ultimaker_s3_bb0.8.inst.cfg 1.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263
  1. [general]
  2. name = BB 0.8
  3. version = 4
  4. definition = ultimaker_s3
  5. [metadata]
  6. setting_version = 20
  7. type = variant
  8. hardware_type = nozzle
  9. [values]
  10. acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
  11. acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
  12. acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
  13. acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
  14. brim_width = 3
  15. cool_fan_speed = 50
  16. cool_min_speed = 5
  17. infill_overlap = 0
  18. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  19. infill_wipe_dist = 0
  20. jerk_print = 25
  21. layer_height = 0.2
  22. machine_min_cool_heat_time_window = 15
  23. machine_nozzle_heat_up_speed = 1.5
  24. machine_nozzle_id = BB 0.8
  25. machine_nozzle_size = 0.8
  26. machine_nozzle_tip_outer_diameter = 2.0
  27. material_print_temperature = =default_material_print_temperature + 10
  28. material_standby_temperature = 100
  29. multiple_mesh_overlap = 0
  30. prime_tower_enable = False
  31. prime_tower_wipe_enabled = True
  32. raft_acceleration = =acceleration_layer_0
  33. raft_airgap = 0
  34. raft_base_speed = 20
  35. raft_base_thickness = 0.3
  36. raft_interface_line_spacing = 0.5
  37. raft_interface_line_width = 0.5
  38. raft_interface_speed = 20
  39. raft_interface_thickness = 0.2
  40. raft_margin = 10
  41. raft_speed = 25
  42. raft_surface_layers = 1
  43. retraction_hop = 2
  44. retraction_hop_only_when_collides = True
  45. retraction_min_travel = =line_width * 3
  46. skin_overlap = 5
  47. speed_layer_0 = 20
  48. speed_print = 35
  49. speed_support = =math.ceil(speed_print * 25 / 35)
  50. speed_support_interface = =math.ceil(speed_support * 20 / 25)
  51. speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
  52. speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
  53. speed_prime_tower = =math.ceil(speed_print * 7 / 35)
  54. support_angle = 60
  55. support_bottom_height = =layer_height * 2
  56. support_interface_enable = True
  57. support_z_distance = 0
  58. switch_extruder_prime_speed = 15
  59. switch_extruder_retraction_amount = 12
  60. top_bottom_thickness = 1
  61. wall_0_inset = 0