Cura/resources/definitions/zav_base.def.json

{
    "version": 2,
    "name": "Zav Base Printer",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": false,
        "author": "Kirill Nikolaev, Kim Evgeniy (C)",
        "manufacturer": "Zav Co., Ltd.",
        "file_formats": "text/x-gcode",
        "exclude_materials": [
            "dsm_arnitel2045",
            "dsm_novamid1070",
            "imade3d_petg",
            "imade3d_pla",
            "innofill_innoflex60"
        ],
        "first_start_actions": [ "MachineSettingsAction" ],
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains":
        {
            "0": "zav_extruder_1",
            "1": "zav_extruder_2"
        },
        "preferred_material": "bestfilament_abs_skyblue",
        "preferred_quality_type": "ZAV_layer_020",
        "preferred_variant_name": "0.40mm_ZAV_Nozzle",
        "variants_name": "Nozzle Size"
    },
    "overrides":
    {
        "adhesion_type": { "value": "'brim'" },
        "bottom_thickness": { "value": "layer_height*3 if layer_height > 0.15 else 0.8" },
        "bridge_settings_enabled": { "value": "True" },
        "brim_width": { "value": "5" },
        "cool_fan_full_at_height": { "value": "layer_height*2" },
        "cool_lift_head": { "value": "True" },
        "cool_min_layer_time": { "value": "15" },
        "cool_min_layer_time_fan_speed_max": { "value": "20" },
        "cool_min_speed": { "value": "15" },
        "expand_skins_expand_distance": { "value": "3" },
        "gantry_height": { "value": 999999 },
        "infill_before_walls": { "value": "False" },
        "infill_enable_travel_optimization": { "value": "True" },
        "infill_line_width": { "value": "round(line_width * 1.1, 2)" },
        "infill_pattern": { "value": "'gyroid'" },
        "initial_layer_line_width_factor": { "value": "100" },
        "layer_height_0": { "value": "layer_height" },
        "line_width": { "value": "machine_nozzle_size" },
        "machine_buildplate_type": { "value": "glass" },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 200 },
        "machine_end_gcode": { "default_value": ";---- Ending Script Start ----\nM104 S0                                        ;extruder heater off\nM140 S0                                        ;heated bed heater off (if you have it)\nG91                                               ;relative positioning\nG1 E-4 F300                                  ;retract the filament a bit before lifting the nozzle to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F5000    ;move Z up a bit and retract filament even more\nG28 Z0                                          ;move bed down\nG28 X0 Y0                                     ;move X/Y to min endstops so the head is out of the way\nM84                                              ;steppers off\nG90                                              ;absolute positioning\nM107                                            ;switch off cooling fan\nM355 S0 P0                                  ;switch off case light\n;---- Ending Script End ----\n" },
        "machine_extruder_count": { "value": 1 },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-26, 41],
                [-26, -21],
                [36, -21],
                [36, 41]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 270 },
        "machine_name": { "default_value": "ZAV Base Printer" },
        "machine_shape": { "default_value": "rectangular" },
        "machine_start_gcode": { "default_value": ";---- Starting Script Start ----\nG90                     ;absolute positioning\nM82                     ;set extruder to absolute mode\nM107                   ;start with the fan off\nG28 Z0                ;move Z to min endstops\nG28 X0 Y0           ;move X/Y to min endstops\nG92 E0                ;zero the extruded length\nG1  F5000           ;set speed\nG1 Y40                ;move to start position Y\nM117 Printing...\n;---- Starting Script End ----\n" },
        "machine_width": { "default_value": 300 },
        "material_diameter": { "default_value": 1.75 },
        "optimize_wall_printing_order": { "value": "True" },
        "retraction_amount": { "value": "4" },
        "retraction_combing": { "value": "'all'" },
        "retraction_combing_max_distance": { "value": "10" },
        "retraction_min_travel": { "value": "3" },
        "skin_line_width": { "value": "round(line_width * 1.0, 2)" },
        "skin_outline_count": { "value": "0" },
        "skirt_brim_line_width": { "value": "round(line_width * 1.1, 2)" },
        "speed_layer_0": { "value": "25" },
        "speed_print": { "value": "80" },
        "speed_topbottom": { "value": "50" },
        "speed_travel_layer_0": { "value": "40" },
        "support_angle": { "value": "65" },
        "support_brim_enable": { "value": "True" },
        "support_enable": { "value": "True" },
        "support_infill_rate": { "value": "20" },
        "support_offset": { "value": "2" },
        "top_bottom_pattern": { "value": "'zigzag'" },
        "top_bottom_pattern_0": { "value": "'zigzag'" },
        "travel_avoid_other_parts": { "value": "False" },
        "z_seam_type": { "value": "'shortest'" },
        "zig_zaggify_infill": { "value": "True" }
    }
}