| 1234567891011121314151617181920212223242526272829303132333435363738 |
- {
- "version": 2,
- "name": "Longer LK4 X",
- "inherits": "longer_base",
- "metadata":
- {
- "visible": true,
- "platform": "longer_235mm_platform.stl",
- "platform_offset": [
- -117.5,
- -3,
- 117.5
- ],
- "quality_definition": "longer_base"
- },
- "overrides":
- {
- "gantry_height": { "value": 35 },
- "machine_depth": { "default_value": 220 },
- "machine_head_with_fans_polygon":
- {
- "default_value": [
- [-55, 20],
- [-55, -36],
- [35, -36],
- [35, 20]
- ]
- },
- "machine_height": { "default_value": 250 },
- "machine_name": { "default_value": "LONGER LK4 X" },
- "machine_start_gcode": { "default_value": "; -- LONGER BL-TOUCH Start G-code --\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\n\n; confirm BL-touch safety\nM280 P0 S160 ; BL-Touch Alarm release\nG4 P100 ; Delay for BL-Touch\n\n; homing\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\n\n; reconfirm BL-touch safety\nM280 P0 S160 ; BL-Touch Alarm realease\nG4 P100 ; Delay for BL-Touch\n\n; bed leveling\nG29; Auto leveling\nM420 Z5 ; set LEVELING_FADE_HEIGHT\nM500 ; save data of G29 and M420\nM420 S1 ; enable bed leveling\n\n; prepare hot-end\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y150.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y150.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish\n; -- end of LONGER BL-TOUCH Start G-code --" },
- "machine_width": { "default_value": 220 },
- "retraction_amount": { "value": 2.0 },
- "retraction_combing": { "value": "'noskin'" },
- "speed_travel": { "value": 65 },
- "z_seam_type": { "value": "'shortest'" }
- }
- }
|
