Cura/resources/definitions/skriware_2.def.json

{
    "name": "Skriware 2",
    "version": 2,
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Skriware",
        "manufacturer": "Skriware",
        "category": "Other",
        "file_formats": "text/x-gcode",
        "platform_offset": [
            0,
            0,
            0
        ],
        "supports_usb_connection": false,
        "platform": "skriware_2_platform.stl",
        "machine_extruder_trains": {
            "0": "skriware_2_extruder_0",
            "1": "skriware_2_extruder_1"
        }
    },
    "overrides": {
        "jerk_print_layer_0": {
            "value": "5"
        },
        "jerk_prime_tower": {
            "value": "5"
        },
        "expand_skins_expand_distance": {
            "value": "1.2"
        },
        "jerk_support_interface": {
            "value": "5"
        },
        "jerk_travel_layer_0": {
            "value": "5.0"
        },
        "wipe_retraction_prime_speed": {
            "value": "30"
        },
        "material_standby_temperature": {
            "default_value": 195
        },
        "acceleration_support_bottom": {
            "value": "250"
        },
        "raft_base_line_width": {
            "value": "0.5"
        },
        "raft_speed": {
            "value": "30.0"
        },
        "jerk_topbottom": {
            "value": "5"
        },
        "ironing_inset": {
            "value": "0.2"
        },
        "acceleration_wall": {
            "value": "250"
        },
        "cross_infill_pocket_size": {
            "value": "5.333333333333333"
        },
        "jerk_support_roof": {
            "value": "5"
        },
        "acceleration_print": {
            "default_value": 250
        },
        "meshfix_maximum_travel_resolution": {
            "value": "0.8"
        },
        "support_top_distance": {
            "value": "0.22"
        },
        "acceleration_enabled": {
            "default_value": true
        },
        "optimize_wall_printing_order": {
            "default_value": true
        },
        "jerk_layer_0": {
            "value": "5"
        },
        "infill_line_distance": {
            "value": "5.333333333333333"
        },
        "acceleration_ironing": {
            "value": "250"
        },
        "material_print_temperature_layer_0": {
            "value": "195"
        },
        "bridge_skin_speed_2": {
            "value": "15"
        },
        "acceleration_travel": {
            "value": "250"
        },
        "switch_extruder_retraction_speed": {
            "value": "30"
        },
        "jerk_print": {
            "default_value": 5
        },
        "material_guid": {
            "default_value": "0ff92885-617b-4144-a03c-9989872454bc"
        },
        "raft_interface_acceleration": {
            "value": "250"
        },
        "acceleration_support_interface": {
            "value": "250"
        },
        "cool_fan_full_layer": {
            "value": "1"
        },
        "skirt_brim_minimal_length": {
            "default_value": 50
        },
        "material_bed_temperature": {
            "value": "50"
        },
        "speed_slowdown_layers": {
            "default_value": 1
        },
        "speed_travel": {
            "value": "150"
        },
        "skin_overlap": {
            "value": "15"
        },
        "acceleration_infill": {
            "value": "250"
        },
        "support_roof_material_flow": {
            "value": "99"
        },
        "raft_base_jerk": {
            "value": "5"
        },
        "retraction_retract_speed": {
            "value": "30"
        },
        "infill_wipe_dist": {
            "value": "0.1"
        },
        "jerk_wall_x": {
            "value": "5"
        },
        "layer_height": {
            "default_value": 0.2
        },
        "bottom_skin_expand_distance": {
            "value": "1.2"
        },
        "machine_start_gcode": {
            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 X0 Y0;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM420 S1 Z0.9 ;enable bed levelling\nG1 Z10 F250 ;move the platform down 10mm\nM107 ;fan off\nM42 P11 S255 ;turn on front fan\nM140 S{material_bed_temperature}\nM104 T0 S{material_print_temperature}\nM104 T1 S{material_print_temperature}\nG1 F2500 Y260\nM190 S{material_bed_temperature}\nM109 T0 S{material_print_temperature}\nM109 T1 S{material_print_temperature}\nM60 ;enable E-FADE Algorithm\nM62 A ;filament sensor off\nG92 E0 ;zero the extruded length\nT1\nG92 E0;zero the extruded length\nG1 F300 Z0.3\nG1 F1200 X20\nG1 F1200 X180 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15  ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E15\nG1 F300 Z1.5\nG92 E0 ;zero the extruded length again\nT0\nG92 E0 ;zero the extruded length\nG1 F1200 Y258\nG1 F300 Z0.3\nG1 F1200 X40 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E15\nG1 Z1.5\nM61 A\nM63 A ;filament sensor on\nG92 E0 ;zero the extruded length again\nM58 ;end of Start G-Code and signal retract management"
        },
        "travel_retract_before_outer_wall": {
            "default_value": true
        },
        "xy_offset_layer_0": {
            "value": "-0.16"
        },
        "adhesion_type": {
