abax_pri5.def.json 2.2 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859
  1. {
  2. "name": "ABAX PRi5",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "ABAX 3d Technologies",
  8. "manufacturer": "ABAX 3d Technologies",
  9. "file_formats": "text/x-gcode",
  10. "machine_extruder_trains":
  11. {
  12. "0": "abax_pri5_extruder_0"
  13. }
  14. },
  15. "overrides": {
  16. "machine_start_gcode": {
  17. "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z5.0 F200 ;move Z to position 5.0 mm\nG92 E0 ;zero the extruded length\n; -- end of START GCODE --"
  18. },
  19. "machine_end_gcode": {
  20. "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set temp of bed to Zero \nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300 ;move X to min and Y to max \nG90 ;set to absolute positioning\nM84 ;turn off steppers\n; -- end of END GCODE --"
  21. },
  22. "machine_width": {
  23. "default_value": 310
  24. },
  25. "machine_depth": {
  26. "default_value": 310
  27. },
  28. "machine_height": {
  29. "default_value": 300
  30. },
  31. "machine_heated_bed": {
  32. "default_value": false
  33. },
  34. "machine_center_is_zero": {
  35. "default_value": false
  36. },
  37. "machine_gcode_flavor": {
  38. "default_value": "RepRap"
  39. },
  40. "layer_height": {
  41. "default_value": 0.2
  42. },
  43. "layer_height_0": {
  44. "default_value": 0.2
  45. },
  46. "wall_thickness": {
  47. "value": "1"
  48. },
  49. "top_bottom_thickness": {
  50. "default_value": 1
  51. },
  52. "speed_print": {
  53. "default_value": 40
  54. },
  55. "support_enable": {
  56. "default_value": true
  57. }
  58. }
  59. }