Cura/resources/quality/twotrees/petg/two_trees_0.4_PETG_standard.inst.cfg

[general]
definition = two_trees_base
name = Standard Quality
version = 4

[metadata]
material = generic_petg
quality_type = standard
setting_version = 23
type = quality
variant = 0.4mm Nozzle

[values]
cool_fan_enabled = True
material_bed_temperature = 80
material_final_print_temperature = =material_print_temperature
material_initial_print_temperature = =material_print_temperature
material_print_temperature = 220
material_print_temperature_layer_0 = 225
material_standby_temperature = =material_print_temperature
retraction_hop = 0.3
retraction_hop_only_when_collides = True