ultimaker2.def.json 5.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108
  1. {
  2. "version": 2,
  3. "name": "Ultimaker 2",
  4. "inherits": "ultimaker",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Ultimaker",
  9. "manufacturer": "Ultimaker B.V.",
  10. "file_formats": "text/x-gcode",
  11. "platform": "ultimaker2_platform.obj",
  12. "exclude_materials": [
  13. "generic_hips",
  14. "generic_petg",
  15. "structur3d_dap100silicone",
  16. "ultimaker_petg_red",
  17. "ultimaker_petg_blue",
  18. "ultimaker_petg_grey",
  19. "ultimaker_petg_black",
  20. "ultimaker_petg_green",
  21. "ultimaker_petg_white",
  22. "ultimaker_petg_orange",
  23. "ultimaker_petg_silver",
  24. "ultimaker_petg_yellow",
  25. "ultimaker_petg_transparent",
  26. "ultimaker_petg_red_translucent",
  27. "ultimaker_petg_blue_translucent",
  28. "ultimaker_petg_green_translucent",
  29. "ultimaker_petg_yellow_fluorescent"
  30. ],
  31. "firmware_file": "MarlinUltimaker2.hex",
  32. "has_machine_quality": true,
  33. "has_materials": false,
  34. "machine_extruder_trains": { "0": "ultimaker2_extruder_0" },
  35. "platform_offset": [
  36. 9,
  37. 0,
  38. 0
  39. ],
  40. "platform_texture": "Ultimaker2backplate.png",
  41. "preferred_variant_name": "0.4 mm",
  42. "weight": 3
  43. },
  44. "overrides":
  45. {
  46. "cool_fan_speed_0": { "value": 0 },
  47. "gantry_height": { "value": "48" },
  48. "layer_height_0": { "value": 0.3 },
  49. "machine_acceleration": { "default_value": 3000 },
  50. "machine_center_is_zero": { "default_value": false },
  51. "machine_depth": { "default_value": 223 },
  52. "machine_disallowed_areas":
  53. {
  54. "default_value": [
  55. [
  56. [-115, 112.5],
  57. [-82, 112.5],
  58. [-84, 102.5],
  59. [-115, 102.5]
  60. ],
  61. [
  62. [115, 112.5],
  63. [115, 102.5],
  64. [110, 102.5],
  65. [108, 112.5]
  66. ],
  67. [
  68. [-115, -112.5],
  69. [-115, -104.5],
  70. [-84, -104.5],
  71. [-82, -112.5]
  72. ],
  73. [
  74. [115, -112.5],
  75. [108, -112.5],
  76. [110, -104.5],
  77. [115, -104.5]
  78. ]
  79. ]
  80. },
  81. "machine_end_gcode": { "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"" },
  82. "machine_gcode_flavor": { "default_value": "UltiGCode" },
  83. "machine_head_with_fans_polygon":
  84. {
  85. "default_value": [
  86. [-42, 12],
  87. [-42, -32],
  88. [62, 12],
  89. [62, -32]
  90. ]
  91. },
  92. "machine_heated_bed": { "default_value": true },
  93. "machine_height": { "default_value": 205 },
  94. "machine_max_feedrate_x": { "default_value": 300 },
  95. "machine_max_feedrate_y": { "default_value": 300 },
  96. "machine_max_feedrate_z": { "default_value": 40 },
  97. "machine_name": { "default_value": "Ultimaker 2" },
  98. "machine_nozzle_head_distance": { "default_value": 3 },
  99. "machine_nozzle_tip_outer_diameter": { "default_value": 1 },
  100. "machine_start_gcode": { "value": "\"G0 F3000 Y50 ;avoid prime blob\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E10 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 Y50 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\"" },
  101. "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
  102. "machine_width": { "default_value": 223 },
  103. "material_bed_temperature": { "maximum_value": "110" },
  104. "material_bed_temperature_layer_0": { "maximum_value": "110" },
  105. "speed_slowdown_layers": { "value": 2 },
  106. "support_z_distance": { "value": "0.1" }
  107. }
  108. }