| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687 |
- [general]
- definition = ultimaker_methodxl
- name = Fast
- version = 4
- [metadata]
- material = ultimaker_pla_175
- quality_type = draft
- setting_version = 23
- type = quality
- variant = 1C
- weight = -2
- [values]
- bottom_layers = 4
- cool_fan_enabled = True
- cool_fan_full_layer = 4
- cool_fan_speed = 100
- cool_fan_speed_0 = 0
- cool_min_layer_time = 10
- cool_min_speed = 5
- cool_min_temperature = 205
- default_material_bed_temperature = 45
- infill_sparse_density = 15
- material_bed_temperature = =default_material_bed_temperature
- material_bed_temperature_layer_0 = =default_material_bed_temperature + 5
- material_final_print_temperature = 210
- material_initial_print_temperature = 210
- material_print_temperature = 210
- material_print_temperature_layer_0 = 225
- material_standby_temperature = 160
- min_bead_width = =line_width * 0.75
- min_wall_line_width = =line_width * 0.75
- raft_airgap = 0.18
- raft_base_line_spacing = 4
- raft_base_line_width = 1.2
- raft_base_speed = =raft_speed
- raft_base_thickness = 0.6
- raft_interface_fan_speed = 0
- raft_interface_layers = 2
- raft_interface_line_spacing = 0.7
- raft_interface_speed = 60
- raft_interface_thickness = 0.3
- raft_speed = 30
- raft_surface_fan_speed = 0
- raft_surface_line_spacing = 0.425
- raft_surface_speed = 90
- raft_surface_wall_count = 2
- retract_at_layer_change = True
- skin_material_flow_layer_0 = =material_flow
- speed_layer_0 = 15
- speed_print = 150
- speed_roofing = =speed_print / 3
- speed_support = =speed_print
- speed_support_interface = 65
- speed_topbottom = =speed_print * 0.6
- speed_wall = =speed_print / 6
- speed_wall_0 = =speed_wall
- speed_wall_x = =speed_wall
- support_angle = 50.0
- support_bottom_distance = =layer_height
- support_bottom_enable = False
- support_fan_enable = True
- support_infill_angles = [45 ]
- support_infill_rate = 12
- support_infill_sparse_thickness = =layer_height
- support_interface_density = 83
- support_interface_height = =layer_height * 4
- support_interface_material_flow = =material_flow * 0.9
- support_interface_offset = 1
- support_interface_wall_count = 0
- support_line_width = line_width * 0.75
- support_material_flow = =material_flow * 0.8
- support_offset = 3
- support_roof_density = =support_interface_density
- support_roof_height = =layer_height * 4
- support_roof_line_width = =line_width
- support_roof_material_flow = =support_interface_material_flow
- support_roof_wall_count = 1
- support_xy_distance = 0.3
- support_xy_distance_overhang = 0.1
- support_xy_overrides_z = xy_overrides_z
- support_z_distance = 0.15
- switch_extruder_retraction_amount = 0.5
- wall_0_material_flow_layer_0 = =material_flow
- wall_x_material_flow_layer_0 = =material_flow
|
