Cura/resources/extruders/zav_extruder_2.def.json

{
    "version": 2,
    "name": "Extruder 2",
    "inherits": "fdmextruder",
    "metadata":
    {
        "machine": "zav_base",
        "position": "1"
    },
    "overrides":
    {
        "extruder_nr": { "default_value": 1 },
        "machine_extruder_end_code": { "default_value": ";---- Starting End G-code Extruder 2 ----\nG92 E0                       ;reset extruder distance\nG1 F800 E-5               ;short retract\nG1 F2400 X5 Y5         ;move near prime tower\nG1 F2000 E-93           ;long retract for filament removal\nG92 E0                       ;reset extruder distance\nG90                            ;absolute coordinate\n;---- Ending End G-code Extruder 2 ----" },
        "machine_extruder_start_code": { "default_value": ";---- Starting Start G-code Extruder 2 ----\nT1                             ;switch to extruder 2\nG92 E0                      ;reset extruder distance\nG1 F2000 E93           ;load filament\nG92 E0                      ;reset extruder distance\nM104 S{material_print_temperature}\n;---- Ending Start G-code Extruder 2 ----" },
        "machine_nozzle_offset_x": { "default_value": 17.7 },
        "machine_nozzle_offset_y": { "default_value": 0.0 },
        "machine_nozzle_size": { "default_value": 0.4 },
        "material_diameter": { "default_value": 1.75 }
    }
}