Cura/resources/quality/ultimaker_methodx/um_methodx_labs_basf-ultrafuse-316l-175_0.15mm.inst.cfg

[general]
definition = ultimaker_methodx
name = Normal - Experimental
version = 4

[metadata]
is_experimental = True
material = basf_ultrafuse_316l_175
quality_type = fast
setting_version = 24
type = quality
variant = LABS
weight = -1

[values]
adhesion_type = skirt
bottom_thickness = =top_bottom_thickness
cool_fan_full_at_height = 0
infill_angles = [45,135]
infill_overlap = 25
infill_sparse_density = 100
initial_layer_line_width_factor = 110
layer_height_0 = =layer_height * 1.5
material_flow_layer_0 = 110
material_initial_print_temperature = 245
retraction_amount = 1.5
retraction_speed = 45
roofing_line_width = 0.4
skin_line_width = 0.45
skin_material_flow_layer_0 = 110
skin_overlap = 20.0
skirt_brim_line_width = 1
skirt_brim_minimal_length = 100.0
skirt_height = 3
speed_print = 25
support_enable = False
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness
wall_0_material_flow_layer_0 = 110
wall_x_material_flow_layer_0 = 110