| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253 |
- [general]
- definition = ultimaker_s5
- name = Fine
- version = 4
- [metadata]
- material = generic_tpu
- quality_type = normal
- setting_version = 22
- type = quality
- variant = AA 0.4
- weight = 0
- [values]
- bridge_skin_material_flow = 200
- bridge_skin_speed = =bridge_wall_speed
- bridge_sparse_infill_max_density = 50
- bridge_wall_material_flow = =bridge_skin_material_flow
- bridge_wall_speed = 10
- brim_width = 8.75
- gradual_infill_step_height = =5 * layer_height
- infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
- infill_sparse_density = 10
- infill_wipe_dist = 0.1
- machine_min_cool_heat_time_window = 15
- machine_nozzle_cool_down_speed = 0.5
- machine_nozzle_heat_up_speed = 2.5
- material_final_print_temperature = =material_print_temperature - 10
- material_flow = 106
- material_initial_print_temperature = =material_print_temperature - 10
- material_print_temperature = =default_material_print_temperature - 2
- multiple_mesh_overlap = 0
- prime_tower_wipe_enabled = True
- retraction_count_max = 15
- retraction_extra_prime_amount = 0.8
- retraction_hop_only_when_collides = True
- skin_line_width = =round(line_width / 0.8, 2)
- speed_print = 25
- speed_topbottom = =math.ceil(speed_print * 0.8)
- speed_wall = =math.ceil(speed_print * 25 / 25)
- speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
- support_angle = 50
- support_bottom_distance = =support_z_distance
- support_interface_enable = True
- support_top_distance = =support_z_distance
- support_z_distance = =math.ceil(0.3/layer_height)*layer_height
- switch_extruder_prime_speed = 15
- switch_extruder_retraction_amount = 20
- switch_extruder_retraction_speeds = 35
- top_bottom_thickness = =layer_height * 6
- travel_avoid_distance = 1.5
- wall_0_inset = 0
|
