| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374 |
- [general]
- definition = ultimaker_s5
- name = Extra Fast
- version = 4
- [metadata]
- material = ultimaker_petg
- quality_type = verydraft
- setting_version = 24
- type = quality
- variant = AA 0.8
- weight = -3
- [values]
- acceleration_infill = =acceleration_print
- acceleration_ironing = 1000
- acceleration_layer_0 = =acceleration_wall_0
- acceleration_print = 3500
- acceleration_roofing = =acceleration_wall_0
- acceleration_topbottom = =acceleration_wall
- acceleration_wall = =acceleration_infill
- acceleration_wall_0 = 1500
- acceleration_wall_x = =acceleration_wall
- bridge_skin_material_flow = 100
- bridge_skin_speed = =bridge_wall_speed
- bridge_sparse_infill_max_density = 50
- bridge_wall_material_flow = 100
- bridge_wall_speed = 20
- cool_min_layer_time = 4
- gradual_flow_discretisation_step_size = 0.2
- gradual_flow_enabled = True
- infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
- infill_sparse_density = 15
- jerk_infill = =jerk_print
- jerk_layer_0 = =jerk_wall_0
- jerk_print = =max(30, speed_print/2)
- jerk_roofing = =jerk_wall_0
- jerk_topbottom = =jerk_wall
- jerk_wall = =jerk_infill
- jerk_wall_0 = =max(30, speed_wall_0/2)
- machine_nozzle_cool_down_speed = 1.4
- machine_nozzle_heat_up_speed = 1.7
- material_extrusion_cool_down_speed = 0.7
- material_flow = 93
- material_max_flowrate = 23
- material_print_temperature = =default_material_print_temperature - 5
- max_flow_acceleration = 1
- optimize_wall_printing_order = False
- prime_tower_enable = True
- retraction_amount = 3.5
- retraction_prime_speed = 15
- retraction_speed = 45
- small_skin_on_surface = False
- small_skin_width = 4
- speed_infill = =speed_print
- speed_ironing = 20
- speed_layer_0 = 30
- speed_prime_tower = =speed_wall_0
- speed_print = 75
- speed_roofing = =math.ceil(speed_wall*(45/100))
- speed_support_interface = =speed_wall_0
- speed_topbottom = =speed_print
- speed_wall = =speed_infill
- speed_wall_0 = =math.ceil(speed_wall*(30/75))
- speed_wall_x = =speed_wall
- speed_wall_x_roofing = =speed_roofing
- support_angle = 70
- support_interface_enable = False
- support_structure = tree
- top_bottom_thickness = =max(1.2 , layer_height * 6)
- wall_0_wipe_dist = 0.8
- wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
- zig_zaggify_infill = True
|
