1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- [general]
- name = AA 0.25
- version = 4
- definition = ultimaker_s5
- [metadata]
- setting_version = 9
- type = variant
- hardware_type = nozzle
- [values]
- brim_width = 7
- infill_line_width = 0.23
- layer_height_0 = 0.17
- line_width = 0.23
- machine_nozzle_cool_down_speed = 0.85
- machine_nozzle_heat_up_speed = 1.5
- machine_nozzle_id = AA 0.25
- machine_nozzle_size = 0.25
- machine_nozzle_tip_outer_diameter = 0.65
- material_final_print_temperature = =material_print_temperature - 10
- material_initial_print_temperature = =material_print_temperature - 5
- raft_airgap = 0.3
- raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
- raft_interface_line_spacing = =raft_interface_line_width + 0.2
- raft_interface_line_width = =line_width * 2
- raft_interface_thickness = =layer_height * 1.5
- raft_jerk = =jerk_print
- raft_margin = 15
- raft_surface_layers = 2
- retraction_count_max = 25
- retraction_extrusion_window = 1
- retraction_min_travel = 0.7
- retraction_prime_speed = =retraction_speed
- skin_overlap = 15
- speed_layer_0 = 20
- speed_print = 55
- speed_topbottom = 20
- speed_wall = =math.ceil(speed_print * 30 / 55)
- support_angle = 60
- support_bottom_distance = =support_z_distance / 2
- support_pattern = zigzag
- support_top_distance = =support_z_distance
- support_use_towers = True
- support_z_distance = =layer_height * 2
- switch_extruder_prime_speed = =switch_extruder_retraction_speeds
- switch_extruder_retraction_amount = =machine_heat_zone_length
- top_bottom_thickness = 1.2
- wall_line_width_x = 0.23
- wall_thickness = 1.3
|