Cura/resources/quality/fusion3/fusion3_0.8_PC_rapid.inst.cfg

[general]
definition = fusion3
name = Rapid Quality
version = 4

[metadata]
material = generic_pc_175
quality_type = rapid
setting_version = 24
type = quality
variant = 0.8mm Nozzle

[values]
adhesion_type = brim
cool_fan_enabled = False
cool_min_layer_time = 5
infill_overlap = 15
infill_sparse_density = 30
inset_direction = outside_in
layer_height_0 = 0.4
line_width = 0.8
material_bed_temperature = 130
material_flow = 100
material_flow_layer_0 = 100
material_print_temperature = 295
retract_at_layer_change = False
retraction_amount = 5
retraction_combing = noskin
retraction_combing_max_distance = 10
retraction_speed = 115
speed_layer_0 = 25
speed_print = 50
support_angle = 45
support_enable = True
support_infill_rate = 30
top_bottom_thickness = 1.2
wall_thickness = 1.6
xy_offset_layer_0 = -0.25
zig_zaggify_infill = True