Cura/resources/definitions/longer_cube2.def.json

{
    "name": "LONGER Cube2",
    "version": 2,
    "inherits": "longer_base",
    "metadata": {
        "quality_definition": "longer_base",
        "visible": true,
        "platform": "longer_cube2_platform.stl",
        "platform_offset": [-60, -3 ,70]
    },
    "overrides": {
        "machine_name": { "default_value": "LONGER Cube2" },
        "machine_start_gcode": { "default_value": "; LONGER Cube2 Start G-code\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y120.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y120.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish\n" },
        "machine_width": { "default_value": 120 },
        "machine_depth": { "default_value": 140 },
        "machine_height": { "default_value": 105 },

        "machine_head_with_fans_polygon": { "default_value": [
                [-22, 31],
                [-22, -21],
                [14, -21],
                [14, 31]
            ]
        },

        "gantry_height": { "value": 18 }
    }
}