felixtec4dual.def.json 3.5 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556
  1. {
  2. "version": 2,
  3. "name": "Felix Tec 4 Dual",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "kerog777@gmail.com",
  8. "manufacturer": "Felix",
  9. "platform": "FelixTec4_platform.3mf",
  10. "platform_offset": [-128,0, 102],
  11. "machine_extruder_trains":
  12. {
  13. "0": "felixtec4_dual_extruder_0",
  14. "1": "felixtec4_dual_extruder_1"
  15. },
  16. "file_formats": "text/x-gcode",
  17. "has_variants": true,
  18. "has_materials": true,
  19. "preferred_variant_name": "0.35 mm",
  20. "variants_name": "Nozzle Diam"
  21. },
  22. "overrides": {
  23. "machine_name": { "default_value": "FelixTec4Dual" },
  24. "layer_height": { "default_value": 0.2 },
  25. "layer_height_0": { "default_value": 0.3 },
  26. "infill_sparse_density": { "default_value": 20 },
  27. "wall_thickness": { "value": "1" },
  28. "top_bottom_thickness": { "default_value": 1 },
  29. "infill_pattern": { "value": "'tetrahedral'" },
  30. "machine_width": { "default_value": 255 },
  31. "machine_depth": { "default_value": 205 },
  32. "machine_height": { "default_value": 225 },
  33. "machine_heated_bed": { "default_value": true },
  34. "machine_gcode_flavor": { "default_value": "Repetier" },
  35. "machine_center_is_zero": { "default_value": false },
  36. "speed_print": { "default_value": 60 },
  37. "retraction_amount": { "default_value": 1 },
  38. "retraction_speed": { "default_value": 50},
  39. "material_flow": { "default_value": 95 },
  40. "adhesion_type": { "default_value": "skirt" },
  41. "skirt_brim_minimal_length": { "default_value": 130},
  42. "machine_start_gcode": {
  43. "default_value": "; FELIXprinters | www.FELIXprinters.com | Zeemanlaan 15 3401 MV IJsselstein The Netherlands\n; FELIX Tec 4 | Start Code Dual Extruders v1.0\n; Modified by kerog777@gmail.com\n;================================ \n;Initializing\nM80 ; Turn on the power supply\nM107 ; Turn off fans\nM117 Heating up\nM190 S{material_bed_temperature} ; Heatup Bed\nM104 T0 S120\nM104 T1 S120\nG28 ; Home all\nM109 T0 S{material_print_temperature_layer_0} ; Heatup hot-end\nM117 Purging\nT0 ; Select extruder 1\nG92 E0 ; Reset extruder\nG1 X10.0 Y1.1 Z5.0 F15240 ; Move to start-line position\nG1 Z0.3 F15240 ; Move z up\nG1 X127.0 Y1.1 Z0.3 F1500.0 E15 ; Purge 1st line\nG92 E0 ; Reset extruder\n\n;================================ ; Initializing done\nM117 FELIXprinting"
  44. },
  45. "machine_end_gcode": {
  46. "default_value": "; FELIXprinters End Code Tec Series v1.0\n; Modified by kerog777@gmail.com\n; ================================= \n; Move extruder to park position\nG91 ; Make coordinates relative\nG1 Z2 F1000 ; Move z 2mm up\nG90 ; Use absolute coordinates again\nG1 X0 Y0 F15240 ; Move bed and printhead to ergonomic position\n\n; ================================= ; Turn off heaters\nM140 S0 ; Turn off bed heater\nT0 ; Select left extruder\nM104 T0 S0 ; Turn off heater and continue\nG92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT1 ; Select right extruder\nM104 T1 S0 ; Turn off heater and continue\nG92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT0 ; Select left extruder\n\n; ================================= ; Turn the rest off\nM107 ; Turn off fan\nM84 ; Disable steppers\nM117 Finished Printing!"
  47. }
  48. }
  49. }