liquid_vo0.4_Nylon_Normal_Quality.inst.cfg 1.0 KB

12345678910111213141516171819202122232425262728293031323334353637
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = liquid
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_nylon
  11. variant = VO 0.4
  12. [values]
  13. adhesion_type = brim
  14. cool_min_layer_time_fan_speed_max = 20
  15. cool_min_speed = 12
  16. infill_line_width = =round(line_width * 0.5 / 0.4, 2)
  17. line_width = =machine_nozzle_size
  18. material_initial_print_temperature = =material_print_temperature - 5
  19. material_final_print_temperature = =material_print_temperature - 10
  20. material_standby_temperature = 100
  21. ooze_shield_angle = 40
  22. raft_acceleration = =acceleration_layer_0
  23. raft_airgap = =round(layer_height_0 * 0.85, 2)
  24. raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
  25. raft_jerk = =jerk_layer_0
  26. raft_margin = 10
  27. raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
  28. skin_overlap = 50
  29. speed_layer_0 = =math.ceil(speed_print * 20 / 70)
  30. switch_extruder_prime_speed = 30
  31. switch_extruder_retraction_amount = 30
  32. switch_extruder_retraction_speeds = 40
  33. wall_line_width_x = =wall_line_width
  34. jerk_travel = 20