Cura/resources/definitions/dagoma_discoeasy200_bicolor.def.json

{
    "version": 2,
    "name": "Dagoma DiscoEasy200 Bicolor",
    "inherits": "dagoma_disco",
    "metadata":
    {
        "visible": true,
        "author": "Dagoma",
        "manufacturer": "Dagoma",
        "file_formats": "text/x-gcode",
        "platform": "dagoma_discoeasy200_bicolor.3mf",
        "has_machine_quality": true,
        "has_materials": true,
        "machine_extruder_trains":
        {
            "0": "dagoma_discoeasy200_extruder_0",
            "1": "dagoma_discoeasy200_extruder_1"
        },
        "platform_offset": [
            0,
            -57.3,
            -11
        ],
        "preferred_material": "chromatik_pla"
    },
    "overrides":
    {
        "machine_end_gcode": { "default_value": ";Begin End Gcode for Dagoma DiscoEasy 200 Bicolor\n\nM106 S255 ;Fan on full\nM104 S0 ;Cool hotend\nM140 S0 ;Cool heated bed\nG91 ;Relative positioning\nG1 E-3 F5000 ;Retract filament to stop oozing\nG1 E-60 F5000 ;Retract filament multi-extruder\nG0 Z+3 ;Withdraw\nG90 ; Absolute positioning\nG28 X Y ;Home\nM109 R{material_standby_temperature} ;Wait until head has cooled to standby temp\nM107 ;Fan off\nM18 ;Stepper motors off\n\n;Finish End Gcode for Dagoma DiscoEasy 200 Bicolor\n" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_extruders_share_heater": { "default_value": true },
        "machine_name": { "default_value": "Dagoma DiscoEasy200 Bicolor" },
        "machine_start_gcode": { "default_value": ";Begin Start Gcode for Dagoma DiscoEasy 200 Bicolor\n;Sliced: {date} {time}\n;Initial extruder: {initial_extruder_nr}\n\nG90 ;Absolute positioning\nM106 S255 ;Fan on full\nG28 X Y ;Home stop X Y\nG1 X100 ;Centre back during cooldown in case of oozing\nM109 R{material_standby_temperature} ;Cooldown in case too hot\nG28 ;Centre\nG29 ;Auto-level\nM104 S{material_print_temperature_layer_0} ;Pre-heat\nM107 ;Fan off\nG0 X100 Y5 Z0.5 ;Front centre for degunk\nM109 S{material_print_temperature_layer_0} ;Wait for initial temp\n;M83 ;E Relative\n;G1 E60 F3000 ;Reverse multi-extruder retract\n;G1 E10 F200 ;Degunk\n;G1 E-3 F5000 ;Retract\nG0 Z3 ;Withdraw\n;M82 ;E absolute\n;G92 E0 ;E reset\n;G1 F6000 ;Set feedrate\n\n;Finish Start Gcode for Dagoma DiscoEasy 200 Bicolor\n" }
    }
}