Cura/resources/definitions/creality_cr10max.def.json

{
    "name": "Creality CR-10 Max",
    "version": 2,
    "inherits": "creality_base",
    "overrides": {
        "machine_name": { "default_value": "Creality CR-10 Max" },
        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 Z2 ;Enable ABL using saved Mesh and Fade Height\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
        "machine_width": { "default_value": 450 },
        "machine_depth": { "default_value": 450 },
        "machine_height": { "default_value": 470 },
        "machine_head_with_fans_polygon": { "default_value": [
                [-44, 34],
                [-44, -34],
                [38, -34],
                [38, 34]
            ]
        },

        "gantry_height": { "value": 30 }

    },
    "metadata": {
        "quality_definition": "creality_base",
        "visible": true
    }
}