| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960 |
- [general]
- definition = ultimaker_method
- name = Fast
- version = 4
- [metadata]
- material = ultimaker_nylon-cf_175
- quality_type = draft
- setting_version = 24
- type = quality
- variant = 1C
- weight = -2
- [values]
- cool_fan_enabled = True
- cool_fan_speed_max = 65
- cool_min_layer_time = 3.5
- cool_min_speed = 7
- cool_min_temperature = =default_material_print_temperature-5
- initial_layer_line_width_factor = 120
- material_final_print_temperature = =default_material_print_temperature-5
- material_initial_print_temperature = =default_material_print_temperature-5
- raft_airgap = 0.18
- raft_base_infill_overlap = 5
- raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2
- raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1
- raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5
- raft_interface_flow = 105
- raft_interface_infill_overlap = 25
- raft_interface_speed = =raft_speed * 7
- raft_interface_z_offset = -0.08
- raft_surface_flow = 105
- raft_surface_infill_overlap = 35
- raft_surface_line_spacing = 0.42
- raft_surface_speed = =raft_speed * 7
- raft_surface_thickness = 0.27
- raft_surface_z_offset = -0.08
- retraction_amount = 0.5
- retraction_min_travel = 3.2
- skin_overlap = 10
- small_skin_width = 3.6
- speed_prime_tower = =speed_print * 0.25
- speed_print = 120.0
- speed_roofing = =speed_print * 11/24
- speed_topbottom = =speed_roofing
- speed_wall_0 = =speed_print * 9/24
- speed_wall_x = =speed_print * 13/24
- support_angle = 50
- support_bottom_density = 24
- support_bottom_distance = =layer_height
- support_bottom_enable = False
- support_bottom_line_width = 0.6
- support_bottom_stair_step_height = 0
- support_infill_rate = 12.0
- support_line_width = =line_width * 0.75
- support_material_flow = 90
- support_roof_density = 85
- support_xy_distance = 0.3
- support_z_distance = =layer_height
|
