Cura/resources/variants/ultimaker2_plus_0.25.inst.cfg

[general]
name = 0.25 mm
version = 4
definition = ultimaker2_plus

[metadata]
setting_version = 14
type = variant
hardware_type = nozzle

[values]
coasting_min_volume = 0.17
coasting_volume = 0.1
machine_nozzle_size = 0.25
machine_nozzle_tip_outer_diameter = 0.8
raft_airgap = 0.25
speed_topbottom = =round(speed_print / 1.5, 1)
speed_wall = =round(speed_print / 1.2, 1)
speed_wall_0 = =1 if speed_wall < 5 else (speed_wall - 5)