um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg 1.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142
  1. [general]
  2. version = 4
  3. name = Extra Fast
  4. definition = ultimaker_s3
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = verydraft
  9. weight = -2
  10. material = generic_pla
  11. variant = AA 0.4
  12. is_experimental = True
  13. [values]
  14. infill_sparse_density = 15
  15. acceleration_print = 2000
  16. acceleration_wall = 1500
  17. acceleration_wall_0 = 1000
  18. acceleration_topbottom = 1000
  19. speed_print = 50
  20. speed_wall = 50
  21. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  22. cool_fan_speed_max = =cool_fan_speed
  23. material_print_temperature = =default_material_print_temperature + 10
  24. machine_nozzle_cool_down_speed = 0.75
  25. machine_nozzle_heat_up_speed = 1.6
  26. material_standby_temperature = 100
  27. material_shrinkage_percentage_xy = 100.2
  28. material_shrinkage_percentage_z = 100.1
  29. prime_tower_enable = False
  30. retraction_prime_speed = =retraction_speed
  31. skin_overlap = 20
  32. top_bottom_thickness = 0.9
  33. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  34. raft_airgap = =0.25
  35. wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)