": 250 }
- }
- }
|