            "default_value": "raft"
        },
        "min_skin_width_for_expansion": {
            "value": "0.671279704941824"
        },
        "support_bottom_material_flow": {
            "value": "99"
        },
        "prime_tower_position_x": {
            "value": "1"
        },
        "machine_depth": {
            "default_value": 260
        },
        "retraction_speed": {
            "default_value": 30
        },
        "support_skip_some_zags": {
            "default_value": true
        },
        "remove_empty_first_layers": {
            "default_value": false
        },
        "z_seam_x": {
            "value": "115"
        },
        "support_xy_distance_overhang": {
            "value": "0.5"
        },
        "acceleration_print_layer_0": {
            "value": "250"
        },
        "support_xy_distance": {
            "default_value": 0.8
        },
        "support_roof_line_distance": {
            "value": "0.5714285714285714"
        },
        "jerk_enabled": {
            "default_value": true
        },
        "min_infill_area": {
            "default_value": 1
        },
        "travel_avoid_supports": {
            "default_value": true
        },
        "bottom_layers": {
            "value": "3"
        },
        "multiple_mesh_overlap": {
            "default_value": 0
        },
        "retraction_hop_enabled": {
            "default_value": true
        },
        "acceleration_topbottom": {
            "value": "250"
        },
        "jerk_wall": {
            "value": "5"
        },
        "jerk_wall_0": {
            "value": "5"
        },
        "skin_overlap_mm": {
            "value": "0.06"
        },
        "retraction_min_travel": {
            "value": "1"
        },
        "support_interface_material_flow": {
            "value": "99"
        },
        "material_diameter": {
            "default_value": 1.75
        },
        "speed_roofing": {
            "value": "30.0"
        },
        "skin_outline_count": {
            "default_value": 0
        },
        "skin_no_small_gaps_heuristic": {
            "default_value": true
        },
        "top_bottom_pattern_0": {
            "value": "'zigzag'"
        },
        "top_skin_expand_distance": {
            "value": "1.2"
        },
        "acceleration_travel_layer_0": {
            "value": "250.0"
        },
        "prime_tower_min_volume": {
            "default_value": 4
        },
        "switch_extruder_retraction_speeds": {
            "default_value": 30
        },
        "skin_preshrink": {
            "value": "1.2"
        },
        "material_bed_temperature_layer_0": {
            "value": "50"
        },
        "support_tree_collision_resolution": {
            "value": "0.2"
        },
        "machine_height": {
            "default_value": 210
        },
        "raft_acceleration": {
            "value": "250"
        },
        "fill_outline_gaps": {
            "default_value": true
        },
        "wall_x_material_flow": {
            "value": "99"
        },
        "jerk_support_bottom": {
            "value": "5"
        },
        "machine_end_gcode": {
            "default_value": "M59\nG92 E1\nG1 E-1 F300\nM104 T0 S0\nM104 T1 S0\nM140 S0\nG28 X0 Y0\nM84\nM106 S0\nM107"
        },
        "infill_sparse_density": {
            "default_value": 15
        },
        "meshfix_maximum_deviation": {
            "default_value": 0.005
        },
        "wall_0_material_flow": {
            "value": "99"
        },
        "material_adhesion_tendency": {
            "default_value": 0
        },
        "prime_tower_flow": {
            "value": "99"
        },
        "prime_tower_position_y": {
            "value": "1"
        },
        "support_material_flow": {
            "value": "99"
        },
        "retract_at_layer_change": {
            "default_value": true
        },
        "machine_extruder_count": {
            "default_value": 2
        },
        "wall_thickness": {
            "value": "1.2"
        },
        "support_infill_sparse_thickness": {
            "value": "resolveOrValue('layer_height')"
        },
        "raft_surface_acceleration": {
            "value": "250"
        },
        "roofing_layer_count": {
            "value": "1"
        },
        "skirt_brim_line_width": {
            "value": "0.5"
        },
        "jerk_support": {
            "value": "5"
        },
        "raft_surface_jerk": {
            "value": "5"
        },
        "speed_equalize_flow_max": {
            "default_value": 40
        },
        "raft_surface_speed": {
            "value": "30.0"
        },
        "jerk_travel": {
            "value": "5"
        },
        "support_zag_skip_count": {
            "value": "8"
        },
        "retraction_combing": {
            "default_value": "infill"
        },
        "raft_interface_line_spacing": {
            "value": "0.4"
        },
        "layer_height_0": {
            "default_value": 0.2
        },
        "extruders_enabled_count": {
            "value": "2"
        },
        "support_line_distance": {
            "value": "1.3333333333333333"
        },
        "support_roof_density": {
            "value": "70"
        },
        "raft_base_line_spacing": {
