renkforce_rf100_v2.def.json 6.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228
  1. {
  2. "version": 2,
  3. "name": "Renkforce RF100 V2",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "author": "Simon Peter (based on RF100.ini by Conrad Electronic SE)",
  7. "file_formats": "text/x-gcode",
  8. "manufacturer": "Renkforce",
  9. "visible": true,
  10. "machine_extruder_trains":
  11. {
  12. "0": "renkforce_rf100_extruder_0"
  13. }
  14. },
  15. "overrides": {
  16. "adhesion_type": {
  17. "default_value": "skirt"
  18. },
  19. "bottom_thickness": {
  20. "value": "0.6"
  21. },
  22. "brim_width": {
  23. "value": "3.0"
  24. },
  25. "cool_fan_enabled": {
  26. "value": "True"
  27. },
  28. "cool_fan_full_at_height": {
  29. "value": "0.5"
  30. },
  31. "cool_fan_speed_max": {
  32. "value": "100.0"
  33. },
  34. "cool_fan_speed_min": {
  35. "value": "100.0"
  36. },
  37. "cool_lift_head": {
  38. "value": "True"
  39. },
  40. "cool_min_layer_time": {
  41. "value": "1.0"
  42. },
  43. "cool_min_speed": {
  44. "value": "5.0"
  45. },
  46. "infill_before_walls": {
  47. "value": "True"
  48. },
  49. "infill_line_width": {
  50. "value": "0.6"
  51. },
  52. "infill_overlap": {
  53. "value": "15.0"
  54. },
  55. "infill_sparse_density": {
  56. "value": "26.0"
  57. },
  58. "ironing_enabled": {
  59. "value": "True"
  60. },
  61. "layer_0_z_overlap": {
  62. "value": "0.11"
  63. },
  64. "layer_height_0": {
  65. "value": "0.3"
  66. },
  67. "machine_depth": {
  68. "value": "120"
  69. },
  70. "machine_end_gcode": {
  71. "default_value": ";End GCode\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-4 F300 ;move Z up a bit and retract filament even more\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG0 Z{machine_height} F1800 ;move the platform all the way down\nG28 X0 Y0 F1800 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM117 Done"
  72. },
  73. "machine_gcode_flavor": {
  74. "default_value": "RepRap (Marlin/Sprinter)"
  75. },
  76. "machine_head_with_fans_polygon":
  77. {
  78. "default_value": [
  79. [-26, -27],
  80. [38, -27],
  81. [38, 55],
  82. [-26, 55]
  83. ]
  84. },
  85. "gantry_height": {
  86. "value": "8"
  87. },
  88. "machine_height": {
  89. "value": "120"
  90. },
  91. "machine_name": {
  92. "default_value": "Renkforce RF100 V2"
  93. },
  94. "machine_start_gcode": {
  95. "default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG1 Z5.0 F1800 ;move Z to 5mm\nG28 X0 Y0 F1800 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstop\nG92 E0 ;zero the extruded length\nG1 F200 E6.0 ;extrude 6.0mm of feed stock to build pressure\nG1 Z5.0 F300 ;move the platform down 5mm\nG92 E0 ;zero the extruded length again\nG1 F1800\n;Put printing message on LCD screen\nM117 Printing..."
  96. },
  97. "machine_width": {
  98. "value": "120"
  99. },
  100. "material_bed_temperature": {
  101. "enabled": false
  102. },
  103. "material_flow": {
  104. "value": "110"
  105. },
  106. "material_print_temperature": {
  107. "value": "210.0"
  108. },
  109. "ooze_shield_enabled": {
  110. "value": "True"
  111. },
  112. "raft_airgap": {
  113. "value": "0.33"
  114. },
  115. "raft_base_line_spacing": {
  116. "value": "3.0"
  117. },
  118. "raft_base_line_width": {
  119. "value": "1.0"
  120. },
  121. "raft_base_thickness": {
  122. "value": "0.3"
  123. },
  124. "raft_interface_line_spacing": {
  125. "value": "3.0"
  126. },
  127. "raft_interface_line_width": {
  128. "value": "0.4"
  129. },
  130. "raft_interface_thickness": {
  131. "value": "0.27"
  132. },
  133. "raft_margin": {
  134. "value": "6.0"
  135. },
  136. "raft_speed": {
  137. "value": "20.0"
  138. },
  139. "raft_surface_layers": {
  140. "value": "2"
  141. },
  142. "raft_surface_line_spacing": {
  143. "value": "0.4"
  144. },
  145. "raft_surface_line_width": {
  146. "value": "0.4"
  147. },
  148. "raft_surface_thickness": {
  149. "value": "0.1"
  150. },
  151. "retraction_amount": {
  152. "value": "5.0"
  153. },
  154. "retraction_combing": {
  155. "value": "'all'"
  156. },
  157. "retraction_enable": {
  158. "value": "True"
  159. },
  160. "retraction_min_travel": {
  161. "value": "1.5"
  162. },
  163. "skin_overlap": {
  164. "value": "15.0"
  165. },
  166. "skirt_brim_minimal_length": {
  167. "value": "150.0"
  168. },
  169. "skirt_gap": {
  170. "value": "3.0"
  171. },
  172. "skirt_line_count": {
  173. "value": "3"
  174. },
  175. "speed_infill": {
  176. "value": "50.0"
  177. },
  178. "speed_layer_0": {
  179. "value": "15.0"
  180. },
  181. "speed_print": {
  182. "value": "50.0"
  183. },
  184. "speed_topbottom": {
  185. "value": "30.0"
  186. },
  187. "speed_travel": {
  188. "value": "50.0"
  189. },
  190. "speed_wall_0": {
  191. "value": "25.0"
  192. },
  193. "speed_wall_x": {
  194. "value": "35.0"
  195. },
  196. "support_angle": {
  197. "value": "60.0"
  198. },
  199. "support_enable": {
  200. "value": "False"
  201. },
  202. "support_infill_rate": {
  203. "value": "15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15"
  204. },
  205. "support_line_width": {
  206. "value": "0.6"
  207. },
  208. "support_pattern": {
  209. "default_value": "lines"
  210. },
  211. "support_type": {
  212. "default_value": "everywhere"
  213. },
  214. "support_xy_distance": {
  215. "value": "0.7"
  216. },
  217. "support_z_distance": {
  218. "value": "0.35"
  219. },
  220. "top_bottom_thickness": {
  221. "value": "0.8"
  222. },
  223. "wall_thickness": {
  224. "value": "0.8"
  225. }
  226. }
  227. }