            "value": "0.8"
        },
        "acceleration_prime_tower": {
            "value": "250"
        },
        "skin_material_flow": {
            "value": "99"
        },
        "support_z_distance": {
            "default_value": 0.22
        },
        "bottom_skin_preshrink": {
            "value": "1.2"
        },
        "jerk_skirt_brim": {
            "value": "5"
        },
        "z_seam_y": {
            "value": "180"
        },
        "skirt_line_count": {
            "default_value": 2
        },
        "raft_margin": {
            "default_value": 4
        },
        "infill_material_flow": {
            "value": "99"
        },
        "wipe_retraction_retract_speed": {
            "value": "30"
        },
        "z_seam_corner": {
            "default_value": "z_seam_corner_weighted"
        },
        "support_roof_height": {
            "value": "0.4"
        },
        "top_layers": {
            "value": "4"
        },
        "support_infill_rate": {
            "value": "30"
        },
        "raft_interface_speed": {
            "value": "35"
        },
        "default_material_print_temperature": {
            "default_value": 195
        },
        "acceleration_layer_0": {
            "value": "250"
        },
        "support_skip_zag_per_mm": {
            "default_value": 10
        },
        "material_initial_print_temperature": {
            "value": "195"
        },
        "raft_interface_jerk": {
            "value": "5"
        },
        "machine_width": {
            "default_value": 210
        },
        "wall_line_count": {
            "value": "3"
        },
        "retraction_amount": {
            "default_value": 3
        },
        "infill_sparse_thickness": {
            "value": "resolveOrValue('layer_height')"
        },
        "support_initial_layer_line_distance": {
            "value": "1.3333333333333333"
        },
        "jerk_support_infill": {
            "value": "5"
        },
        "acceleration_roofing": {
            "value": "250"
        },
        "retraction_extrusion_window": {
            "value": "3"
        },
        "raft_interface_line_width": {
            "value": "0.4"
        },
        "acceleration_support_roof": {
            "value": "250"
        },
        "support_brim_line_count": {
            "value": "16"
        },
        "layer_0_z_overlap": {
            "value": "0.1"
        },
        "support_angle": {
            "default_value": 60
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "raft_surface_thickness": {
            "value": "0.2"
        },
        "cool_min_layer_time": {
            "default_value": 10
        },
        "gantry_height": {
            "value": "210"
        },
        "raft_airgap": {
            "default_value": 0.2
        },
        "acceleration_skirt_brim": {
            "value": "250"
        },
        "skirt_brim_material_flow": {
            "value": "99"
        },
        "jerk_infill": {
            "value": "5"
        },
        "roofing_material_flow": {
            "value": "99"
        },
        "support_use_towers": {
            "default_value": false
        },
        "ooze_shield_angle": {
            "default_value": 50
        },
        "material_flow": {
            "default_value": 99
        },
        "speed_travel_layer_0": {
            "value": "75.0"
        },
        "raft_base_acceleration": {
            "value": "250"
        },
        "retraction_count_max": {
            "default_value": 40
        },
        "ooze_shield_dist": {
            "default_value": 4
        },
        "acceleration_support": {
            "value": "250"
        },
        "max_skin_angle_for_expansion": {
            "default_value": 50
        },
        "coasting_enable": {
            "default_value": true
        },
        "brim_width": {
            "default_value": 10
        },
        "acceleration_support_infill": {
            "value": "250"
        },
        "retraction_prime_speed": {
            "value": "30"
        },
        "raft_base_speed": {
            "value": "35"
        },
        "acceleration_wall_0": {
            "value": "250"
        },
        "xy_offset": {
            "default_value": -0.16
        },
        "prime_tower_size": {
            "default_value": 1
        },
        "jerk_ironing": {
            "value": "5"
        },
        "switch_extruder_prime_speed": {
            "value": "30"
        },
        "raft_jerk": {
            "value": "5"
        },
        "top_skin_preshrink": {
            "value": "1.2"
        },
        "material_print_temperature": {
            "value": "195"
        },
        "wall_material_flow": {
            "value": "99"
        },
        "jerk_roofing": {
            "value": "5"
        },
        "cool_fan_full_at_height": {
            "value": "0"
        },
        "acceleration_wall_x": {
            "value": "250"
        },
        "support_bottom_distance": {
            "value": "0.23"
        },
        "cool_min_speed": {
            "default_value": 15
        },
        "default_material_bed_temperature": {
            "default_value": 50
        },
        "raft_interface_thickness": {
            "value": "0.2"
        }
    }
}